journal article·2024-06

Synergistic effect of α-alumina integrated silica ceramic nanocomposites prepared using waste beverage cans and rice husk for corrosion protection application

V. Mahalingam, M. Sivaraju, G. Suresh Kumar, K. Lalithambigai, Nguyen Van Minh, M. Aslam Manthrammel, Mohd. Shkir

Publisher page

Abstract

In this study, we investigated the synergistic effect of α-alumina-integrated silica nanocomposites as a promising material for corrosion protection. We synthesized these nanocomposites in different proportions (90 wt% silica:10 wt% alumina (AS-1) and 70 wt% silica:30 wt% alumina (AS-2)) via ball milling using rice husk and waste beverage cans as the precursor source. XRD, FTIR and EDX analysis of α-Al 2O 3 integrated silica nanocomposites revealed distinct peaks corresponding to both silica and α-Al 2O 3 components, confirming the successful formation of the nanocomposites. FESEM and TEM analyses showed that the α-alumina and silica nanoparticles were agglomerated and inhomogeneous, with sizes ranging from 150 nm to 250 nm. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests showed that pure silica, AS-1, and AS-2 had corrosion rates of 1.7648, 0.4396, and 0.0610 mm/yr, respectively. AS-1 and AS-2 exhibited higher charge transfer resistance (Rct) values of 34.54 KΩ and 48.60 KΩ, respectively, compared to pure silica (24.4 KΩ). Nyquist and Bode plots revealed the improved corrosion resistance of α-alumina-integrated silica nanocomposites compared to pristine silica-based protective coatings on mild steel. It is noted that the amount of α-alumina content enhances the corrosion resistance efficiency of the nanocomposites. The synergistic effect of the α-alumina-integrated silica nanocomposites can be attributed to the improved barrier properties and forming a protective layer on the metal substrate, effectively mitigating the corrosion process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. 〈http://impact.nace.org/documents/Nace-International-Report.pdf〉.
2. Global and economic effects of corrosion - an overview10.1063/5.0092286 ↗
3. Impact of incineration slag co-disposed with municipal solid waste on methane production and methanogens ecology in landfills10.1016/j.biortech.2023.128978 ↗
4. The potential of nanocomposite-based coatings for corrosion protection of metals: a review10.1016/j.molliq.2023.123067 ↗
5. High-entropy rare earth titanates with low thermal conductivity designed by lattice distortion10.1111/jace.19233 ↗
6. Ameliorated longitudinal critically refracted—Attenuation velocity method for welding residual stress measurement10.1016/j.jmatprotec.2017.03.022 ↗
7. Applications of nanomaterials in corrosion protection coatings and inhibitors10.1515/corrrev-2019-0011 ↗
8. Gaussian filtering method of evaluating the elastic/elasto-plastic properties of sintered nanocomposites with quasi-continuous volume distribution10.1016/j.msea.2023.145001 ↗
9. Mesoporous silica nanoparticles as carriers of active agents for smart anticorrosive organic coatings: a critical review10.1039/D1NR01899J ↗
10. Silica-based coating for corrosion protection of Electrogalvanized Steel10.1016/j.surfcoat.2004.07.126 ↗
11. The rheological performance of shear-thickening fluids based on carbon fiber and silica nanocomposite10.1063/5.0138294 ↗
12. Silica extraction from rice husk: comprehensive review and applications10.1016/j.hybadv.2023.100111 ↗
13. Production and characterization of silica materials from rice husk ash by different combustion processes10.1016/j.powtec.2024.119473 ↗
14. Biogenic silica nanoparticles from agro-waste: Properties, mechanism of extraction and applications in environmental sustainability10.1016/j.jece.2022.108550 ↗
15. Evaluation of corrosion protective behaviour of alumina film deposited by oxime-modified aluminium(iii) alkoxide precursor10.1016/j.surfcoat.2017.12.020 ↗
16. Corrosion and wear behavior of alumina coatings obtained by various methods10.1007/s11003-011-9328-2 ↗
17. Atomic layer deposition of nanometric alumina for corrosion protection of heterogeneous metallic surfaces – the case of aeronautical grade aluminium alloy 2024-T310.1016/j.corsci.2022.110773 ↗
18. Extraction and characterization of highly pure alumina (α, γ, and θ) polymorphs from waste beverage cans: a viable waste management approach10.1016/j.arabjc.2022.104518 ↗
19. Application of waste aluminum cans based nano alumina as reinforcing filler in natural rubber composites10.1007/s10163-022-01413-w ↗
20. Silica based organic–inorganic hybrid nanocomposite coatings for corrosion protection10.1016/j.porgcoat.2005.03.009 ↗
21. Fabrication and characterization of alumina-silica/poly(o-toluidine) nanocomposites as novel anticorrosive epoxy coatings films on Carbon Steel10.1016/j.microc.2020.105129 ↗
22. Corrosion behavior of silica-alumina refractories for scrap brass smelter linings10.1016/j.jclepro.2022.133600 ↗
23. High performance of supercapacitor based on alumina nanoparticles derived from Coca-Cola Cans10.1016/j.est.2023.107168 ↗
24. Low-calcination temperature to synthesize α-alumina from aluminium waste can using sol-gel method
25. Amorphous silica nanoparticles derived from biowaste via microwave combustion for drug delivery10.1111/ijac.13693 ↗
26. ASTM Standard G102-89 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, Annual Book of ASTM Standards, ASTM International, West Conshohocken, Vol. 3.02, 2006. https://doi.org/10.1520/G0102-89R15E01.10.1520/G0102-89R15E01 ↗
27. Synthesis of silica nanoparticles from Vietnamese rice husk by sol–gel method10.1186/1556-276X-8-58 ↗
28. Eco-friendly and facile synthesis of size-controlled spherical silica particles from rice husk10.1039/D1NA00668A ↗
29. Synthesis of biogenic silica nanoparticles from Rice husks for biomedical applications10.1016/j.ceramint.2014.08.069 ↗
30. AES and FTIR characterization of sol–gel alumina films10.1016/j.jnoncrysol.2012.03.017 ↗
31. Fabrication and characterization of alumina-silica/poly(o-toluidine) nanocomposites as novel anticorrosive epoxy coatings films on Carbon Steel10.1016/j.microc.2020.105129 ↗
32. Synthesis of silver-integrated silica nanostructures using rice hulls and their electrochemical performance for supercapacitor application
33. Mechanical milling: a superior nanotechnological tool for fabrication of nanocrystalline and nanocomposite materials10.3390/nano11102484 ↗
34. Nanocomposite coatings on steel for enhancing the Corrosion Resistance: a review10.1177/0021998319857807 ↗
35. Experimental and theoretical study on corrosion inhibition performance of environmentally benign non-ionic surfactants for mild steel in 3.5 % NaCl solution10.1016/j.psep.2018.01.001 ↗
36. Graphical analysis of electrochemical impedance spectroscopy data in Bode and Nyquist representations10.1016/j.jpowsour.2016.01.073 ↗
37. Electrochemical and corrosion studies of poly(nickel-tetraaminophthalocyanine) on Carbon Steel10.1016/j.electacta.2006.05.033 ↗
38. Inhibition of mild steel corrosion in hydrochloric acid solution by triazole derivatives10.1016/j.electacta.2007.08.021 ↗
39. Synergistic effect of silica/polypyrrole nanocomposites synthesized by hydrothermal method using rice husk as a silica source for corrosion protection10.1016/j.matchemphys.2023.128752 ↗
40. A review of impedance plot methods used for corrosion performance analysis of painted metals10.1016/0010-938X(86)90033-8 ↗
41. Microwave-assisted sol-gel synthesis of silica nanoparticles using rice husk as a precursor for corrosion protection application10.1007/s12633-022-02153-0 ↗
42. Synthesis of silica/hydroxyapatite nanocomposites using rice husk and fish scale for corrosion protection application10.1007/s12633-023-02469-5 ↗
43. Chitosan-polypyrrole-SiO2 composite coatings with advanced anticorrosive properties10.1016/j.synthmet.2014.12.019 ↗
44. Evaluation and correlation of self-healing functionalized silane-based hybrid nanocomposite materials as corrosion inhibitor10.1016/j.molliq.2023.122770 ↗
45. Evaluation of the influence of alumina nano-particle size and weight composition on the corrosion resistance of monolithic AA1070 aluminium
46. Effect of alumina coatings on corrosion protection of Steels in molten lead
47. Influence of alumina addition on steam corrosion behaviour of ytterbium disilicates for environmental barrier coating applications10.1016/j.corsci.2022.110555 ↗
48. Corrosion behavior of sol-gel coated amorphous alumina at different calcination temperatures10.1016/j.surfcoat.2020.126546 ↗
49. Formation of ceramic alumina nanocomposite coatings on aluminium for enhanced corrosion resistance10.1016/j.jmatprotec.2009.04.004 ↗
50. The effect of alumina-silica sols on electrodeposited zinc coatings for sintered NdFeB10.1016/j.jallcom.2017.06.123 ↗
51. Current research status of interface of ceramic-metal laminated composite material for armor protection
52. Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: Modeling and applications10.1016/j.actamat.2018.08.008 ↗
53. Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones10.1016/j.corsci.2019.108337 ↗