journal article·2024-01

Nanoscale nucleation and growth of MgAl2O4 inclusion in Al-Mg deoxidized steel

Yuanyou Xiao, Lei Cao, Guocheng Wang, Hong Lei, Zhuo Zhao, Yi Ren

Publisher page

Abstract

The 2D and 3D morphology of single and multi particle MgAl 2O 4 inclusion in the Al-Mg deoxidized steel were observed in the present experiment. Then, a thermodynamic model of nano-MgAl 2O 4 was developed to investigate the mechanism of the nucleation and growth of MgAl 2O 4 inclusions at nanoscale in steel. The thermodynamic properties and interface energy between nano-MgAl 2O 4 and molten steel were obtained in this work. The results show that the interface energy of MgAl 2O 4 in molten steel increased sharply with the increasing size of MgAl 2O 4 when r < 10 nm while increased slowly with the increasing size of MgAl 2O 4 when r > 10 nm. The supersaturation ratio of reactant elements increased with the decreasing of temperature due to the decreasing of equilibrium concentration product and the increasing of elements segregation in steel, and also increased with the increasing of size under a fixed value of concentration product of reactant elements. As a results, the values of Δ G for the nucleation and growth of MgAl 2O 4 inclusions in steel decreased with the increasing of supersaturation ratio of reactants and the decreasing of temperature. The critical radius r c of MgAl 2O 4 inclusions decreased with the experiment process and the finally value of r c in present experiment is 2.2 nm.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Ultra-long cycle fatigue of high-strength carbon steels part I: review and analysis of the mechanism of failure10.1016/S0921-5093(03)00135-7 ↗
2. Ultra-long cycle fatigue of high-strength carbon steels part II: estimation of fatigue limit for failure from internal inclusions10.1016/S0921-5093(03)00136-9 ↗
3. Inclusions and nozzle clogging during the billet continuous casting process
4. Formation and modification of MgO·Al2O3-Based inclusions in alloy steels10.1007/s11663-012-9663-1 ↗
5. Modification of MgO·Al2O3 spinel inclusions in Al-killed steel by Ca-treatment10.1007/s12613-011-0394-0 ↗
6. Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C-Mn steel10.1016/S1359-6454(02)00560-8 ↗
7. Formation of fine intragranular ferrite in cast plain carbon steel inoculated by titanium oxide nanopowder10.1016/j.scriptamat.2007.07.016 ↗
8. Intragranular ferrite formation mechanism and mechanical properties of non‐quenched‐and‐tempered medium carbon steels10.1002/srin.200806143 ↗
9. Ferrite nucleation potency of non-metallic inclusions in medium carbon steels10.1016/S1359-6454(01)00134-3 ↗
10. Micro-structure refinement in low carbon high manganese steels through Ti-deoxidation, characterization and effect of secondary deoxidation particles10.2355/isijinternational.51.2019 ↗
11. Kinetics of transformation of Al2O3 to MgO·Al2O3 spinel inclusions in Mg-containing steel10.1007/s11663-017-1122-6 ↗
12. Effect of slag composition on the kinetics of formation of Al2O3-MgO inclusions in aluminum killed ferritic stainless steel10.2355/isijinternational.40.121 ↗
13. Dissolution behavior of Mg from MgO into molten Steel deoxidized by Al10.2355/isijinternational.54.2230 ↗
14. Dissolution behavior of Mg from MgO-C refractory in Al-killed molten steel10.2355/isijinternational.ISIJINT-2017-593 ↗
15. Formation of MgO·Al2O3 inclusions in high strength alloyed structural steel refined by CaO-SiO2-Al2O3-MgO slag10.2355/isijinternational.48.885 ↗
16. Characteristics of particle size distribution of deoxidation products with Mg, Zr, Al, Ca, Si/Mn and Mg/Al in Fe-10mass%Ni alloy10.2355/isijinternational.46.14 ↗
17. Learning about the nucleation pathway of MgO·Al2O3 spinel from an Fe-O-Al-Mg melt using a two-step nucleation mechanism10.1039/C5RA03611A ↗
18. Formation pathways for MgO·Al2O3 inclusions in iron melt10.1016/j.jallcom.2019.152243 ↗
19. Kinetics of Transformation of Al2O3 to MgO·Al2O3 Spinel inclusions in Mg-containing steel10.1007/s11663-017-1122-6 ↗
20. Effect of slag composition on the kinetics of formation of Al2O3-MgO inclusions in aluminum killed ferritic stainless steel10.2355/isijinternational.40.121 ↗
21. MgAl2O4 inclusion agglomeration on the surface of liquid steel10.1007/s11663-019-01688-9 ↗
22. Thermodynamics and agglomeration behavior on spinel inclusion in Al-deoxidized steel coupling with Mg treatment10.3390/met9080900 ↗
23. Metastable phases in interface controlled materials10.1080/001075100181204 ↗
25. Grain boundaries in nanophase palladium: high resolution electron microscopy and image simulation10.1016/0956-716X(90)90592-5 ↗
26. Size effect on the Fe nanocrystalline phase transformation10.1016/S1359-6454(02)00284-7 ↗
27. X-ray diffraction studies of the structure of nanometer-sized crystalline materials10.1103/PhysRevB.35.9085 ↗
28. Positron-lifetime study of polycrystalline Ni-P alloys with ultrafine grains10.1103/PhysRevB.44.6466 ↗
29. Magnetic interfaces in Fe-based nanocrystalline alloys determined by Mössbauer spectrometry10.1103/PhysRevB.56.R8491 ↗
30. Molecular‐dynamics study of the synthesis and characterization of a fully dense, three‐dimensional nanocrystalline material10.1063/1.360275 ↗
31. Thermodynamic analysis on metastable alumina formation in aluminum deoxidized iron based on Ostwald's step rule and classical homogeneous nucleation theories10.2355/isijinternational.42.467 ↗
32. Effect of Mg addition on the refinement and homogenized distribution of inclusions in steel with different Al contents10.1007/s11663-017-0915-y ↗
33. degree of undercooling and contact angle of pure iron at 1933 K on single-crystal Al2O3, MgO, and MgAl2O4 under argon atmosphere with controlled oxygen partial pressure10.2355/isijinternational.49.985 ↗
34. Review of data for the surface tension of iron and its binary alloys10.1179/imr.1988.33.1.1 ↗
35. Interfacial properties of dilute Fe-OS melts on alumina substrates10.2355/isijinternational.38.229 ↗
36. Interfacial phenomena during wetting of graphite/alumina mixtures by liquid iron10.2355/isijinternational.43.1 ↗
37. Thermodynamics of nucleation and supersaturation for the aluminum-deoxidation reaction in liquid iron10.1007/s11663-999-0112-8 ↗
38. Zhang · Metall. Res. Tech. · 2020 · 117 · 11010.1051/metal/2020002 ↗
39. Mathematical Model for Prediction of Composition of Inclusions Formed during Solidification of Liquid Steel10.2355/isijinternational.49.1819 ↗
40. Prediction of inclusion evolution during refining and solidification of steel: Computational simulation and experimental confirmation10.1007/s11663-020-01812-0 ↗
41. Precipitation behaviors of TiN inclusion in GCr15 bearing steel billet10.1007/s11663-018-1230-y ↗
42. Thermodynamic insight into the growth of calcia inclusions at the nanoscale: the case of Fe-O-Ca melt10.1039/C9RA01337G ↗
43. Behavior of inclusions in deoxidation process of molten steel with in situ produced Mg vapor10.2355/isijinternational.47.699 ↗