Improving mechanical property of Ti55531 alloy by yttrium dopant
Source abstract
Abstract
Obtaining higher mechanical properties, particularly the coexistence of strength and ductility, is always an important issue for high-strength and high-ductile metastable β titanium alloy, such as Ti55531. Rare earth element doping to gain reticulate structure is a possible way to break the strength-ductility trade-off considering the excellent capability of yttrium in improving the properties of titanium alloys and limiting grain growth. In this study, a new strategy was devised for the preparation of Ti55531 alloys with a reticulate structure by introducing yttrium and a tailored spark plasma sintering (SPS) procedure. Compared to the homogeneous structure, the strength of the material with a reticulate structure is prominently improved at the little expense of loss in ductility. Furthermore, the addition of yttrium can significantly increase the precipitation of α phase by affecting the local element concentration. It is hoped that this study can provide important inspiration for improving the mechanical properties of powder metallurgy fabricated titanium alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Constitutive modeling of dynamic flow behavior of Ti-5553 alloy10.1016/j.jallcom.2019.02.101 ↗
2. Graded hierarchical microstructure and mechanical property of electron beam melted Ti–5Al–5Mo–5V–3Cr–1Zr10.1016/j.msea.2021.141914 ↗
3. Design of high strength and wear-resistance β-Ti alloy via oxygen-charging10.1016/j.actamat.2022.117686 ↗
4. State of the art in beta titanium alloys for airframe applications10.1007/s11837-015-1442-4 ↗
5. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
6. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
7. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
8. New microstructure design for commercially pure titanium with outstanding mechanical properties by mechanical milling and hot roll sintering10.2320/matertrans.MB200913 ↗
9. Heterogeneous evolution of lattice defects leading to high strength and high ductility in harmonic structure materials through atomic and dislocation simulations10.1016/j.actamat.2022.117679 ↗
10. Three-dimensionally gradient and periodic harmonic structure for high performance advanced structural materials10.2320/matertrans.MH201509 ↗
11. A novel heterogeneous network structure titanium matrix composite with a combination of strength and ductility10.1016/j.msea.2022.142954 ↗
12. Effect of mechanical milling on the harmonic structure development during spark plasma sintering of Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe β-metastable titanium alloy (β-Cez alloy)10.1016/j.jallcom.2020.158483 ↗
13. Cyclic shear behavior of conventional and harmonic structure-designed Ti-25Nb-25Zr β-titanium alloy: back-stress hardening and twinning inhibition10.1016/j.scriptamat.2017.05.033 ↗
14. Evolution behavior of abnormal β grain region in Ti-5Al-5Mo-5V–1Cr-1Fe titanium alloy under the electropulsing treatment10.1016/j.matchar.2021.111504 ↗
15. Reactive spark plasma sintering (SPS) of nitride reinforced titanium alloy composites10.1016/j.jallcom.2014.08.049 ↗
16. Effect of ageing on the properties of the W-containing IRIS-TiAl alloy10.1016/j.actamat.2020.07.061 ↗
17. Mechanical behavior and microstructure control of the low-cost titanium-oxygen alloy prepared by ball milling and spark plasma sintering10.1016/j.jallcom.2021.161349 ↗
18. A novel Bimodal Milling (BiM) approach to achieve harmonic structured SUS316L with controlled microstructure and outstanding mechanical performance10.1016/j.powtec.2022.117188 ↗
19. Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach10.1016/j.jmrt.2022.01.098 ↗
20. Refining prior-β grains of Ti–6Al–4V alloy through yttrium addition10.1016/j.jallcom.2020.155733 ↗
21. Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys10.1016/j.jmst.2020.11.045 ↗
22. Microstructure and mechanical characteristics of bulk polycrystalline Ni consolidated from blends of powders with different particle size10.1016/j.msea.2009.09.050 ↗
23. Yttrium segregation induced grain growth inhibition during recrystallisation in binary titanium alloys10.1016/j.msea.2020.139137 ↗
24. Impacts of yttrium on microstructure and tensile properties of biomedical β Ti-Nb-Zr fabricated by metal injection molding10.1016/j.msea.2020.139816 ↗
25. A β-solidifying TiAl alloy reinforced with ultra-fine Y-rich precipitates10.1016/j.scriptamat.2020.10.010 ↗
26. Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti–2.25Mo–1.5Fe alloy10.1016/j.scriptamat.2012.06.009 ↗
27. Improvement in fatigue strength while keeping low Young's modulus of a β-type titanium alloy through yttrium oxide dispersion10.1016/j.msec.2011.12.007 ↗
28. Influence of transformation temperature on microtexture formation associated with α precipitation at β grain boundaries in a β metastable titanium alloy10.1016/j.actamat.2013.03.007 ↗
29. Crystallographic and morphological relationships between β phase and the Widmanstätten and allotriomorphic α phase at special β grain boundaries in an α/β titanium alloy10.1016/j.actamat.2007.08.029 ↗
30. Okamoto · 2000
31. Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastable β titanium alloy10.1016/j.jmst.2021.01.090 ↗
32. Characteristics of a hot-rolled near β titanium alloy Ti-733310.1016/j.matchar.2017.04.031 ↗
33. Enhanced mechanical properties of Ti-5Al-5Mo-5V–3Cr-1Zr by bimodal lamellar precipitate microstructures via two-step aging10.1016/j.msea.2021.142117 ↗
34. Tuning the morphology of Ti–5Al–5Mo–5V–3Cr–1Zr alloy: From brittle to ductile fracture10.1016/j.msea.2019.138487 ↗
35. Microstructural evolution, mechanical properties and fracture toughness of near β titanium alloy during different solution plus aging heat treatments10.1016/j.jallcom.2019.07.134 ↗
36. Texture heterogeneities induced by subtransus processing of near α titanium alloys10.1016/j.actamat.2008.04.065 ↗