journal article·2023-02

High strength CuAg foil with a nano-lamellar structure prepared via pulse electrodeposition in an environmental-friendly methanesulfonic acid-based bath

Wonhyo Kong, Taein Park, Kyung-Tae Kim, Yang-Do Kim, Kyu Hwan Lee, Ihho Park, Seunghoe Choe

Publisher page

Abstract

In this study, high strength CuAg foils with nano-lamellar structures were prepared using a pulse electrodeposition method in an environmental-friendly methanesulfonic acid (MSA)-based solution. In an MSA-based bath, the Ag + ion acted as the source for solute atoms and as a brightening agent, which allowed the formation of compact and bright CuAg structures in an additive-free bath. The application of pulse plating led to the formation of a nano-lammellar structure, in which Cu-rich and Ag layers were repeatedly stacked. Because of the contribution of the Ag layer, the as-deposited CuAg foil exhibited a high ultimate tensile strength (927 MPa) even at a low Ag content (2.37 wt%). The strength of the CuAg foil was further improved with annealing at 100–250 °C owing to the stabilization of the phase boundary. Despite a high fraction of the phase boundary, the nanostructure was stably maintained even after annealing at 250 °C for 1 h.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Copper Interconnects and Reliability · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Influence of solidification conditions, thermomechanical processing, and alloying additions on the structure and properties of in situ composite Cu-Ag alloy10.1016/S1359-6462(99)00262-6 ↗
2. Microstructure and strength of wire-drawn Cu-Ag filamentary composites10.1016/S1359-6454(96)00152-8 ↗
3. Microstructure evolution and properties of Cu–Ag microcomposites with different Ag content10.1016/j.msea.2006.07.125 ↗
4. Microstructural and mechanical stability of Cu-6 wt% Ag alloy10.1023/A:1004876806313 ↗
5. A high strength and high electrical conductivity bulk Cu-Ag alloy strengthened with nanotwins10.1016/j.scriptamat.2016.10.022 ↗
6. Precipitation and dissolution of Ag in ageing hypoeutectic alloys10.1016/j.jallcom.2014.10.037 ↗
7. Intragranular nucleation of tetrahedral precipitates and discontinuous precipitation in Cu-5wt% Ag10.1016/j.actamat.2018.10.055 ↗
8. Mechanical properties of Cu/Ag multilayered composites10.1016/S0921-5093(98)00788-6 ↗
9. Microstructural investigation of electrodeposited CuAg-thin films10.1016/S0167-9317(03)00422-2 ↗
10. Structural properties of electrodeposited Cu-Ag alloys10.1016/j.electacta.2017.08.097 ↗
11. Properties of nanocrystalline CuAg foil prepared via electrodeposition10.1016/j.jallcom.2021.160522 ↗
12. A new periodic displacement method applied to electrodeposition of Cu‐Ag alloys10.1149/1.2069237 ↗
13. High-temperature tensile properties of Cu-Ag composites prepared by solution-precipitation of electroformed multilayered alloys10.1007/BF02403831 ↗
14. Electroplating of Cu(Ag) thin films for interconnect applications10.1016/j.mee.2009.07.010 ↗
15. Electrodeposition and microstructure characterization of bimetallic copper-silver films from the methanesulfonic acid baths10.1149/2.0971811jes ↗
16. Electrodeposition of Cu-Ag films in ammonia-based electrolyte10.1016/j.jallcom.2018.10.023 ↗
17. Rapid stress-driven grain coarsening in nanocrystalline Cu at ambient and cryogenic temperatures
18. X-ray diffraction investigation of self-annealing in nanocrystalline copper electrodeposits10.1016/j.scriptamat.2006.05.010 ↗
19. High strength Cu foil without self-annealing prepared by 2M5S-PEG-SPS10.1007/s11814-019-0279-x ↗
20. Grain coarsening inhibited by solute segregation10.1016/S1359-6454(01)00338-X ↗
21. Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: atomistic computer simulations in the Ni–W system10.1016/j.actamat.2007.03.024 ↗
22. Grain-size stabilization in nanocrystalline FeZr alloys10.1016/j.scriptamat.2008.04.045 ↗
23. Paunovic · 2006
24. Tailoring and patterning the grain size of nanocrystalline alloys10.1016/j.actamat.2006.08.032 ↗
25. Synthesis and characterization of electrodeposited nanocrystalline nickel–iron alloys10.1016/S0921-5093(02)00586-5 ↗
26. Some fundamental aspects of levelling and brightening in metal electrodeposition10.1007/BF01024843 ↗
27. The relationship between brightness and structure in electroplated nickel10.1149/1.2427639 ↗
28. Fabrication of Cu-Ag interconnection using electrodeposition: the mechanism of superfilling and the properties of Cu-Ag film10.1149/2.020312jes ↗
29. Depolarization of Cu electrodeposition in the presence of Ag: a cyclic-voltammetry study10.1016/j.electacta.2021.139796 ↗
30. Microstructure evolution of Cu/Ag interface in the Cu–6 wt% Ag filamentary nanocomposite10.1016/j.actamat.2010.10.052 ↗
31. The Hall-Petch relation in submicro-grained Al-1.5% Mg alloy10.1016/0956-716X(92)90405-4 ↗
32. The structure and properties of metallic materials with a submicron-grained structure
33. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
34. Hardening by annealing and softening by deformation in nanostructured metals10.1126/science.1124268 ↗
35. Strain-energy-driven abnormal grain growth in copper films on silicon substrates10.1016/S0022-0248(01)01376-8 ↗
36. Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design10.1557/jmr.2013.211 ↗
37. Relationship between grain boundary segregation and grain boundary diffusion in Cu-Ag alloys
38. Grain growth and strain release in nanocrystalline copper10.1063/1.1367401 ↗
39. Self-annealing characterization of electroplated copper films10.1016/S0167-9317(99)00314-7 ↗
40. Is discontinuous (cellular) precipitation an effect of a structural transformation in the migrating phase boundary?10.1016/0001-6160(81)90108-5 ↗
41. Gale · 2003