Oxidation behavior of CoCr2−xFeNi2.1Nbx high entropy alloys
Source abstract
Abstract
High entropy alloys (HEAs) are one of the prominent alloy systems being studied for high-temperature applications. One of the key aspects to consider for high-temperature applications is to understand their oxidation behavior. When Nb is added as the alloying element to base FCC alloy like CoCrFeNi it promotes the formation of dual phase HEA. In the present study, the high-temperature oxidation behavior of annealed CoCr 2−xFeNi 2.1Nb x (x = 0.25, 0.5 and 1) isothermally at 800 °C in the air is studied. As-homogenized microstructure of these alloys shows a dual phase containing FCC and Laves phase. The amount of Laves phase increases with increasing Nb content. The oxidation kinetics of the three compositions follows parabolic kinetics at 800 °C. The characterization (XRD, Raman, SEM) of the oxide layer reveals the formation of Cr 2O 3 as the main oxide layer. The cross-sectional SEM images of the oxide samples after 96 h of oxidation confirms absence of internal oxidation and a thin Laves-rich region below the Cr 2O 3 layer. The preferential formation of Cr 2O 3 over Nb oxides is explained using the assessment of their thermodynamic activity in the FCC phase.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. A novel copper dominated hypereutectic high entropy alloy with high hardness and good wear resistance10.1016/j.matchar.2023.112865 ↗
4. Investigation of mechanical and corrosion properties of light and high hardness cast AlTiVCrCu0.4 high entropy alloy10.1016/j.matchar.2023.112878 ↗
5. In-situ formed oxide enables extraordinary high-cycle fatigue resistance in additively manufactured CoCrFeMnNi high-entropy alloy
6. Enhanced fatigue resistance of a face-centered-cubic single-phase Al0.3CoCrFeNi high-entropy alloy through planar deformation characteristic10.1016/j.msea.2022.144499 ↗
7. L12-strengthened heterostructure high-entropy alloys with ultra-high strength over a wide temperature range10.1016/j.msea.2022.143712 ↗
8. Stability of FeCrNiTiAl high-entropy alloy at high temperature10.1080/25787616.2021.2019390 ↗
9. Enhancing the radiation tolerance of high-entropy alloys via solute-promoted chemical heterogeneities10.1016/j.actamat.2022.118662 ↗
10. Enhancing the oxidation resistance of nanocrystalline high-entropy AlCuCrFeMn alloys by the addition of tungsten10.1016/j.jmrt.2022.11.078 ↗
11. Tailoring high-temperature oxidation resistance of FeCrMnVSix high entropy alloy coatings via building Si-rich dendrite microstructure10.1016/j.apsusc.2022.154862 ↗
12. Effect of Nb content on the microstructure and corrosion resistance of FeCoCrNiNbx high-entropy alloys in chloride ion environment10.1016/j.jallcom.2022.168013 ↗
13. Yield strength insensitivity in a dual-phase high entropy alloy after prolonged high temperature annealing10.1016/j.msea.2021.141586 ↗
14. High-temperature ultra-strength of dual-phase Re0.5MoNbW(TaC)0.5 high-entropy alloy matrix composite10.1016/j.jmst.2020.12.015 ↗
15. Enhancing mechanical properties of dual-phase Al0.5CoCrFeNiSi0.25 high entropy alloy via thermomechanical treatment10.1016/j.jallcom.2022.166141 ↗
16. High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy10.1016/j.intermet.2018.04.006 ↗
17. Oxidation behavior of high-entropy alloys AlxCoCrFeNi (x=0.15, 0.4) in supercritical water and comparison with HR3C steel10.1016/S1003-6326(15)63733-5 ↗
18. Oxidation study of CoCrCuFeNiSix high entropy alloys
19. A crucial review on recent updates of oxidation behavior in high entropy alloys10.1007/s42452-021-04374-1 ↗
20. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
21. Effects of Y and Al additions on the microstructure and tensile properties of CoCr3Fe5Ni high entropy alloys10.1016/j.matlet.2021.130110 ↗
22. Designing CoCrFeNi-M (M = Nb, Ta, Zr, and Hf) eutectic high-entropy alloys via a modified simple mixture method10.1016/j.jallcom.2023.168975 ↗
23. Nonlinear oxidation behavior in pure Ni and Ni-containing entropic alloys
24. The oxidation behavior of Ni2FeCoCrAlx high-entropy alloys in dry air10.1016/j.jallcom.2020.155518 ↗
25. Effect of Al and Ti on high-temperature oxidation behavior of CoCrFeNi-based high-entropy alloys10.1007/s11837-019-03679-2 ↗
26. Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys10.1016/j.intermet.2015.01.004 ↗
27. Effect of niobium on microstructure and properties of the CoCrFeNbxNi high entropy alloys10.1016/j.jmst.2016.09.016 ↗
28. Effect of niobium alloying on the microstructure, phase stability and mechanical properties of CoCrFeNi2.1Nbx high entropy alloys: experimentation and thermodynamic modeling10.1016/j.msea.2020.139897 ↗
29. Evaluation of Laves-phase forming Fe–Cr alloy for SOFC interconnects in reducing atmosphere10.1016/j.jpowsour.2007.10.041 ↗
30. The role of Nb on the high temperature oxidation behavior of CoCrFeMnNbxNi high-entropy alloys10.1016/j.corsci.2019.07.012 ↗