Microstructure and hydrogen transport properties of (V90Cr5Al5)90Cu10 alloy membranes
Source abstract
Abstract
Our newly developed V 90Cr 5Al 5 hydrogen permeable alloy has been extended to enhance malleability by Cu alloying. The resulting (V 90Cr 5Al 5) 90Cu 10 consists of bcc-(V) and fcc-(Cu) phases and can be cold rolled into a thin membrane with a thickness of 0.1 mm due to the introduction of the ductile copper phase. After rolling and annealing, (V 90Cr 5Al 5) 90Cu 10 contains finer grains and a higher percentage of special grain boundaries compared to the as-cast case. The rolled/annealed (V 90Cr 5Al 5) 90Cu 10 exhibits a lower hydrogen diffusivity than the as-cast one, but a significantly improved hydrogen permeation flux due to the reduced membrane thickness and the inverse relationship of flux and thickness. Typically, a pronounced high hydrogen flux of ∼72 cc H 2 cm −2min −1 was achieved at a hydrogen pressure difference of 0.6 MPa at 673 K. In comparison with V 90Cr 5Al 5 , Cu alloyed membranes exhibit enhanced resistance against hydrogen embrittlement and enhanced long-term hydrogen permeation stability at 673 K.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Catalysts for Methane Reforming · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Non-Pd BCC alloy membranes for industrial hydrogen separation10.1016/j.memsci.2010.06.068 ↗
2. Production, storage, fuel stations of hydrogen and its utilization in automotive applications-a review10.1016/j.ijhydene.2017.08.063 ↗
3. The production and application of hydrogen in steel industry10.1016/j.ijhydene.2020.12.123 ↗
4. A green hydrogen economy for a renewable energy society10.1016/j.coche.2021.100701 ↗
5. Combined methane and ethanol reforming for pure hydrogen production through Pd-based membranes10.1016/j.ijhydene.2012.11.036 ↗
6. Pd–Ag tubular membrane reactors for methane dry reforming: A reactive method for CO2 consumption and H2 production10.1016/j.memsci.2007.03.058 ↗
7. Effect of annealing process on the hydrogen permeation through Pd–Ru membrane10.1016/j.memsci.2022.120572 ↗
8. Effects of thin film Pd deposition on the hydrogen permeability of Pd60Cu40 wt% alloy membranes10.1016/j.memsci.2015.07.015 ↗
9. Asymmetric layered vanadium membranes for hydrogen separation10.1016/j.memsci.2015.03.048 ↗
10. Effects of Mo alloying on the structure and hydrogen-permeation properties of Nb metal10.1016/j.jallcom.2018.01.076 ↗
11. Quaternary Nb-Hf-Co-Fe alloy with superior hydrogen permeation properties over a wide temperature range
12. Alloying effects on the hydriding properties of vanadium at low hydrogen pressures10.1016/S0925-8388(01)01936-3 ↗
13. Hydrogen diffusion kinetics and structural integrity of superhigh pressure Mg-5 wt%Ni alloys with dendrite interface10.1016/j.jpowsour.2016.04.045 ↗
14. Activation mechanism and dehydrogenation behavior in bulk hypo/hyper-eutectic Mg-Ni alloy10.1016/j.jpowsour.2017.11.034 ↗
15. The effect of Ti on the microstructure, hydrogen absorption and diffusivity of V–Ni alloy membranes10.1016/j.memsci.2012.05.012 ↗
16. Influence of processing conditions on the microstructure and permeability of BCC V–Ni membranes10.1016/j.memsci.2010.07.051 ↗
17. Enhanced high temperature hydrogen permeation characteristics of V–Ni alloy membranes containing a trace amount of yttrium10.1016/j.scriptamat.2016.02.003 ↗
18. Terminal solid solubility of hydrogen in V–Al solid solution10.1016/j.ijrmhm.2011.09.009 ↗
19. Hydrogen permeation and transmission electron microscope observations of V–Al alloys10.1016/S0925-8388(02)01273-2 ↗
20. Substitutional V–Pd alloys for the membranes permeable to hydrogen: hydrogen solubility at 150–400 °C10.1016/j.ijhydene.2014.09.122 ↗
21. Hydrogen transport through the tubular membranes of V-Pd alloys: permeation, diffusion, surface processes and WGS mixture test of membrane assembly10.1016/j.memsci.2017.12.017 ↗
22. V-Cr-Cu dual-phase alloy membranes for hydrogen separation: an excellent combination of ductility, hydrogen permeability and embrittlement resistance10.1016/j.memsci.2016.11.020 ↗
23. Structures and mechanical properties of Nb-Mo-Co(Ru) solid solutions for hydrogen permeation10.1016/j.jallcom.2018.04.235 ↗
24. Hydrogen solubility and permeability of Nb–W–Mo alloy membrane10.1016/j.jallcom.2010.10.133 ↗
25. Ta-W alloy for hydrogen permeable membranes10.2320/matertrans.MA201007 ↗
26. Hydrogen transport through the V-Cr-Al alloys: hydrogen solution, permeation and thermal-stability10.1016/j.seppur.2020.116654 ↗
27. Development of dual-phase V90Fe5Al5/Cu alloys for enhanced malleability and sustainable hydrogen permeability10.1016/j.memsci.2019.117325 ↗
28. Hydrogen transport behavior of as-cast, cold rolled and annealed Nb40Ti30Co30 alloy membranes10.1016/j.memsci.2016.04.055 ↗
29. Effect of overlayer composition on hydrogen permeation of Pd–Cu alloy coated V–15Ni composite membrane10.1016/j.memsci.2006.05.037 ↗
30. Hydrogen permeation of Pd60Cu40 alloy covered V–15Ni composite membrane in mixed gases containing H2S10.1016/j.memsci.2007.10.036 ↗
31. A thermodynamic analysis of the binary alloy systems Cu-Cr, Cu-Nb and Cu-V10.1016/0364-5916(90)90014-Q ↗
32. A density functional theory study of hydrogen occupation in VNiTi alloys used for dense metal membranes10.1016/j.jallcom.2016.01.037 ↗
33. Using density functional theory to study hydrogen diffusion in metals: a brief overview10.1016/j.jallcom.2006.10.136 ↗
34. Degradation of Pd/Nb30Ti35Co35/Pd hydrogen permeable membrane: a numerical description10.1016/j.memsci.2020.117922 ↗