Influence of initial heat treatment on microstructure evolution and mechanical properties during cold rolling and annealing of Hastelloy X
Source abstract
Abstract
In order to study the influence of initial heat treatment on the microstructure and properties of Hastelloy X alloy in the subsequent cold rolling and annealing process, and to provide a research basis for the reasonable selection of parameters (temperature and time) in actual industrial production, specimens with three different initial heat treatment states (1040 °C/30 min, 1180 °C/5 min and 1180 °C/30 min) were selected and these specimens were cold rolled with a reduction of 50% and annealed at 1080 °C. The grain structure and carbides in the alloy were analyzed using a method combined with microscopic observation and quantitative statistics. A series of room temperature tensile and hardness tests were performed on the annealed alloys. The study found that the fundamental factor affecting the microstructure and properties of Hastelloy X alloy is carbides. The size, volume fraction and distribution of carbides directly affect the grain structure and mechanical properties. By choosing a lower initial heat treatment temperature (1040 °C) and a shorter time (5 min), the uniformity of grain size and carbide distribution in the annealed microstructure can be effectively improved. However, it should be noted that lowering the heat treatment temperature will also result in larger carbide size (0.275 µm) and lower yield strength (400 MPa). In addition, this work also studied the effect of annealing time and found that it has the same effect as the initial heat treatment time.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Davis · 2000 · 53
2. J.H. Spendelow, C. Walter, Nickel-base alloy for high temperature service, US2703277A, {C}1955–03-01{C}.
3. L.M. Pike, 100+ years of wrought alloy development at Haynes international, 8th International Symposium on Superalloy 718 and Derivatives, The Minerals, Metals & Materials Society. 2014. https://doi.org/10.1002/9781119016854.ch2.10.1002/9781119016854.ch2 ↗
4. D.R. Sporer, L.T. Shiembob, Alloy Selection for Honeycomb Gas Path Seal Systems, Proceedings of the ASME Turbo Expo 2004: Power for Land, Sea, and Air, Vienna, Austria. 2004, pp. 763–774. https://doi.org/10.1115/GT2004–53115.10.1115/GT2004-53115 ↗
5. Study on grain boundary distribution and formation mechanism in GH3536 superalloy strip and foil after annealing treatment10.1016/j.matchar.2022.112236 ↗
6. ASM Handbook: Volume 4, Heat Treating, ASM International, Materials Park, OH, USA, 1991.
7. Precipitation behavior of Ni-Cr-22 Fe-18 Mo (Hastelloy-X) and Ni-Cr-22 Co-12 Mo (Inconel-617) after isothermal aging10.13182/NT84-A33462 ↗
8. Phase precipitation and time-temperature-transformation diagram of Hastelloy X10.1016/S0921-5093(00)01049-2 ↗
9. Effects of annealing on microstructures and properties of cold-rolled GH3536 sheet10.1016/j.matchar.2021.111409 ↗
10. Texture evolution and twinnability prediction of the most compliant orientation in GH3536 superalloy during cold rolling10.1016/j.jmrt.2023.03.188 ↗
11. Mechanical properties and deformation texture of GH536 superalloy strip10.4028/www.scientific.net/MSF.747-748.489 ↗
12. Strain-annealed” grain boundary engineering process investigated in Hastelloy-X10.1016/j.mtla.2019.100544 ↗
13. Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X10.1016/j.jmps.2012.02.001 ↗
14. Recrystallization and grain growth behavior for strip and foil of Ni-based superalloy GH3536
15. Effects of solution treatment on microstructure and mechanical properties of GH536 foil, hot working
16. H. Yu, X. Li, H. Jiang, Z. Yao, J. Dong, Effect of Carbide Characteristics on Damage of Cold Deformed GH3536 Alloy and Its Control, Acta Metallurgica Sinica. https://doi.org/10.11900/0412.1961.2022.00094.
17. Haynes International, Heat Treatment. 〈https://www.haynesintl.com/alloys/fabrication-brochure/heat-treatment〉, 2024 (accessed 6 Jan 2024).
18. H. Chandler, Heat Treater’s Guide: Practices and Procedures for Nonferrous Alloys, ASM International, Materials Park, OH 44073–0002, USA, 1996, pp. 38–39.
19. D.R. Sporer, L.T. Shiembob, Alloy Selection for Honeycomb Gas Path Seal Systems, Proceedings of the ASME Turbo Expo 2004.Vienna, Austria. June 14–17, (2004)763–774. https://doi.org/10.1115/GT2004–53115.10.1115/GT2004-53115 ↗
20. C.H. Lund, Oxidation of nickel-and cobalt-base superalloys, Defense Metals Information Center, Battelle Memorial Institute, 1965.10.21236/AD0614707 ↗
21. B. Beausir, J.J. Fundenberger, Analysis Tools for Electron and X-ray diffraction, ATEX-Software, 〈www.Atex-Software〉, Eu, Université de Lorraine-Metz, France, 2017.
22. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
23. Tommy, K.D.Epy. 〈https://github.com/tommyod/KDEpy〉, 2024 (accessed 6 Jan 2024).
24. A.S.T.M. E140–12b, Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness. ASTM International, West Conshohocken, PA, 2019.
25. The development of spatial correlations during Ostwald ripening: a test of theory10.1016/S1359-6454(00)00036-7 ↗
26. The precipitation behavior and its effect on mechanical properties of cold-rolled super-ferritic stainless steels during high-temperature annealing10.1016/j.jmrt.2021.03.058 ↗
27. On the Zener drag10.1016/0001-6160(85)90214-7 ↗
28. J. Humphreys, G.S. Rohrer, A. Rollett, Recrystallization and Related Annealing Phenomena (Third Edition), Elsevier, 2017, pp. 135–409. https://doi.org/10.1016/B978–0-08–098235-9.00004–5.10.1016/B978-0-08-098235-9.00012-4 ↗
29. Effect of second phase particles and stringers on microstructures after rolling and recrystallization10.1016/j.msea.2018.08.040 ↗
30. Dynamics of particle-assisted abnormal grain growth revealed through integrated three-dimensional microanalysis10.1016/j.actamat.2020.04.049 ↗
31. Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy
32. X. Tian, T. Gu, H. Hou, Y. Guo, F. Xu and Y. Zhao, Cooperative Effect of Strength and Ductility Processed by Thermomechanical Treatment for Cu-Al-Ni Alloy. http://dx.doi.org/10.2139/ssrn.4084723.10.2139/ssrn.4084723 ↗