Porous tungsten synthesized via dealloying: Fe6W6C induced structure modification and mechanical behavior
Source abstract
Abstract
Porous tungsten with high strength is required in the nuclear industry. However, porous metals prepared by dealloying suffer from grain boundary separation and poor connectivity of the generated ligament structure, resulting in limited strength. This work synthesized porous tungsten with high strength by dealloying with Fe 6W 6C as the bonding phase. The sintering temperature of the precursor and C content on the Fe 6W 6C content are investigated, and the effects of Fe 6W 6C content on the microstructure and mechanical properties of porous tungsten are systematically studied. Fe 6W 6C can be controlled by precursor sintering temperature and C content. Temperature is the main factor affecting the Fe 6W 6C content. The ideal W framework is achieved at the sintering temperature is 800 °C when the C addition is 0.1–0.3 wt. % and the amount of Fe 6W 6C generated is 9.1–27.2 wt. %. After heat treatment, Fe 6W 6C rearranges under the effect of surface tension and fills into the sintered neck and the gap between the W grain, forming a smooth and continuous W-Fe 6W 6C composite ligament. The increase of Fe 6W 6C leads to increased ligament width, reduced “dangling ligaments” and curvature of neck, thereby improving the mechanical properties of porous tungsten. The porosity of porous tungsten ranges from 68.1 % to 70.6 %, and the highest compressive strength is 105 MPa. This work provides a theoretical reference for designing and preparing high-performance porous tungsten.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoporous metals and alloys · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Recrystallization temperature of tungsten with different deformation degrees10.1007/s12598-014-0315-2 ↗
2. High current liquid metal ion source using porous tungsten multiemitters10.1016/j.ultramic.2010.09.005 ↗
3. Microstructural evolution and mechanical behavior of porous W reinforced by in-situ W2C10.1016/j.jallcom.2019.05.124 ↗
4. Microstructure and mechanical behavior of porous tungsten skeletons synthesized by selected laser melting10.1016/j.ijrmhm.2021.105769 ↗
5. Cryogenic machining of porous tungsten for enhanced surface integrity10.1016/j.jmatprotec.2015.10.002 ↗
6. Porous tungsten machining under cryogenic conditions10.1016/j.ijrmhm.2012.04.009 ↗
7. Fabrication of homogeneous tungsten porous matrix using spherical tungsten powders prepared by thermal plasma spheroidization process10.1016/j.ijrmhm.2016.06.002 ↗
8. Reactive sintering of porous tungsten: a cost effective sustainable technique for the manufacturing of high current density cathodes to be used in flashlamps10.1016/j.jmatprotec.2005.05.037 ↗
9. Porous structure uniformity investigation of tungsten matrix prepared by jet milled and annealed tungsten powder10.1016/j.powtec.2018.08.021 ↗
10. Porous tungsten prepared by atmospheric-pressure chemical vapor deposition with WF6 and its characterization
11. Ice-templated porous tungsten and tungsten carbide inspired by natural wood10.1016/j.jmst.2019.10.021 ↗
12. Vapor phase dealloying: a versatile approach for fabricating 3D porous materials10.1016/j.actamat.2018.10.012 ↗
13. Self-organizing Ag-decorated nanoporous Cu by dealloying process10.1016/j.scriptamat.2021.114337 ↗
14. Porous Ti alloy with enhanced mechanical property prepared via chemical dealloying combined subsequent molten salt electrolysis10.1016/j.msea.2022.143785 ↗
15. Fabrication and characterization of nanoporous Ag–Pt alloy10.1007/s12598-020-01551-w ↗
16. Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution10.1016/j.actamat.2019.10.030 ↗
17. Open-cell tungsten nanofoams: chloride ion induced structure modification and mechanical behavior10.1016/j.rinp.2020.103062 ↗
18. Hierarchical Fe6W6C enabling ultra-strong porous tungsten10.1016/j.msea.2022.143466 ↗
19. Self-assembled porous metal-intermetallic nanocomposites via liquid metal dealloying10.1016/j.actamat.2018.10.057 ↗
20. Size effects in the mechanical properties of bulk bicontinuous Ta/Cu nanocomposites made by liquid metal dealloying10.1002/adem.201500219 ↗
21. Synthesis and characterization of Fe6W6C by mechanical alloying10.1007/s10751-008-9587-y ↗
22. Structural, electronic and magnetic properties of η carbides (Fe3W3C, Fe6W6C, Co3W3C and Co6W6C) from first principles calculations10.1016/j.physb.2009.05.051 ↗
23. Electronic structure, anisotropic elastic and thermal properties of the η phase Fe6W6C10.1016/j.commatsci.2015.06.037 ↗
24. Influences of W contents on microstructures, mechanical properties and the shielding performance for neutrons and γ-rays of Fe–W–C alloy
25. Achieving porous tungsten with high porosity by selective dissolution of W-Fe alloy10.1016/j.scriptamat.2021.113830 ↗
26. FactSage thermochemical software and databases, 2010–201610.1016/j.calphad.2016.05.002 ↗
27. Investigation on the precipitation behavior of a Ni-based alloy containing tungsten during thermal exposure at 850°C10.1007/s11665-022-06797-2 ↗
28. Investigation on W/Fe diffusion bonding using Ti foil and Ti powder interlayer by SPS10.1016/j.jnucmat.2015.10.045 ↗
29. Additive manufacturing of W–Fe composites using laser metal deposition: Microstructure, phase transformation, and mechanical properties10.1016/j.msea.2021.141036 ↗
30. Microstructure and properties of W–4.9Ni–2.1Fe heavy alloy with Dy2O3 addition10.1007/s12598-019-01246-x ↗
31. Assessment of mechanical properties of SPS-produced tungsten including effect of neutron irradiation10.1016/j.ijrmhm.2020.105207 ↗
32. Microstructure and mechanical properties of dispersion strengthened tungsten by HIP treatment followed by thermal annealing
33. About one stable and three metastable eutectic microconstituents in the Fe–W–C system10.1016/j.ijrmhm.2007.09.001 ↗
34. Temperature and composition dependent surface tension of binary liquid alloys
35. Densification of W–Ni–Fe powders using laser sintering10.1016/j.ijrmhm.2016.01.006 ↗
36. Preparation methods and performance of new tungsten-based ceramic alloy10.1016/j.matdes.2021.109781 ↗
37. High-strength hierarchical-structured bulk nanoporous Cu prepared by dealloying and spark plasma sintering10.1016/j.scriptamat.2021.114114 ↗
38. Dynamic crushing of aluminum foams: part I – experiments10.1016/j.ijsolstr.2013.11.019 ↗
39. Evaluation of channel-like porous-structured titanium in mechanical properties and osseointegration10.1016/j.jmst.2019.10.026 ↗
40. Precise fabrication of open porous Mg scaffolds using NaCl templates: Relationship between space holder particles, pore characteristics and mechanical behavior10.1016/j.matdes.2017.11.064 ↗
41. Influence of the interface strength on the mechanical properties of discontinuous tungsten fiber-reinforced tungsten composites produced by field assisted sintering technology10.1016/j.compositesa.2018.01.022 ↗
42. Design of tungsten fiber-reinforced tungsten composites with porous matrix10.1016/j.msea.2021.141361 ↗
43. Synthesis, structure and mechanical properties of ice-templated tungsten foams10.1557/jmr.2016.62 ↗
44. Dealloying and morphology evolution of ordered and disordered Cu3Au10.1016/j.scriptamat.2019.09.008 ↗
45. Synthesis and mechanical properties of porous metals with inverted dealloying structure10.1016/j.scriptamat.2021.114483 ↗
46. Electroless dealloying of thin-film nanocrystalline Au-Ag alloys: mechanisms of ligament nucleation and sources of its synthesis variability10.1021/acsami.1c24388 ↗
47. Plateau Rayleigh instability simulation10.1021/la300622h ↗
48. Interpreting anomalous low-strength and low-stiffness of nanoporous gold: quantification of network connectivity10.1016/j.actamat.2016.07.033 ↗
49. A universal scaling relationship between the strength and Young’s modulus of dealloyed porous Fe0.80Cr0.2010.1016/j.actamat.2019.12.046 ↗
50. Influence of temperature on the fracture of a W-Ni-Fe alloy10.1023/A:1004840503664 ↗
51. Toughening of a low-activation tungsten alloy using tungsten short fibers and particles reinforcement for fusion plasma-facing applications10.1088/1741-4326/aaf43f ↗