journal article·2024-06

Effective incorporation of cobalt near surface region for cobalt-free cathodes in lithium-ion batteries

Hyerin Shin, Jimin Park, Wonchang Choi

Publisher page

Abstract

Cobalt-free cathode materials, particularly Ni-rich layered oxide cathode materials, are ideal for electric vehicle Li-ion batteries, offering high energy density and cost-effectiveness. However, high Ni content in high-temperature synthesis leads to issues like increased Li/Ni cation mixing and reduced rate capability, mainly due to the absence of Co. Therefore, this study investigated the utilization of a small amount of Co instead of completely removing it to enhance electrochemical performance. A simple pre-calcination process was used to induce Co substitution beneath the Ni-rich layered oxide cathode materials surface. A coating process was also performed for comparison. The Li/Ni cation mixing in the Co-substituted sample during high-temperature calcination was 2.43%, demonstrating a superior value compared to the Co-coating process. Rate capability tests showed superior performance for Co-substituted sample (164.2 mAh g −1) at 2 C compared to coated sample (151.0 mAh g −1 ). Moreover, Co substitution improved not only the cycle stability but also the high-temperature stability at an elevated state of charge. This study focuses on the surface modification of cobalt-free cathode, providing direct insight into the effects of Co substitution and typical Co coating and suggests an optimal process that uses small amounts of Co.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Charge matters in fish, Nature Nanotechnology. https://doi.org/10.1038/nnano.2010.207. 2010.10.1038/nnano.2010.207 ↗
2. Recycling end-of-life electric vehicle lithium-ion batteries10.1016/j.joule.2019.09.014 ↗
3. Energy and environmental aspects in recycling lithium-ion batteries: concept of battery identity global passport10.1016/j.mattod.2020.09.001 ↗
4. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
5. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
6. 30 Years of Lithium-ion batteries
7. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
8. Opportunities and challenges of lithium ion batteries in automotive applications10.1021/acsenergylett.0c02584 ↗
9. Next-Generation cobalt-free cathodes – a prospective solution to the battery industry's cobalt problem10.1002/aenm.202103050 ↗
10. High nickel and no cobalt horizontal line the pursuit of next-generation layered oxide cathodes
11. Structural and electrochemical properties of LiMoO210.1016/j.jpowsour.2011.11.061 ↗
12. Recent progress and perspective of advanced high-energy co-less Ni-rich cathodes for Li-ion batteries: yesterday, today, and tomorrow10.1002/aenm.202002027 ↗
13. Cobalt-free, high-nickel layered oxide cathodes for lithium-ion batteries: progress, challenges, and perspectives10.1016/j.ensm.2020.09.020 ↗
14. A. Mesnier, A.J.A.A.M. Manthiram, 2020, Interfaces, Synthesis of LiNiO2 at moderate oxygen pressure and long-term cyclability in lithium-ion full cells, 12(47) 52826-52835..10.1021/acsami.0c16648 ↗
15. Role of Superexchange Interaction on Tuning of Ni/Li Disordering in Layered Li(Ni(x)Mn(y)Co(z))O(2)10.1021/acs.jpclett.7b02498 ↗
16. M. Bianchini, F. Fauth, P. Hartmann, T. Brezesinski, J.J.JomC.A. Janek, 2020, An in situ structural study on the synthesis and decomposition of LiNiO 2, 8(4) 1808-1820..10.1039/C9TA12073D ↗
17. M. Bianchini, M. Roca-Ayats, P. Hartmann, T. Brezesinski, J.J.A.C.I.E. Janek, 2019, There and back again—the journey of LiNiO2 as a cathode active material, 58(31) 10434-10458..10.1002/anie.201812472 ↗
18. Control of electrochemical properties of nickel-rich layered cathode materials for lithium ion batteries by variation of the manganese to cobalt ratio10.1016/j.jpowsour.2014.11.075 ↗
19. Identical cut-off voltage versus equivalent capacity: an objective evaluation of the impact of dopants in layered oxide cathodes10.1039/D1TA01408K ↗
20. Improved Co-substituted, LiNi0.5−Co2Mn1.5−O4 lithium ion battery cathode materials10.1016/j.jpowsour.2012.07.104 ↗
21. Identifying and addressing critical challenges of high-voltage layered ternary oxide cathode materials10.1021/acs.chemmater.9b01557 ↗
22. Understanding the failure mechanism towards developing high-voltage single-crystal Ni-rich Co-free cathodes10.1016/j.gee.2022.11.006 ↗
23. Dopant distribution in co-free high-energy layered cathode materials10.1021/acs.chemmater.9b03603 ↗
24. Intrinsic role of cationic substitution in tuning Li/Ni mixing in high-Ni layered oxides10.1021/acs.chemmater.8b04673 ↗
25. Ionic conductive interface boosting high performance LiNi0.8Co0.1Mn0.1O2 for lithium ion batteries10.1021/acsaem.9b02008 ↗
26. Synthesis of Ni-rich layered-oxide nanomaterials with enhanced li-ion diffusion pathways as high-rate cathodes for li-ion batteries10.1021/acsaem.0c00765 ↗
27. A robust carbon coating strategy toward Ni-rich lithium cathodes10.1016/j.ceramint.2020.05.160 ↗
28. Transition-metal redox evolution in LiNi0.5Mn0.3Co0.2O2 electrodes at high potentials10.1016/j.jpowsour.2017.06.009 ↗
29. Implications of cation-disordered grain boundaries on the electrochemical performance of the LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries10.1039/C8TA04731F ↗
30. I. Saadoune, C. Delmas, 1996, LiNil -yCoy02p ositive electrode materials: rela tionships bet ween the structure, physical properties and electrochemical behaviour, 6(2) 193-199..10.1039/JM9960600193 ↗
31. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries10.1002/adfm.201808825 ↗
32. Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries10.1038/s41560-022-01106-6 ↗
33. Cobalt-free nickel-rich cathode materials based on Al/Mg co-doping of LiNiO(2) for lithium ion battery10.1016/j.jcis.2023.01.134 ↗
34. Lithium iron aluminum nickelate, LiNi(x) Fe(y) Al(z) O(2) -new sustainable cathodes for next-generation cobalt-free li-ion batteries10.1002/adma.202002960 ↗
35. Al, Zr dual-doped cobalt-free nickel-rich cathode materials for lithium-ion batteries10.1016/j.pnsc.2022.12.004 ↗
36. Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping10.1016/j.ensm.2020.07.035 ↗
37. Investigating the effects of magnesium doping in various Ni-rich positive electrode materials for lithium ion batteries10.1149/2.1101915jes ↗
38. Review—surface coatings for cathodes in lithium ion batteries: from crystal structures to electrochemical performance10.1149/1945-7111/ac60f3 ↗
39. Electrostatic interaction-driven inorganic coating layer toward improving battery performance for 5 V class high-voltage cathode in secondary batteries10.1016/j.cej.2022.139737 ↗
40. Polydopamine-induced nano-coating layer for high stability of nickel-rich cathode in secondary batteries10.1002/er.8227 ↗
41. Polydopamine-assisted coating layer of a fast Li-ion conductor Li6.25La3Zr2Al0.25O12 on Ni-rich cathodes for Li-ion batteries10.1016/j.cej.2022.137939 ↗
42. Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries10.1038/s41467-021-24893-0 ↗
43. Ti-gradient doping to stabilize layered surface structure for high performance high-Ni oxide cathode of li-ion battery10.1002/aenm.201901756 ↗
44. Surface engineering and trace cobalt doping suppress overall Li/Ni mixing of Li-rich Mn-based cathode materials10.1021/acsami.1c21182 ↗
45. Surface modification of boron cobalt complexes to enhance cycling performance of cobalt-free Li-rich cathode materials10.1016/j.jallcom.2023.170595 ↗
46. A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries10.1039/C8EE00155C ↗
47. Y.P. Wu, E. Rahm, R. Holze, 2002, Effects of heteroatoms on electrochemical performance of electrode materials for lithium ion batteries, 47 3491-3507..10.1016/S0013-4686(02)00317-1 ↗
48. Stabilizing effect of a hybrid surface coating on a Ni-Rich NCM cathode material in all-solid-state batteries10.1021/acs.chemmater.9b02947 ↗
49. Recent advances in Ni-rich layered oxide particle materials for lithium-ion batteries10.1016/j.partic.2020.09.004 ↗
50. Unveiling the potential of surface–beneath region doping by induced-diffusion in nickel-rich single crystal cathode for high-performance lithium-ion batteries10.1016/j.cej.2023.144885 ↗
51. Hexagonal plate-like Ni–Co–Mn hydroxide nanostructures to achieve high energy density of hybrid supercapacitors10.1039/C9TA02583A ↗
52. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles10.1021/acs.nanolett.5b00045 ↗
53. Enhanced electrochemical performance and structural stability at high Cut-off voltage of monocrystalline LiNi0.65Co0.07Mn0.28O2 cathode material via Nano-sized Co(OH)2 coating10.1016/j.apsusc.2022.152794 ↗
54. Rational design of coating ions via advantageous surface reconstruction in high-nickel layered oxide cathodes for lithium-ion batteries10.1002/aenm.202101112 ↗
55. Single-crystal Ni-rich layered LiNi0.9Mn0.1O2 enables superior performance of co-free cathodes for lithium-ion batteries10.1021/acssuschemeng.1c06704 ↗
56. Structure, morphology and electrochemical properties of LiNi0.5Mn0.5−Co O2 prepared by solid state reaction10.1016/j.jpowsour.2005.02.006 ↗
57. Comprehensive understanding of Li/Ni intermixing in layered transition metal oxides10.1016/j.mattod.2021.09.013 ↗
58. Exposing the 010 planes by oriented self-assembly with nanosheets to improve the electrochemical performances of Ni-Rich Li[Ni(0.8)Co(0.1)Mn(0.1)]O(2) microspheres10.1021/acsami.7b18933 ↗
59. Realization of a high-voltage and high-rate nickel-rich NCM cathode material for LIBs by Co and Ti dual modification10.1021/acsami.1c03195 ↗
60. Influence of cationic substitutions on the oxygen loss and reversible capacity of lithium-rich layered oxide cathodes10.1021/jp200375d ↗
61. Stable Ni-rich layered oxide cathode for sulfide-based all-solid-state lithium battery10.1016/j.esci.2022.06.001 ↗
62. Facile surface improvement method for LaCoO3 for toluene oxidation10.1039/C8CY00765A ↗
63. Multifunctionality of cerium decoration in enhancing the cycling stability and rate capability of a nickel-rich layered oxide cathode10.1039/D1NR05912B ↗
64. XPS on Li-battery-related compounds: analysis of inorganic SEI phases and a methodology for charge correction10.1021/acsaem.8b00406 ↗
65. Impact of residual lithium on the adoption of high-nickel layered oxide cathodes for lithium-ion batteries10.1021/acs.chemmater.0c02808 ↗
66. Modified high-nickel cathodes with stable surface chemistry against ambient air for lithium-ion batteries10.1002/anie.201801533 ↗
67. J. Eom, aM.G. Kim, J. Choa, 2008, Storage Characteristics of LiNi0.8Co0.1+xMn0.1−xO2 (x = 0, 0.03, and 0.06) Cathode Materials for Lithium Batteries, 155(3) A239-A245. https://doi.org/10.1149/1.2830946兴..10.1149/1.2830946 ↗
68. Anionic redox reaction and structural evolution of Ni-rich layered oxide cathode material
69. Semiconductor electrochemistry for clean energy conversion and storage10.1007/s41918-021-00112-8 ↗
70. Tuning cobalt-free nickel-rich layered LiNi0.9Mn0.1O2 cathode material for lithium-ion batteries10.1002/celc.202000443 ↗
71. Modification of LiNi0.8Co0.1Mn0.1O2 cathode materials from the perspective of chemical stabilization and kinetic hindrance10.1016/j.jpowsour.2021.229756 ↗
72. Bulk Mg-doping and surface polypyrrole-coating enable high-rate and long-life for Ni-rich layered cathodes10.1016/j.cej.2021.128625 ↗
73. Surface engineering of LiNi0.8Mn0.1Co0.1O2 towards boosting lithium storage: bimetallic oxides versus monometallic oxides10.1016/j.nanoen.2020.105034 ↗
74. Structural and electrochemical properties of low-cobalt-content LiNi(0.6+x)Co(0.2-x)Mn(0.2)O(2) (0.0 </= x </= 0.1) cathodes for lithium-ion batteries10.1021/acsami.0c06824 ↗
75. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
76. Enhanced electrochemical performances of cobalt-doped Li(2)MoO(3) cathode
77. Enhance electrochemical performance of LiFePO4 cathode material by Al-doped Li7La3Zr2O12 and carbon co-coating surface modification10.1016/j.jallcom.2020.154915 ↗
78. Electrochemical impedance study on the low temperature of Li-ion batteries10.1016/j.electacta.2003.10.016 ↗
79. Surface modification of poly(vinylidene fluoride) by alkaline treatment 1
80. Improved electrochemical performances of LiNi0.6Co0.2Mn0.2O2 cathode material by reducing lithium residues with the coating of Prussian blue10.1016/j.jallcom.2018.09.286 ↗
81. Constructing a stable interfacial phase on single-crystalline Ni-rich cathode via chemical reaction with phosphomolybdic acid10.1016/j.nanoen.2021.106172 ↗
82. E.W.F.J.R. Dahn, Uy.S.M. Obrovac, Thermal stability of LixCoO2, LixNiO2 and 2-MnO2 and consequences for the safety of Li-ion cells (1994).
83. Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries10.1021/am403684z ↗
84. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
85. Combining in situ synchrotron X-ray diffraction and absorption techniques with transmission electron microscopy to study the origin of thermal instability in overcharged cathode materials for lithium-ion batteries10.1002/adfm.201200693 ↗
86. Structural changes and thermal stability of charged LiNixMnyCozO(2) cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗