Fabrication and properties of (W+B)/Al hybrid composites for nuclear radiation shielding
Source abstract
Abstract
A novel non-lead, lightweight nuclear shielding material was developed by introducing W and B particles as functional components into 6061 Al alloy. The ball-milling and spark plasma sintering (SPS) were employed to fabricate the (W+B)/Al hybrid composites. Some dominant process parameters, such as ball milling time, holding time, etc, were optimized. Subsequently, the effect of W volume fraction on the microstructure and mechanical properties as well as radiation shielding performance of the composites were thoroughly investigated. It is demonstrated that the W particles are homogenously distributed throughout the Al matrix with a W volume fraction less than 20 %. Al 12 W is identified as an interfacial product at the Al-W interface. The composites containing 20 vol% tungsten particles exhibits the highest mechanical strength. When the volume fraction of W particles increases to 30 vol%, severe agglomeration of W particles occurs, and the mechanical properties are considerably deteriorated. Compared with 6061Al, the influence of T6 heat treatment on the strength of the composites is insignificant, especially for the composites with a high W content. The γ-ray shielding properties of the composites are significantly improved with increasing W content. The linear attenuation coefficient is up to 0.32 cm −1 for the composites with 30 vol% W. The thermal neutron absorption rate of the (W+B)/Al composites all achieve 99 % with a thickness of 2.2 cm. The results suggest that the developed (W+B)/Al hybrid composites exhibit extraordinary application potential as a structure-function integrated nuclear shielding materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphite, nuclear technology, radiation studies · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Recent advances in nuclear power: a review10.1016/j.pnucene.2008.05.001 ↗
2. Experimental and Monte Carlo simulation study on potential new composite materials to moderate neutron-gamma radiation10.1016/j.pnucene.2020.103538 ↗
3. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
4. The thermal-neutron-absorption cross sections of 6Li and 10B10.13182/NSE70-A18875 ↗
5. A Measurement of the 10B(n,αγ)7Li Cross Section in the keV Energy Region10.13182/NSE78-A27289 ↗
6. A Relative Measurement of the10B(n,α1γ)7Li Cross Section Between 0.2 and 4.0 MeV10.13182/NSE93-A24044 ↗
7. Cross-section measurement for the 10B(n, α)7Li reaction at 4.0 and 5.0 MeV10.1016/j.apradiso.2007.07.035 ↗
8. The design, microstructure and mechanical properties of B4C/6061Al neutron absorber composites fabricated by SPS10.1016/j.matdes.2016.01.030 ↗
9. Microstructure evolution and mechanical properties of B4C/6061Al neutron absorber composite sheets fabricated by powder metallurgy10.1016/j.jallcom.2017.09.312 ↗
10. Microstructure and mechanical properties of B4C/6061Al laminar composites fabricated by power metallurgy10.1016/j.vacuum.2017.06.009 ↗
11. Multilayer polyethylene/ hexagonal boron nitride composites showing high neutron shielding efficiency and thermal conductivity10.1016/j.coco.2020.03.007 ↗
12. An experimental study on the investigation of nuclear radiation shielding characteristics in iron-boron alloys10.1016/j.jallcom.2019.152946 ↗
13. Nano-W dispersed gamma radiation shielding materials10.1002/adem.201400127 ↗
14. Conventional and new lead-free radiation shielding materials for radiation protection in nuclear medicine: a review10.1016/j.radphyschem.2019.108439 ↗
15. Tungsten-based material as promising new lead-free gamma radiation shielding material in nuclear medicine10.1016/j.ejmp.2020.08.017 ↗
16. Mechanical properties and gamma-ray shielding performance of 3D-printed poly-ether-ether-ketone/tungsten composites10.3390/ma13204475 ↗
17. Preparation and characterization of tungsten/epoxy composites for γ-rays radiation shielding10.1016/j.nimb.2015.04.062 ↗
18. Microstructures and properties of a multilayered Al/W composite fabricated for γ-ray-shielding applications10.1016/j.radphyschem.2022.110209 ↗
19. Multilayer structuring of nonleaded metal (BiSn)/polymer/tungsten composites for enhanced γ‐ray shielding10.1002/adem.201901448 ↗
20. Microstructure and properties of WB/Al nuclear shielding composites prepared by spark plasma sintering10.1016/j.ceramint.2022.07.131 ↗
21. Feasibility of nanomaterial tungsten carbide as lead-free nanomaterial-based radiation shielding10.1016/j.radphyschem.2022.110492 ↗
22. Microstructure and mechanical properties of 6061 Al alloy based composites with SiC nanoparticles10.1016/j.jallcom.2014.01.134 ↗
23. technology innovation in aluminum products10.1007/s11837-001-0115-7 ↗
24. Microstructural control of an Al–W aluminum matrix composite during direct laser metal deposition10.1016/j.jallcom.2019.152208 ↗
25. Synthesis and consolidation via spark plasma sintering of nanostructured Al-5356-B4C composite10.1016/j.msea.2011.02.079 ↗
26. Effect of grain size reduction of AA2124 aluminum alloy powder compacted by spark plasma sintering10.1016/j.jallcom.2014.04.136 ↗
27. Field‐assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments10.1002/adem.201300409 ↗
28. Consistency and shielding efficiency of cement-bitumen composite for use as gamma-radiation shielding material10.1016/j.pnucene.2021.103764 ↗
29. Comparative study of different concrete composition as gamma-ray shielding materials10.1016/j.anucene.2015.05.011 ↗
30. The design of a novel neutron shielding B4C/Al composite containing Gd10.1016/j.matdes.2016.07.140 ↗
31. Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites10.1016/j.compositesa.2012.07.026 ↗
32. Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method10.1016/j.carbon.2018.09.041 ↗
33. Cryomilling for the fabrication of a particulate B4C reinforced Al nanocomposite: Part II. Mechanisms for microstructural evolution10.1007/s11661-006-0191-y ↗
34. Production and characterization of aluminum powder derived from mechanical saw chips and its processing through powder metallurgy10.1016/j.powtec.2019.10.028 ↗
35. Mechanical behavior of Al-SiC nanocomposites produced by ball milling and spark plasma sintering10.1007/s11661-013-1874-9 ↗
36. Effects of milling process parameters and PCAs on the synthesis of Al0.8Co0.5Cr1.5CuFeNi high entropy alloy powder by mechanical alloying10.1016/j.matdes.2022.110637 ↗
37. Optimization of mechanical alloying parameters of Cu25W electrical contact material10.12693/APhysPolA.132.909 ↗
38. Microstructure and mechanical properties of Al-TiB2/TiC in situ composites improved via hot rolling10.1016/S1003-6326(17)60283-8 ↗