journal article·2023-02

Boosting the strain tolerance of Ta2O5 stabilized ZrO2 TBCs through prefabricated cracks by in-situ reaction

Yu Sun, Xiang Wu, Zhenyu Tan, Li Yang, Yichun Zhou

Publisher page

Abstract

Stress concentration, the most important factor that causes TBC failure, could be ameliorated through proper prefabricated crack design. In this work, Ta 2O 5 stabilized ZrO 2 coatings was successfully prepared by suspension plasma spraying. Through annealing treatment at 1100 °C for 3 h, Zr 6Ta 2O 17 with excellent phase stability over 100 h could be obtained by in-situ chemical reaction. A theoretical 7.2% volume shrinkage will facilitate the thermal growth of vertical cracks which could promote the strain tolerance for the final coatings. But, a thicker and nonuniform thermal growth oxide demonstrates that excessive longitudinal through cracks may lead to a worse interface stress. Structure design with Zr 6Ta 2O 17 /YSZ double-layer TBC could further enhance its thermal oxidation performance. Because of the prefabricated cracks by in-situ reaction, this double-layer TBC exhibits superior thermal cycle stability, over 800 cycles. Its failure behavior is mainly caused by the mismatched stress near the ZTO/YSZ interface. This work provides a direct insight into the failure mechanism of TBCs with prefabricated cracks and paves the way to design of new TBC systems.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
3. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
4. Nanostructured YSZ thermal barrier coatings engineered to counteract sintering effects10.1016/j.msea.2007.07.082 ↗
5. Effect of high-temperature aging on the thermal conductivity of nanocrystalline tetragonal yttria-stabilized zirconia10.1016/j.actamat.2012.06.054 ↗
6. Effect of phase transformations on the fracture toughness of t′yttria-stabilized zirconia10.1016/j.msea.2012.07.095 ↗
7. Preparation of epitaxial yttria-stabilized zirconia with non-quilibrium t′ phase and ferroelastic domain by pulsed laser deposition10.1016/j.apsusc.2020.147790 ↗
8. Lanthanum–titanium–aluminum oxide: a novel thermal barrier coating material for applications at 1300°C10.1016/j.jeurceramsoc.2011.03.036 ↗
9. Sintering resistance of La2Ce2O7, La2Zr2O7, and yttria stabilized zirconia ceramics10.1016/j.ceramint.2020.09.298 ↗
10. Phase stability and thermal conductivity of RE2O3 (RE=La, Nd, Gd, Yb) and Yb2O3 co-doped Y2O3 stabilized ZrO2 ceramics10.1016/j.ceramint.2016.01.138 ↗
11. Plasma-sprayed thermal barrier coatings: new materials, processing issues, and solutions10.1007/s11666-013-9889-8 ↗
12. Low-rare-earth zirconates for potential thermal-barrier-coating applications10.1111/j.1151-2916.2002.tb00574.x ↗
13. Synthesis of nanostructured La2Zr2O7 by a non-alkoxide sol–gel method from gel to crystalline powders10.1016/j.jeurceramsoc.2014.08.032 ↗
14. Preparation and characterization of La2Zr2O7 coating with the addition of Y2O3 by EB-PVD10.1016/j.jallcom.2009.12.022 ↗
15. In situ determination of the HfO2-Ta2O5-Temperature phase diagram up to 3000°C10.1111/jace.16271 ↗
16. Low thermal conductivity Hf6Ta2O17 ceramics fabricated by solvothermal and pressure-less sintering10.1016/j.ceramint.2021.03.091 ↗
17. In-situ investigation of Hf6Ta2O17 anisotropic thermal expansion and topotactic, peritectic transformation10.1016/j.actamat.2018.08.029 ↗
18. Mechanical properties and calcium-magnesium-alumino-silicate (CMAS) corrosion behavior of a promising Hf6Ta2O17 ceramic for thermal barrier coatings10.1016/j.ceramint.2020.06.316 ↗
19. Crystal structure solution for the A6B2O17 (A = Zr, Hf; B = Nb, Ta) superstructure10.1107/S2052520619001963 ↗
20. Phase stability and hot corrosion behavior of ZrO2–Ta2O5 compound in Na2SO4–V2O5 mixtures at elevated temperatures10.1016/j.ceramint.2013.08.062 ↗
21. Enhanced properties of Al-modified EB-PVD 7-YSZ thermal barrier coatings10.1016/j.ceramint.2016.05.210 ↗
22. Sintering resistance of advanced plasma-sprayed thermal barrier coatings with strain-tolerant microstructures10.1016/j.jeurceramsoc.2018.07.013 ↗
23. Thermal cycling failure of the multilayer thermal barrier coatings based on LaMgAl11O19/YSZ10.1016/j.jeurceramsoc.2019.12.039 ↗
24. Effects of Ta2O5 content on mechanical properties and high-temperature performance of Zr6Ta2O17 thermal barrier coatings10.1111/jace.17990 ↗
25. A numerical study of suspension injection in plasma-spraying process10.1007/s11666-013-0030-9 ↗
26. Grafting of organic molecular precursors onto ZrC(100)//t-ZrO2(001) surfaces: when experimental and theoretical studies meet10.1016/j.apsusc.2021.151622 ↗
27. New phases in La2O3-Li2O-Ta2O5 system10.1016/0025-5408(86)90184-4 ↗
28. Study of ZrO2 phase structure and electronic properties10.1080/08927020802101759 ↗
29. Microstructure and identation mechanical properties of YSZ nanostructured coatings obtained by suspension plasma spraying10.1016/j.surfcoat.2012.09.047 ↗
30. Multilayer, multimaterial thermal barrier coating systems: design, synthesis, and performance assessment10.1111/jace.13563 ↗
31. A review of the erosion of thermal barrier coatings10.1088/0022-3727/40/16/R01 ↗
32. Overview on advanced thermal barrier coatings10.1016/j.surfcoat.2010.08.151 ↗
33. Pre-oxidation and TGO growth behavior of an air-plasma-sprayed thermal barrier coating10.1016/j.surfcoat.2008.01.021 ↗
34. TaZr2.75O8 ceramics as a potential thermal barrier coating material for high-temperature applications10.1016/j.matlet.2019.03.102 ↗
35. Experimental visualization of microstructure evolution during suspension plasma spraying of thermal barrier coatings10.1016/j.jeurceramsoc.2018.09.023 ↗
36. Influence of bond coat surface roughness on the structure of axial suspension plasma spray thermal barrier coatings -thermal and lifetime performance10.1016/j.surfcoat.2014.08.067 ↗
37. Liu · Ceram. Int. · 2022 · 48 · 2440210.1016/j.ceramint.2022.05.046 ↗