The vertically network modifications on Li/Garnet interface for prolonging Li metal batteries life
Source abstract
Abstract
The Li dendrites can penetrate the hard garnet ceramics in the solid-state lithium metal batteries (SSLMBs), severely impairing the cycle life of the battery. Herein, a facile Li/Garnets interface modification strategy is reported to mitigate the adverse effects of Li dendrite penetration, which refers to the insertion of anodized aluminum oxide (AAO) membranes with vertically aligned nanoscale channels at the Li/Garnets interface. As a result, the AAO membranes can confine the deposited Li metal in channels during cycling and induce the Li metal across the channels to continue to depositing uniformly on AAO surface. Furthermore, the deposited Li metal tends to react with AAO to form Li-Al-O compounds, which strengthens the confinement effects to Li metal. The results demonstrate that the full cell with Li/Garnets interface modified by 300 nm aperture AAO exhibits excellent cycling performance, which remain discharge specific of 93.5mAh g −1 (initial: 138.1mAh g −1) after stable operating 716 cycles at 0.2 C. The Li/Li symmetric battery can stably cycle above 1000 h at 0.5 mA cm −2 and 100 h under 1 mA cm −2. This facile method of directly inserting nanoscale vertically aligned network into Li/Garnets interface provides a new approach to promote application of garnets ceramics in SSLMBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. 30 years of lithium‐ion batteries
2. Protected lithium‐metal anodes in batteries: from liquid to solid10.1002/adma.201701169 ↗
3. Solid garnet batteries10.1016/j.joule.2019.03.019 ↗
4. Elastic properties of the solid electrolyte Li7La3Zr2O12(LLZO)10.1021/acs.chemmater.5b03854 ↗
5. Intergranular li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte10.1016/j.electacta.2016.12.018 ↗
6. Suppressing lithium dendrites within inorganic solid-state electrolytes
7. Interfacial effects in lithium and sodium batteries10.1002/aenm.202001455 ↗
8. Toward a fundamental understanding of the lithium metal anode in solid-state batteries—an electrochemo-mechanical study on the garnet-type solid electrolyte Li6.25Al0.25La3Zr2O1210.1021/acsami.9b02537 ↗
9. Simulation of the effect of contact area loss in all-solid-state Li-ion batteries10.1149/2.0481711jes ↗
10. Electro–chemo–mechanical issues at the interfaces in solid‐state lithium metal batteries
11. Highly stable garnet solid electrolyte based li-s battery with modified anodic and cathodic interfaces10.1016/j.ensm.2018.05.018 ↗
12. Acid induced conversion towards a robust and lithiophilic interface for Li–Li7La3Zr2O12 solid-state batteries10.1039/C9TA01911A ↗
13. In-situ formed Li2CO3-free garnet/li interface by rapid acid treatment for dendrite-free solid-state batteries10.1016/j.nanoen.2019.04.058 ↗
14. Garnet electrolyte with an ultralow interfacial resistance for Li-metal batteries10.1021/jacs.8b03106 ↗
15. In situ formed shields enabling Li2CO3-free solid electrolytes: a new route to uncover the intrinsic lithiophilicity of garnet electrolytes for dendrite-free li-metal batteries10.1021/acsami.8b18356 ↗
16. Negating interfacial impedance in garnet-based solid-state li metal batteries10.1038/nmat4821 ↗
17. Transient behavior of the metal interface in lithium metal-garnet batteries10.1002/anie.201708637 ↗
18. Transition from superlithiophobicity to superlithiophilicity of garnet solid-state electrolyte10.1021/jacs.6b06777 ↗
19. Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries10.1039/C8TA02276C ↗
20. Conformal, nanoscale ZnO surface modification of garnet-based solid-state electrolyte for lithium metal anodes10.1021/acs.nanolett.6b04695 ↗
21. Lithium-graphite paste: an interface compatible anode for solid-state batteries
22. Highly adhesive Li-BN nanosheet composite anode with excellent interfacial compatibility for solid-state li metal batteries10.1021/acsnano.9b08803 ↗
23. Graphitic carbon nitride (g-C3N4): an interface enabler for solid‐state lithium metal batteries10.1002/ange.201914417 ↗
24. In situ formation of a bifunctional interlayer enabled by a conversion reaction to initiatively prevent lithium dendrites in a garnet solid electrolyte10.1039/C8EE03390K ↗
25. Design of a mixed conductive garnet/Li interface for dendrite-free solid lithium metal batteries10.1039/C9EE01903K ↗
26. An in situ-formed mosaic Li7Sn3/LiF interface layer for high-rate and long-life garnet-based lithium metal batteries10.1021/acsami.9b10534 ↗
27. In situ construction of an ultra‐stable conductive composite interface for high‐voltage all‐solid‐state lithium metal batteries10.1002/anie.202000547 ↗
28. A facile and low-cost wet-chemistry artificial interface engineering for garnet-based solid-state li metal batteries10.1016/j.nanoen.2022.107603 ↗
29. Cryo-EM studies of atomic-scale structures of interfaces in garnet-type electrolyte based solid-state batteries10.1002/adfm.202208682 ↗
30. High-performance sandwiched hybrid solid electrolytes by coating polymer layers for all-solid-state lithium-ion batteries10.1007/s12598-020-01678-w ↗
31. Stabilizing lithium metal anodes by uniform Li-ion flux distribution in nanochannel confinement10.1021/jacs.6b08730 ↗
32. Dendrite-free lithium deposition induced by uniformly distributed lithium ions for efficient lithium metal batteries10.1002/adma.201506124 ↗
33. Dendrite‐free lithium anode via a homogenous Li‐ion distribution enabled by a kimwipe paper10.1002/adsu.201600034 ↗
34. Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes10.1002/anie.201702099 ↗
35. 3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries10.1016/j.nanoen.2017.05.015 ↗
36. Dendrite‐free reverse lithium deposition induced by ion rectification layer toward superior lithium metal batteries10.1002/adfm.202104081 ↗
37. Functional separators regulating ion transport enabled by metal‐organic frameworks for dendrite‐free lithium metal anodes10.1002/adfm.202102938 ↗
38. Advanced nanoporous separators for stable lithium metal electrodeposition at ultra-high current densities in liquid electrolytes10.1039/C9TA13778E ↗
39. Nanoporous hybrid electrolytes for high‐energy batteries based on reactive metal anodes10.1002/aenm.201602367 ↗
40. Inhibition of lithium dendrite formation in lithium metal batteries via regulated cation transport through ultrathin sub‐nanometer porous carbon nanomembranes
41. Stability analysis of electrodeposition across a structured electrolyte with immobilized anions10.1149/2.085405jes ↗
42. Over-limiting current and control of dendritic growth by surface conduction in nanopores
43. Interactions between lithium growths and nanoporous ceramic separators10.1016/j.joule.2018.08.018 ↗
44. Morphological reversibility of modified li-based anodes for next-generation batteries10.1021/acsenergylett.9b02424 ↗
45. In-depth interfacial chemistry and reactivity focused investigation of lithium–imide- and lithium–imidazole-based electrolytes10.1021/acsami.6b04406 ↗
46. A Li–Al–O solid‐state electrolyte with high ionic conductivity and good capability to protect Li anode10.1002/adfm.201905949 ↗
47. A 3D-printed framework with a gradient distributed heterojunction and fast Li+ conductivity interfaces for high-rate lithium metal anodes10.1039/D2TA06636J ↗
48. A leaf-like Al2O3-based quasi-solid electrolyte with a fast Li+ conductive interface for stable lithium metal anodes10.1039/D0TA02098B ↗
49. In situ transmission electron microscopy observation of pulverization of aluminum nanowires and evolution of the thin surface Al2O3 layers during lithiation-delithiation cycles10.1021/nl202088h ↗