Ion irradiation induced softening in Cr2AlC MAX phase
Source abstract
Abstract
MAX phases have exhibited excellent irradiation resistance regarding structure stability, but limited knowledge is available on the irradiation induced change in the mechanical performance of MAX phases. In this work, Cr 2 AlC single crystal samples were irradiated with 6 MeV C ions, and smaples’ mechanical properties were measured by micropillar compression test and nanoindentation technique. After irradiation, new slip traces are activated, which means the deformation behavior changed by irradiation. More important is that both the yield strength and Young’s modulus decrease gradually with the increasing irradiation doses up to 0.098 dpa, suggesting a significant radiation softening effect but not the radiation hardening effect which is very popular in other materials. This radiation softening effect is possible the result of the irradiation-induecd vacancies, which is supported by the DFT calculation. These results indicate that MAX phases like Cr 2AlC have an excellent irradiation tolerance regarding mechanical properties and is a new class of promising candidate material for the advanced nuclear systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The mn+1axn phases: a new class of solids: Thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
2. Ti3alc2, a candidate structural material for innovative nuclear energy system: the microstructure phase transformation and defect evolution induced by energetic heavy-ion irradiation10.1016/j.actamat.2020.03.008 ↗
3. Saturation of ion irradiation effects in max phase cr2alc10.1016/j.actamat.2016.03.021 ↗
4. Max phase carbides and nitrides: properties for future nuclear power plant in-core applications and neutron transmutation analysis10.1016/j.nucengdes.2011.12.009 ↗
5. Radiation tolerance of mn+1axn phases, ti3alc2 and ti3sic210.1016/j.actamat.2010.04.029 ↗
6. Irradiation-induced structural transitions in ti 2 alc10.1016/j.actamat.2015.07.043 ↗
7. Formation of nanosized hills on ti3sic2 oxide layer irradiated with swift heavy ions10.1016/j.nimb.2011.09.027 ↗
8. Chemically sensitive amorphization process in the nanolaminated Cr2AC (A = Al or Ge) system from TEM in situ irradiation10.1016/j.jnucmat.2013.05.028 ↗
9. Heavy ion irradiation damage in Zr2AlC MAX phase10.1016/j.jnucmat.2019.05.034 ↗
10. Structural transitions induced by ion irradiation in V2 AlC and Cr2 AlC10.1111/jace.14118 ↗
11. High temperature ion irradiation effects in max phase ceramics10.1016/j.actamat.2015.11.055 ↗
12. Nanoindentation investigation of heavy ion irradiated ti3(si,al)c210.1016/j.jnucmat.2010.04.015 ↗
13. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗
14. Tem, xrd and nanoindentation characterization of xenon ion irradiation damage in austenitic stainless steels10.1016/j.jnucmat.2014.07.033 ↗
15. Effect of neutron irradiation on deformation mechanisms operating during tensile testing of zr-2.5nb10.1016/j.actamat.2015.09.032 ↗
16. In situ nanocompression testing of irradiated copper10.1038/nmat3055 ↗
17. Mechanical behavior of the hfnbzrti high entropy alloy after ion irradiation based on micro-pillar compression tests10.1016/j.jallcom.2021.162043 ↗
18. Mechanical annealing and source-limited deformation in submicrometre-diameter ni crystals10.1038/nmat2085 ↗
19. Micropillar compression study on heavy ion irradiated zr-2.5nb pressure tube alloy10.1016/j.jnucmat.2018.09.021 ↗
20. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
21. High temperature solution growth and characterization of Cr2AlC single crystals10.1016/j.jcrysgro.2013.09.021 ↗
22. Synthesis of single crystals of V2AlC phase by high-temperature solution growth and slow cooling technique10.1016/j.actamat.2014.10.018 ↗
23. On the use of srim for computing radiation damage exposure10.1016/j.nimb.2013.05.008 ↗
24. An improved echnique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
25. First-principles study of the structural and elastic properties of cr2alx (x = n, c) compounds10.1016/j.jssc.2012.03.014 ↗
26. Enhanced radiation tolerance of ysz/al2o3 multilayered nanofilms with pre-existing nanovoids10.1016/j.actamat.2017.11.018 ↗
27. Evaluation of radiation hardening in ion-irradiated fe based alloys by nanoindentation
28. Effects of neutron irradiation on mechanical properties and microstructures of dispersion and precipitation hardened copper alloys10.1016/S0022-3115(96)00441-2 ↗
29. Fluence dependence of helium ion irradiation effects on the microstructure and mechanical properties of tungsten10.1016/j.nimb.2017.09.002 ↗
30. Evaluation of irradiation hardening of proton irradiated stainless steels by nanoindentation10.1016/j.jnucmat.2013.12.009 ↗
31. Irradiation damage and mechanical properties in fe-au and fe-cu model alloys under helium ion irradiation10.1016/j.apsusc.2019.144383 ↗
32. High temperature solution growth and characterization of cr2alc single crystals10.1016/j.jcrysgro.2013.09.021 ↗
33. Effects of irradiation damage on the structure in cr2alc thin film10.1016/j.nimb.2018.04.014 ↗