Tailoring multi-scale hierarchical microstructure parameters to achieve super-high strength and considerable plasticity in a dual-phase Ti-5.2Mo-4.8Al-2.5Zr-1.7Cr alloy
Source abstract
Abstract
In the present study, traditional treatment was designed specially and carried out on a dual-phase Ti-5.2Mo-4.8Al-2.5Zr-1.7Cr alloy, and a multi-scale hierarchical microstructure differed from the ordinary microstructure of titanium alloys was obtained. During the solution-treatment at 900 ℃ for 1 h followed by furnace cooling (FC), air cooling (AC), water cooling (WC) and at 920℃for 1 h followed by WC, three equiaxed microstructures composed of primary equiaxed α phase (α p ) and β phase with different fractions, and a typical bimodal microstructure containing primary α p and acicular secondary α phase (α s) were formed. During the aging-treatment at 550 ℃ for 6 h followed by AC after solution-treatment at 900 ℃ for 1 h followed by WC, a multi-scale hierarchical microstructure composed of equiaxed α p, acicular α s with a thickness of dozens of nanometers, smaller acicular α phase (α s-s) with a thickness of ten nanometers, distributed in the space of two α s, and whisker β phase (β w) in the transformed β (β t) regions, was obtained. Moreover, with the solution temperature increased to 920 ℃, it was deliberately designed that equiaxed α p was more refined, and finer and denser acicular α s-s precipitated in the alloy. Contributing to the equiaxed α p refinement and nano-scale acicular α phases, the hierarchical microstructure exhibited super-high yield strength of 1228 MPa and ultimate tensile strength of 1389 MPa. Meanwhile, the refined equiaxed α p could also offset the negative effect of acicular α phases on plasticity, and the plasticity was maintain at an considerable level of 8%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Crouch · 2017 · 117
2. Attributes, characteristics and application of titanium and its alloys10.1007/s11837-010-0071-1 ↗
3. A low-cost hierarchical nanostructured beta-titanium alloy with high strength10.1038/ncomms11176 ↗
4. Microstructural dependence of strength and ductility in a novel high strength β titanium alloy with Bi-modal structure10.1016/j.msea.2019.138086 ↗
5. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
6. High strength beta titanium alloys: new design approach10.1016/j.msea.2015.01.073 ↗
7. Strengthening mechanisms of nano-grained commercial pure titanium processed by accumulative roll bonding10.1016/j.msea.2017.03.070 ↗
8. Effect of microstructures on ballistic impact property of Ti-6Al-4V targets10.1016/j.msea.2014.04.032 ↗
9. A novel strategy for developing α+ β dual-phase titanium alloys with low Young’s modulus and high yield strength10.1016/j.jmst.2020.11.018 ↗
10. Influence of hot rolling and heat treatment on the microstructural evolution of β20C titanium alloy10.3390/ma10091071 ↗
11. Effect of annealing on the superplastic properties of ultrafine-grained Ti-5Al-5V–5Mo-1Cr-1Fe alloy10.1016/j.msea.2020.140511 ↗
12. Study of mechanical properties and corrosive resistance of ultrafine-grained α-titanium alloy Ti-5Al-2V10.1016/j.jallcom.2017.06.220 ↗
13. Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging10.1016/j.msea.2011.12.102 ↗
14. Strengthening of α+β titanium alloys by thermomechanical processing10.1016/S0921-5093(97)00786-7 ↗
15. Deformation mechanism of fine structure and its quantitative relationship with quasi-static mechanical properties in near β-type Ti-4.5Mo-5.1Al-1.8Zr-1.1Sn-2.5Cr-2.9Zn alloy10.1016/j.pnsc.2021.09.001 ↗
16. Formation of intermediate phases and their influences on the microstructure of high strength near-β titanium alloy10.1016/j.msea.2020.139886 ↗
17. A comparative study of the mechanical properties of high-strength β-titanium alloys10.1016/j.jallcom.2007.03.070 ↗
18. Simultaneous improvement of strength and elongation of laser melting deposited Ti-6Al-4V titanium alloy through three-stage heat treatment10.1016/j.jmatprotec.2022.117607 ↗
19. Fatigue life improvement of TC11 titanium alloy by novel electroshock treatment
20. Strength and ductility optimization of laser additive manufactured metastable β titanium alloy by tuning α phase by post heat treatment10.1016/j.msea.2021.142265 ↗
21. Influence of hot-rolling on the microstructure and mechanical properties of a near β-type Ti-5.2Mo-4.8Al-2.5Zr-1.7Cr alloy10.1016/j.pnsc.2022.08.002 ↗
22. Plastic deformation via hierarchical nano-sized martensitic twinning in the metastable β Ti-24Nb-4Zr-8Sn alloy10.1016/j.actamat.2020.04.021 ↗
23. Construction of caterpillar-like hierarchically structured Co/MnO/CNTs derived from MnO2/ZIF-8@ZIF-67 for electromagnetic wave absorption10.1016/j.carbon.2020.11.016 ↗
24. Hierarchical structure and deformation behavior of a novel multicomponent β titanium alloy with ultrahigh strength10.1016/j.jmst.2021.08.031 ↗
25. Effects of heat treatment and hot deformation on the secondary α phase evolution of TC8 titanium alloy10.1016/j.msea.2014.06.056 ↗
26. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
27. Microstructural tailoring and mechanical properties of a multi-alloyed near β titanium alloy Ti-5321 with various heat treatment10.1016/j.msea.2017.11.029 ↗
28. Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti-5Al-5V–5Mo-3Cr10.1016/j.matdes.2014.04.015 ↗
29. Evolution of the secondary a phase morphologies during isothermal heat treatment in Ti-7333 alloy10.1016/j.jallcom.2013.06.180 ↗
30. Element segregation and α2 formation in primary α of a near-α Ti-alloy10.1016/j.matchar.2020.110327 ↗
31. Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure10.1016/j.scriptamat.2017.11.021 ↗
32. Effect of initial microstructure on the micromechanical behavior of Ti-55531 titanium alloy investigated by in-situ high-energy X-ray diffraction10.1016/j.msea.2019.138806 ↗
33. Role of aging induced α precipitation on the mechanical and tribocorrosive performance of a β Ti-Nb-Ta-O orthopedic alloy
34. Coupled effects of deformation and cooling on the evolution of primary and secondary alpha of two-phase Ti-alloys10.1016/j.msea.2017.10.106 ↗