High-temperature oxidation behavior of laser additively manufactured AlCrCoNiSi-based high-entropy alloys at 1100 ℃
Source abstract
Abstract
High-temperature oxidation behavior of two laser additively manufactured AlCrCoNiSi-based high-entropy alloys (Al10 and Al15) are systematically studied in this work. These two alloys exhibit similar oxidation behaviors involving initial linear kinetics oxidation and subsequent parabolic kinetics oxidation at 1100 ℃. However, Al10 alloy has a superior oxidation resistance than Al15 alloy according to the oxidation rate constant. α-Al 2O 3 is the predominant phase of the oxide scales grown on both alloys. Cross-sectional views of the scales show that the scales consist of surface equiaxed grains and underlying columnar grains. For all oxidized alloys, a newly-formed fcc layer forms in the subsurface Al-depletion zone due to the preferential oxidation of aluminum. Al10 alloy exhibits a much thicker newly-formed fcc layer than Al15 alloy after the same oxidation time. This work ascribes the superior oxidation resistance of Al10 alloy to its thick newly-formed fcc layer, which suppresses the outward Al diffusion from the substrate to scale-metal interface by increasing the diffusion distance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Assessment of CrFeCoNi and AlCrFeCoNi high-entropy alloys as bond coats for thermal barrier coatings10.1007/s11666-022-01388-y ↗
2. Oxidation behavior of AlCoCrFeNiSix high entropy alloy bond coatings prepared by atmospheric plasma spray10.1016/j.surfcoat.2023.129489 ↗
3. Oxidation resistant FeCoNiCrAl high entropy alloy/AlSi12 composite coatings with excellent adhesion on Ti-6Al-4 V alloy substrate via mechanical alloying and subsequent laser cladding10.1016/j.surfcoat.2023.129577 ↗
4. Impressive high-temperature oxidation resistance of FeCrNiMnAl high entropy alloy coating on the ferritic/martensitic steel with primordial Al2O3 and Mn3O4 gradient films10.1016/j.jallcom.2022.167109 ↗
5. Recent progress in oxidation behavior of high-entropy alloys: a review10.1063/5.0116605 ↗
6. Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100℃10.1016/j.corsci.2022.110930 ↗
7. Effect of Y on the high-temperature oxidation behavior of CrMoTaTi refractory high entropy alloy10.1016/j.ijrmhm.2021.105755 ↗
8. Role of the rare-earth elements effect in transforming the oxidation behavior of AlxCoCrFeNi high entropy alloys10.1016/j.corsci.2023.111412 ↗
9. Improving the high temperature oxidation resistance of high entropy alloy by surface modification10.1515/corrrev-2022-0011 ↗
10. High oxidation resistance of AlCoCrFeNi high entropy alloy through severe shear deformation processing10.1016/j.jallcom.2022.165385 ↗
11. Effect of Al on oxidation behavior of AlxCrCuFeNi2 (x= 0.2, 0.4, 0.6) high entropy alloys
12. Effect of Al content on the microstructure, properties, and oxidation behaviors at 900 ℃ of (MoNbCoCrAlxSi0.2)70Ti30 refractory high-entropy alloys coatings fabricated by electron beam cladding10.1016/j.corsci.2023.111481 ↗
13. The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy10.1016/j.matchar.2022.111921 ↗
14. Performance assessments of porous FeCoNiCrAlx high-entropy alloys in high-temperature oxidation, carbonization and sulfidation atmospheres10.1016/j.jallcom.2022.167437 ↗
15. Improving high-temperature oxidation behavior by modifying Al and Co content in Al-Co-Cr-Fe-Ni high-entropy alloy10.1016/j.jmst.2022.04.028 ↗
16. Role of Al and Cr on cyclic oxidation behavior of AlCoCrFeNi2 high entropy alloy10.1016/j.jallcom.2022.165820 ↗
17. Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 100010.1016/j.corsci.2022.110504 ↗
18. Tailoring high-temperature oxidation resistance of FeCrMnVSix high entropy alloy coatings via building Si-rich dendrite microstructure10.1016/j.apsusc.2022.154862 ↗
19. Microstructure and oxidation behavior of CoCrxCuFeMnNi high-entropy alloys fabricated by vacuum hot-pressing sintering10.1016/j.micron.2022.103291 ↗
20. Role of Cr in the high-temperature oxidation behavior of CrxMnFeNi high-entropy alloys at 800 ℃ in air10.1016/j.corsci.2022.110211 ↗
21. Laser-based directed energy deposition (DED-LB) of advanced materials10.1016/j.msea.2022.142967 ↗
22. Additive manufactured high entropy alloys: A review of the microstructure and properties10.1016/j.matdes.2022.110875 ↗
23. An overview of the process mechanisms in the laser powder directed energy deposition10.3390/app13010117 ↗
24. High temperature oxidation study of direct laser deposited AlXCoCrFeNi (X=0.3,0.7) high entropy alloys10.1016/j.surfcoat.2019.125028 ↗
25. Laser additive manufacturing of CrMnFeCoNi high entropy alloy: microstructural evolution, high temperature oxidation behavior and mechanism10.1016/j.optlastec.2020.106326 ↗
26. Ultra-high temperature oxidation resistant refractory high entropy alloys fabricated by laser melting deposition: Al concentration regulation and oxidation mechanism10.1016/j.corsci.2023.111537 ↗
27. High-temperature oxidation behaviour of high chromium superalloys additively manufactured by conventional or extreme high-speed laser metal deposition10.1016/j.corsci.2020.108922 ↗
28. High temperature oxidation enhanced by laser remelted of CoCrFeNiAlx(x = 0.1, 0.5 and 1) high-entropy alloys10.1016/j.jallcom.2022.165297 ↗
29. Enhancing the strength of AlCrFeNi HEAs via tailoring aluminum content and optimal aging treatment10.1016/j.jallcom.2021.162242 ↗
30. Effect of Al addition on the corrosion behavior of AlxCoCrFeNi high entropy alloys in supercritical water10.1016/j.corsci.2023.111089 ↗
31. Enhancing bending fatigue resistance of the CoCrFeMnNi high-entropy alloy thin foils by Al addition10.1016/j.msea.2021.142281 ↗
32. The influence of columnar to equiaxed transition on deformation behavior of FeCoCrNiMn high entropy alloy fabricated by laser-based directed energy deposition
33. TGO and Al diffusion behavior of CuAlxNiCrFe high-entropy alloys fabricated by high-speed laser cladding for TBC bond coats10.1016/j.corsci.2021.109781 ↗
34. The as-cast AlxCrTaTi refractory medium entropy alloys with good room-temperature mechanical properties and high-temperature oxidation resistance10.1016/j.jallcom.2022.167675 ↗
35. High temperature oxidation resistance of arc ion plating NiCoCrAlY coating modified via laser shock peening10.1016/j.jallcom.2022.164708 ↗
36. Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system10.1088/1468-6996/16/5/055001 ↗
37. Effect of sigma phase on thermophysical properties of Fe55Cr45 alloy10.1016/j.intermet.2019.106552 ↗
38. Thermal expansion of MCrAlY alloys10.1016/j.surfcoat.2003.05.001 ↗
39. Comparison of thermal expansion and oxidation behavior of various high-temperature coating materials and superalloys10.1179/mht.2004.012 ↗
40. ISO 14577–1:2015, Metallic materials-Instrumented indentation test for hardness materials parameters-Part 1: test method, ISO, Genève, 2015.
41. Effect of Al content on the microstructure and properties of CoCrCuFeNiMoAlx high entropy alloy
42. Aluminum alloys with high elastic modulus10.1016/j.matlet.2022.132292 ↗
43. J.C. Pereira, J. Zambrano, A. Yañez, V. Amigó, Laser Cladding of MCrAlY Alloys, in: Pasquale Cavaliere (Eds.), Laser Cladding of Metals, Springer, Cham, 202, pp. 363–394, https://doi.org/10.1007/978–3-030–53195-9_13.10.1007/978-3-030-53195-9_13 ↗
44. D.J. Young, Chapter 1-The Nature of High Temperature Oxidation, in: D.J. Young (Eds.), High Temperature Oxidation and Corrosion of Metals (Second Edition), Elsevier, pp. 1–30, https://doi.org/10.1016/B978–0-08–100101-1.00001–7.10.1016/S1875-9491(08)00001-X ↗
45. Effect of Al and Cr on the oxidation behavior of nanocrystalline coatings at 1050 ℃10.1016/j.corsci.2022.110191 ↗
46. Microstructures and high-temperature oxidation behavior of laser cladded NiCoCrAlYSi coating on Inconel 625 Ni-based superalloy modified via high current pulsed Electron beam10.1016/j.surfcoat.2021.127796 ↗
47. Effect of microstructure on early oxidation of MCrAlY coatings10.1016/j.actamat.2018.08.018 ↗
48. High temperature oxidation behavior and mechanism of Al0.3CuCrFeNi2 high-entropy alloy with a coherent γ/γ’ microstructure10.1016/j.corsci.2021.109984 ↗
49. Effect of heat treatment on the oxidation behavior of an AlCoCrFeNi2 near-eutectic high entropy alloy10.1016/j.corsci.2023.111298 ↗
50. Effects of laser shock processing on θ-Al2O3 to α-Al2O3 transformation and oxide scale morphology evolution in (γ’+ β) two-phase Ni-34Al-0.1Dy alloys10.1016/j.jmst.2021.09.028 ↗
51. Preparation and self-healing performance of spherical α-Al2O3@MoSi2 particles using the precipitation method10.1016/j.ceramint.2022.09.318 ↗
52. Comparative study on the initial oxidation behavior of conventional and nanocrystalline MCrAlY coatings-effect of microstructure evolution and dynamic mechanisms10.1016/j.actamat.2022.118264 ↗
53. Effect of the θ-Al2O3 Transformation on the Oxidation Behavior of β-NiAl+Zr10.1007/BF00846690 ↗
54. Effect of Al2O3 scales from pre-oxidation on the microstructural evolution and phase transition of NiAlHf coatings at 1200 ℃10.1016/j.surfcoat.2022.128119 ↗
55. The oxidation behavior of Ni2FeCoCrAlx high-entropy alloys in dry air10.1016/j.jallcom.2020.155518 ↗
56. Textures of alumina scales on FeCrAl alloys10.1016/S1359-6462(03)00403-2 ↗
57. High temperature oxidation behavior of atmosphere plasma sprayed AlCoCrFeNi high-entropy alloy coatings10.1016/j.matchemphys.2022.125939 ↗