Reconfiguration of metal-organic frameworks to form ultrafine Bi dots as an excellent high-current performance of lithium-ion battery anode
Source abstract
Abstract
The investigation of Bi-based metal-organic frameworks (Bi-MOFs) as anode materials has garnered significant attention because of their higher lithium storage capacity. Nevertheless, they are prone to structural collapse when undergoing the process of charging and discharging, resulting in irreversible capacity degradation. In this study, we develop novel Bi-MOF and reduced graphene oxide (RGO) composites named Bi-MOF@RGO-x, where “x” represents the amount of RGO incorporated during the synthesis process. As expected, when used as an anode for LIBs, the Bi-MOF@RGO-15 electrode exhibited an excellent capacity of 400 mAh·g −1 and ultra-long cycling stability of more than 3500 cycles at the current density of 10 A·g −1 (the specific capacity is the same as the second cycle). An interesting Bi-MOF@RGO reconfiguration phenomenon could be observed in that amorphous carbon layers and ultra-small bismuth dots could be obtained after repeated charging/discharging. Meanwhile, the amorphous carbon layers could uniformly wrap around the in-situ deposited bismuth dots to act as a buffer against volume fluctuations during bismuth lithiation and delithiation. The in-situ deposited bismuth dots had a shorter Li + transport path, facilitating faster Li + transport to obtain an excellent rate performance. This reconfiguration did not cause the degradation of battery performance, but on the contrary, was an important reason for obtaining high-performance MOF anodes. This study demonstrates that the reconfiguration of Bi-MOF is a favorable anodic conversion process, providing different insights into studying anodes for MOFs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. The path towards sustainable energy10.1038/nmat4834 ↗
2. A review of MOFs and their derivatives for lithium ion battery: Structural design, synthesis strategy and mechanism10.1016/j.jiec.2023.10.004 ↗
3. Exploring anomalous charge storage in anode materials for next-generation Li rechargeable batteries10.1021/acs.chemrev.9b00618 ↗
4. Improved anti-noise adaptive long short-term memory neural network modeling for the robust remaining useful life prediction of lithium-ion batteries10.1016/j.ress.2022.108920 ↗
5. Lithium lanthanum titanate perovskite as an anode for lithium ion batteries10.1038/s41467-020-17233-1 ↗
6. Iodine and nitrogen-codoped carbon microspheres for ultrahigh volumetric capacity of Li-Ion batteries10.1021/acssuschemeng.7b04588 ↗
7. Improved singular filtering-Gaussian process regression-long short-term memory model for whole-life-cycle remaining capacity estimation of lithium-ion batteries adaptive to fast aging and multi-current variations10.1016/j.energy.2023.128677 ↗
8. Layered tin sulfide and selenide anode materials for Li- and Na-ion batteries10.1039/C8TA02695E ↗
9. Construction of rGO-encapsulated Co3O4-CoFe2O4 composites with a double-buffer structure for high-performance lithium storage10.1002/smll.202101080 ↗
10. Cobalt-boron nanoparticles anchored on graphene as anode of lithium ion batteries10.1016/j.cej.2018.11.238 ↗
11. Achieving high energy density for lithium-ion battery anodes by Si/C nanostructure design10.1039/C8TA10936B ↗
12. Fluffy carbon-coated red phosphorus as a highly stable and high-rate anode for lithium-ion batteries10.1039/C9TA02030F ↗
13. A chronicle review of nonsilicon (Sn, Sb, Ge)-based lithium/sodium-ion battery alloying anodes10.1002/smtd.202000218 ↗
14. Electrospun Ta-doped TiO2/C nanofibers as a high-capacity and long-cycling anode material for Li-ion and K-ion batteries10.1039/D0TA06327D ↗
15. Oxygen-deficient Nb2O5-x decorated MCMB anode with much enhanced rate and cycle performances for Li-ion batteries10.1016/j.apsusc.2022.154564 ↗
16. Recent trends in the development of MXenes and MXene-based composites as anode materials for Li-ion batteries10.1016/j.est.2021.103572 ↗
17. A 3D organically synthesized porous carbon material for lithium-ion batteries10.1002/anie.201805924 ↗
18. A bimetallic Ni-Fe MOF nanofiber as high performance anode for enhancing lithium storage10.1021/acsaem.3c02423 ↗
19. Interwoven metal-organic framework on a periodic minimal surface with extra-large pores10.1126/science.1056598 ↗
20. Synthesis and characterization of metal-organic framework-74 containing 2, 4, 6, 8, and 10 different metals10.1021/ic500434a ↗
21. Porous metal-organic framework liquids for enhanced CO2 adsorption and catalytic conversion10.1002/ange.202107156 ↗
22. A MOF glass membrane for gas separation10.1002/ange.201915807 ↗
23. Designing MOF nanoarchitectures for electrochemical water splitting
24. Advanced photoresponsive materials using the metal-organic framework approach10.1002/adma.201905227 ↗
25. Ionic conduction mechanism and design of metal-organic framework based quasi-solid-state electrolytes10.1021/jacs.2c03710 ↗
26. Metal-organic frameworks (MOFs) and MOF-derived materials for energy storage and conversion10.1007/s41918-018-0024-x ↗
27. Transition-metal (Fe, Co, Ni) based metal-organic frameworks for electrochemical energy storage10.1002/aenm.201602733 ↗
28. Advances in transition-metal (Zn, Mn, Cu)-based MOFs and their derivatives for anode of lithium-ion batteries10.1016/j.ccr.2020.213221 ↗
29. Electrochemical in-situ generation of Ni-Mn MOF nanomaterials as anode materials for lithium-ion batteries10.1016/j.jallcom.2023.168926 ↗
30. Facile synthesis of Fe-MOF/RGO and its application as a high performance anode in lithium-ion batteries10.1039/C6RA01645F ↗
31. Hierarchical cobalt-based metal-organic framework for high-performance lithium-ion batteries10.1002/chem.201802629 ↗
32. A fascinating multitasking Cu-MOF/rGO hybrid for high performance supercapacitors and highly sensitive and selective electrochemical nitrite sensors10.1039/C6TA06470A ↗
33. Graphene oxide-templated growth of MOFs with enhanced lithium-storage properties10.1039/C7NJ02846F ↗
34. Two-dimensional flower-like cobalt-porphyrin MOF/rGO composite anodes for high-performance Li-ion batteries10.1016/j.jallcom.2021.160531 ↗
35. Cubic Mn-Ln (LnLa, Ce, Pr) bimetallic metal-organic frameworks for highly stable lithium storage capacity10.1016/j.jallcom.2022.168446 ↗
36. A simple approach to boost capacitance: flexible supercapacitors based on manganese Oxides@MOFs via chemically induced in situ self-transformation10.1002/adma.201600319 ↗
37. Pillared-layer metal-organic frameworks for improved lithium-ion storage performance10.1021/acsami.7b05889 ↗
38. Graphene oxide: preparation, functionalization, and electrochemical applications10.1021/cr300115g ↗
39. Cobalt- and cadmium-based metal-organic frameworks as high-performance anodes for sodium ion batteries and lithium ion batteries10.1021/acsami.6b15757 ↗
40. POM-based metal-organic framework/reduced graphene oxide nanocomposites with hybrid behavior of battery-supercapacitor for superior lithium storage10.1016/j.nanoen.2017.02.028 ↗
41. Flocculent Cu caused by the Jahn-Teller effect improved the performance of Mg-MOF-74 as an anode material for lithium-ion batteries10.1021/acsami.0c17408 ↗
42. Application of two-dimensional layered Mo-MOF@ppy with high valency molybdenum in lithium-ion batteries10.1016/j.colsurfa.2021.127810 ↗
43. Scalable one-pot synthesis of hierarchical Bi@C bulk with superior lithium-ion storage performances10.1021/acsami.0c14757 ↗
44. High-energy-density carbon-coated bismuth nanodots on hierarchically porous molybdenum carbide for superior lithium storage10.1016/j.cej.2021.134276 ↗
45. Bi dots confined by functional carbon as high-performance anode for lithium ion batteries10.1002/adfm.202000756 ↗
46. Bi nanoparticles in situ encapsulated by carbon film as high-performance anode materials for Li-ion batteries10.1016/j.jechem.2022.01.026 ↗
47. Facile fabrication of nitrogen-doped porous carbon as superior anode material for potassium-ion batteries10.1002/aenm.201802386 ↗