One-step in-situ synthesis of bimetallic-doped disordered carbons as anode for high-performance sodium-ion batteries
Source abstract
Abstract
Since sodium-ion batteries are considered to be the promising energy storage devices, carbon materials as the anodes have been intensively studied. They have good cycling stability, but their capacities are generally not high enough to meet the increasing demands. In order to solve this problem, a carbon-bimetallic composite is synthesized in one step using a simple pyrolysis method with low-cost biomass and cobalt ferrate as the precursors. This simple synthesis method allows the in-situ production of bi-alloys embedded into disordered carbon matrix derived from the tapioca starch to form high-performance anode material for sodium-ion batteries. The initial discharge capacity is 712 mA h g −1 at 0.05 A g −1and the initial Coulombic efficiency is 89.2%. Moreover, the introduction of bi-alloys not only facilitates the reaction kinetics, but also effectively mitigates the volume expansion and consequently promotes the cyclability. As a result, the half-cell sodium-ion battery delivers a capacity of more than 419 mA h g −1 at a high current of 10 A g −1, and after 200 cycles at a current density of 1 A g −1, its capacity degradation is only 0.2% per cycle with a Coulombic efficiency of about 100%. This high-performance materials with a low-cost preparation method could be great potential for commercialized applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Improving the electrochemistry performance of layer LiNi0.5Mn0.3Co0.2O2 material at 4.5 V cutoff potential using lithium metaborate10.1016/j.electacta.2017.05.075 ↗
2. Photoelectron spectroscopic study of Li oxides on Li over-deposited V2O5 thin film surfaces10.1016/j.apsusc.2004.12.023 ↗
3. How comparable are sodium-ion batteries to lithium-ion counterparts10.1021/acsenergylett.0c02181 ↗
4. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
5. Advances and challenges of sodium ion batteries as post lithium ion batteries10.1039/C5RA08321D ↗
6. Sodium-ion batteries: from academic research to practical commercialization10.1002/aenm.201701428 ↗
7. roadmap for sodium-ion batteries
8. An oxygen-blocking oriented multifunctional solid–electrolyte interphase as a protective layer for a lithium metal anode in lithium–oxygen batteries10.1039/D0EE02931A ↗
9. A chronicle review of nonsilicon (Sn, Sb, Ge)-based lithium/sodium-ion battery alloying anodes10.1002/smtd.202000218 ↗
10. Recent advances and prospects of cathode materials for sodium-ion batteries10.1002/adma.201501527 ↗
11. Recent advances in carbon anodes for sodium-ion batteries
12. The application of metal sulfides in sodium ion batteries10.1002/aenm.201601329 ↗
13. Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries10.1039/D0EE02997A ↗
14. Alloy anodes for sodium-ion batteries10.1007/s12598-020-01605-z ↗
15. Biomass-derived carbons for sodium-ion batteries and sodium-ion capacitors10.1002/cssc.201902685 ↗
16. Surface organic nitrogen-doping disordered biomass carbon materials with superior cycle stability in the sodium-ion batteries10.1016/j.jpowsour.2022.230994 ↗
17. Heteroatom-doped carbon materials: synthesis, mechanism, and application for sodium-ion batteries10.1002/smtd.201800323 ↗
18. S and P dual-doped carbon nanospheres as anode material for high rate performance sodium-ion batteries10.3390/app112412007 ↗
19. High-performance Na-ion storage of S-doped porous carbon derived from conjugated microporous polymers10.1007/s40820-019-0291-z ↗
20. Advances and challenges in metal sulfides/selenides for next-generation rechargeable sodium-ion batteries10.1002/adma.201700606 ↗
21. Transition metal oxide anodes for electrochemical energy storage in lithium-and sodium-ion batteries10.1002/9783527817252.ch4 ↗
22. Electrostatic Shielding Boosts Electrochemical Performance of Alloy-Type Anode Materials of Sodium-Ion Batteries
23. In-situ synthesis TiO2 nanosheets@ rGO for ultrafast sodium ion storage at both room and low temperatures10.1016/j.jallcom.2020.155413 ↗
24. Electrolyte boosting microdumbbell-structured alloy/metal oxide anode for fast-charging sodium-ion batteries10.1021/acsmaterialslett.2c00841 ↗
25. Metallic Sn-based anode materials: application in high-performance lithium-ion and sodium-ion batteries10.1002/advs.201700298 ↗
26. Hard-Carbon Negative Electrodes from Biomasses for Sodium-Ion Batteries10.3390/molecules28104027 ↗
27. Vanadium-modified hard carbon spheres with sufficient pseudographitic domains as high-performance anode for sodium-ion batteries10.1002/cey2.191 ↗
28. A carbon-based material with a hierarchical structure and intrinsic heteroatom sites for sodium-ion storage with ultrahigh rate and capacity10.1039/D1NR04457E ↗
29. H. Electronic modulation induced by decorating single-atomic Fe-Co pairs with Fe-Co alloy clusters toward enhanced ORR/OER activity10.1016/j.apcatb.2023.123231 ↗
30. Materials design for high-safety sodium-ion battery10.1002/aenm.202000974 ↗
31. Intrinsic Defects and Their Role in the Phase Transition of Na-Ion Anode Na2Ti3O710.1021/acsaem.2c03466 ↗
32. MOFs-derived core-shell Co3Fe7@ Fe2N nanopaticles supported on rGO as high-performance bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions
33. A High-Performance Alloy-Based Anode Enabled by Surface and Interface Engineering for Wide-Temperature Sodium-Ion Batteries10.1002/aenm.202300351 ↗
34. Electrochemical performance of different high-entropy cathode materials for Na-ion batteries10.1016/j.jallcom.2023.172316 ↗
35. SnSb alloy blended with hard carbon as anode for Na-ion batteries10.3390/en11061614 ↗
36. Electrochemically Alternating Voltage Induction and In-Situ Preparation of Tin-Based Multiphase Structures Anode for Sodium-Ion Batteries