journal article·2023-08

Fluence- and thickness-dependent microstructure evolutions in Ti-Zr-Hf-Nb-Ta high entropy alloy thin films

Nan Wang, Qingping Cao, Xiaodong Wang, Shaoqing Ding, Dongxian Zhang, Jian-Zhong Jiang

Publisher page

Abstract

Refractory Ti-Zr-Hf-Nb-Ta high entropy alloy (HEA) attracts numerous attention owing to its ductility at room temperature and biomedical application. Extensive work on mechanical properties of this alloy has been done in the bulk alloy, however, there is limited work dedicated to the investigation in thin film. In this work, a series of Ti-Zr-Hf-Nb-Ta thin films with the deposition power from 60 W to 360 W and film thickness of ∼1.5–2.0 µm are prepared. The film morphology, microstructure and nano-mechanical properties can be controlled by the deposition power and film thickness. With increasing deposition power, the amorphous fraction experiences a process of first decreasing and then increasing, and finally decreasing for 2.0 µm-thick film (saturation for 1.5 µm-thick film). The competition between adatom diffusion, available time and elevated temperature during deposition decides the phase selection in various deposition power range. At low deposition power range, adatom diffusivity is dominant, leading to the increased crystallinity with power. At intermediate power range, available time for atomic rearrangement controls phase selection, causing the regaining of amorphous phase . The elevated temperature effect is responsible for re-devitrification at high deposition power range. Furthermore, thicker film possesses higher crystallinity than thinner counterpart, and the crystallinity difference between ∼1.5 µm- and ∼2 µm-thick films at the same deposition power depends on atomic fluence. Also, continuous strengthening from 60 W- to 360 W-thin film are observed, which can be attributed to improved adhesion between nanocolumns at low deposition power range and bombardment effect at high deposition power range. This work sheds a comprehensive and profound light on deposition power-structure and film thickness-structure correlations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. High entropy alloys: Key issues under passionate debate10.1016/j.scriptamat.2020.07.010 ↗
4. Phase selection, lattice distortions, and mechanical properties in high-entropy alloys10.1002/adem.202000466 ↗
5. A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range10.1126/sciadv.abi4404 ↗
6. Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
7. Corrosion behavior of Al-containing CoNiV alloys10.1016/j.corsci.2022.110567 ↗
8. Tuning nanostructure and mechanical property of Fe-Co-Ni-Cr-Mn high-entropy alloy thin films by substrate temperature
9. Size dependent structural stability of Mo, Ru, Y and Sc nanoparticles10.1016/j.jpcs.2017.04.010 ↗
10. Tuning microstructure and enhancing mechanical properties of Co-Ni-V-Al medium entropy alloy thin films via deposition power10.1016/j.jallcom.2021.160003 ↗
11. Microstructure characterization of AlxCo1Cr1Cu1Fe1Ni1 (x=0 and 2.5) high-entropy alloy films10.1016/j.jallcom.2014.04.094 ↗
12. Controlled synthesis of nanostructured glassy and crystalline high entropy alloy films
13. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy10.1016/j.actamat.2019.04.018 ↗
14. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
15. Novel Ti-Zr-Hf-Nb-Fe refractory high-entropy alloys for potential biomedical applications10.1016/j.jallcom.2022.164383 ↗
16. Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications10.1016/j.intermet.2019.106572 ↗
17. Nanostructured multi-element (TiZrNbHfTa)N and (TiZrNbHfTa)C hard coatings10.1016/j.surfcoat.2011.09.033 ↗
18. New HfNbTaTiZr high-entropy alloy coatings produced by electrospark deposition with high corrosion resistance10.3390/ma14154333 ↗
19. High hardness and fatigue resistance of CoCrFeMnNi high entropy alloy films with ultrahigh-density nanotwins10.1016/j.ijplas.2020.102726 ↗
20. Ultrahigh specific hardness of Co-Ni-V-Al medium entropy alloy thin films
21. Thermal behavior and glass transition of Zr-based bulk metallic glasses10.1016/j.msea.2003.10.125 ↗
22. Ti-based bulk metallic glasses with high specific strength10.2320/matertrans.45.595 ↗
23. Effects of cooling rates on the mechanical properties of a Ti-based bulk metallic glass10.1007/s11433-010-0136-8 ↗
24. Co-based ternary bulk metallic glasses with ultrahigh strength and plasticity10.1557/jmr.2011.187 ↗
25. Crystallization of Fe, Co and Ni based metallic glasses10.1016/0025-5416(76)90187-7 ↗