In vitro evaluation of a novel Mg–Sn–Ge ternary alloy for orthopedic applications
Source abstract
Abstract
Magnesium (Mg) and its alloys have attracted considerable attention owing to their excellent biodegradable properties and biocompatibility. Novel Mg-Sn-Ge ternary Mg alloys were developed as potential biodegradable materials for orthopedic applications because of their alloying elements naturally present in humans. The feasibility of these alloys was investigated in terms of mechanical properties, degradation, cytocompatibility, and hemocompatibility. The hardness and elastic modulus of Mg-2Sn-xGe alloys were improved significantly by increasing the Ge content. Among all the alloys, the Mg-2Sn-3Ge alloy displays outstanding biodegradable properties, as evidenced by the electrochemical tests and hydrogen evolution. The degradation products detected on the corroded alloy surfaces weaken at higher Ge levels. The in vitro cytotoxicity assay and hemolysis test showed that the Mg-2Sn-xGe alloys exhibit favorable biocompatibility and hemocompatibility, except for the Mg-2Sn-2Ge alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. In vitro biodegradation testing of Mgalloy ZK400 and manufacturing of implant prototypes using PM (powder metallurgy) methods
2. Inflfluence of stamping on the biodegradation behavior of Mg–2Zn-0.5 Nd (ZN20) sheet
3. Enhanced anti-corrosion and biocompatibility of a functionalized layer formed on zk60 Mg alloy via hydroxyl (OH-) ion implantation10.1016/j.colsurfb.2022.112533 ↗
4. In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn–Mg alloy10.1002/jbm.b.33341 ↗
5. Current research studies of Mg-Ca-Zn biodegradable alloys used as orthopedic implants
6. In vitro and in vivo assessment of squeeze-cast Mg-Zn-Ca-Mn alloys for biomedical applications10.1016/j.actbio.2022.07.040 ↗
7. Implant degradation of low-alloyed Mg–Zn–Ca in osteoporotic, old and juvenile rats10.1016/j.actbio.2022.05.041 ↗
8. Calcium: magnesium intake ratio and colorectal carcinogenesis, results from the prostate, lung, colorectal, and ovarian cancer screening trial
9. Microstructural, electrochemical and in vitro analysis of Mg-0.5 Ca-xGd biodegradable alloys10.3390/app11030981 ↗
10. Mechanical properties of Mg-Gd and Mg-Y solid solutions10.1007/s11663-015-0565-x ↗
11. Process parameters and diecasting of Norand’s AJ52 high temperature Mg–Al–Sr alloy
12. A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics10.1016/j.biomaterials.2011.01.004 ↗
13. In vitro and in vivo studies on ultrafine-grained biodegradable pure Mg, Mg–Ca alloy and Mg–Sr alloy processed by high-pressure torsion10.1039/D0BM00805B ↗
14. Recent advances on the development of magnesium alloys for biodegradable implants10.1016/j.actbio.2014.07.005 ↗
15. Preparation and characterization of as-extruded Mg–Sn alloys for orthopedic applications10.1016/j.matdes.2014.12.041 ↗
16. Effect of tin modifification on corrosion of AM70 magnesium alloy10.1016/j.corsci.2009.05.031 ↗
17. Tensile properties of hot rolled Mg–3Sn–1Ca alloy sheets at elevated temperatures10.1016/j.matdes.2011.03.051 ↗
18. The corrosion of solid solution Mg-Sn binary alloys in NaCl solutions10.1016/j.electacta.2018.11.118 ↗
19. Germanium: Environmental pollution and health effects
20. Biological activity of organogermanium compounds (a Review)10.1007/s11094-013-0860-2 ↗
21. Microstructure evolution and mechanical properties of Mg–Ge binary magnesium alloys10.1179/143307510X12639910071638 ↗
22. Development of magnesium-based biodegradable metals with dietary trace element germanium as orthopaedic implant applications10.1016/j.actbio.2017.10.004 ↗
23. An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys
24. ASTM G31-72 · 2004
25. Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
26. Formation and breakdown of surface films on magnesium and its alloys in aqueous solutions10.1016/j.corsci.2006.05.033 ↗
27. Corrosion mechanisms of magnesium alloys10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
28. Corrosion behavior of as-cast Mg–5Sn based alloys with in additions in 3.5 wt% NaCl solution10.1016/j.corsci.2019.108318 ↗
29. The effect of Zn concentration on the corrosion behavior of Mg–xZn alloys10.1016/j.corsci.2012.08.037 ↗
30. Long-term anticorrosion behaviour of polyaniline on mild steel10.1016/j.corsci.2006.11.007 ↗
31. Corrosion and passivation of magnesium alloys10.1016/j.corsci.2016.05.041 ↗
32. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
33. Constant-phase-element behavior caused by resistivity distributions in films: I. theory10.1149/1.3499564 ↗
34. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
35. On the use of the power-law model for interpreting constant-phase-element parameters
36. Magnesium in the murine artery: probing the products of corrosion10.1016/j.actbio.2013.11.021 ↗
37. Calcium phosphate interactions with titanium oxide and alumina substrates: an XPS study
38. Kinetic and thermodynamic studies of MgHPO4·3H2O by nonIsothermal decomposition data10.1007/s10973-009-0108-2 ↗
39. Inflfluence of albumin and inorganic ions on electrochemical corrosion behavior of plasma electrolytic oxidation coated magnesium for surgical implants10.1016/j.apsusc.2013.05.100 ↗
40. Cytotoxicity assessment of adipose-derived mesenchymal stem cells on synthesized biodegradable Mg-Zn-Ca alloys10.1016/j.msec.2016.07.016 ↗
41. ISO 10993-5:2009(E) · 2009
42. ASTM F756–17 · 2017
43. Study on the Mg-Li-Zn ternary alloy system with improved mechanical properties, good degradation performance and different responses to cells10.1016/j.actbio.2017.08.021 ↗
44. The Mg- Sn (magnesium-tin) system10.1007/BF02872898 ↗
45. The inflfluence of Ge on the properties of Mg alloys
46. Microstructure, mechanical and corrosion properties of novel Mg-Sn-Ce alloys produced by high pressure die casting10.1016/j.msec.2019.110064 ↗
47. Standard electrode potentials and temperature coefficients in water at 298.15 k10.1063/1.555839 ↗
48. Biodegradable ternary Zn–3Ge–0.5 x (x= Cu, Mg, and Fe) alloys for orthopedic applications10.1016/j.actbio.2020.08.033 ↗
49. Research progress of new type of degradable biomedical magnesium alloys JDBM
50. Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective
51. Zinc-based biomaterials for regeneration and therapy10.1016/j.tibtech.2018.10.009 ↗
52. The influence of arsenic alloying on the localised corrosion behaviour of magnesium10.1016/j.electacta.2016.10.006 ↗
53. Tin
54. Accumulation of germanium in the tissues of a long-term user of germanium preparation died of acute renal failure10.2131/jts.10.333 ↗
55. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials10.1016/j.actbio.2015.04.011 ↗
56. Understanding the influence of solution's pH on the corrosion of tin in saline solution containing functional amino acids using electrochemical techniques and molecular modeling
57. Red blood cell damage from extracorporeal circulation in hemodialysis