journal article·2022-12

Effects of temperature and loading direction on deformation mechanism of Ti-10at%Al alloy subjected to rolling and high speed compression

Shuwei Yu, Xinglong An, Song Ni, Min Song

Publisher page

Abstract

In this paper, Ti-10at%Al alloy samples were subjected to rolling and high speed compression under different temperatures and along different loading directions (the transverse direction (TD) and normal direction (ND) of the pre-rolled samples), to explore the effects of temperature and loading direction on the deformation mechanisms. 10 1 ̅ 2 and 11 2 ̅ 1 twins were activated in all these deformed specimens. 11 2 ̅ 1 twins prevailed in both the room temperature rolled and liquid nitrogen rolled specimens but were severely inhibited during hot rolling, while 10 1 ̅ 2 twins did not show obvious change with the temperature. Planar slip of dislocations occurred during room temperature rolling and liquid nitrogen rolling, while cross slip occurred during hot rolling. The change of dislocation behaviors at different temperatures may be caused by the variation in stacking fault energy as an effect of temperature. Moreover, the number of twins in the deformed samples along TD was always higher than that along ND both under rolling and high speed compression. When loaded along TD, most of the grains were with or close to the orientations of< 2 1 ̅ 1 ̅ 0 > and< 10 1 ̅ 0 > , which were favorable for the activation of 10 1 ̅ 2 and 11 2 ̅ 1 twins. Therefore twinning played a significant role when loaded along TD, while dislocation slip dominated the deformation when loaded along ND. The hardness increased after deformation under different conditions, and the hardness of specimens after rolling or compression along ND was generally higher than that along TD due to the reason that most of the grains were in the hard< 0001 > orientation when loaded along ND, activation of dislocations on pyramidal planes with high critical resolved shear stress was required.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Titanium alloys and processing for high speed aircraft10.1016/S0921-5093(97)00818-6 ↗
2. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
3. Gerhard · 1994
4. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
5. Role of microstructure on twin nucleation and growth in HCP titanium: A statistical study10.1016/j.actamat.2018.01.041 ↗
6. Grain size effect on deformation mechanisms and mechanical properties of titanium10.1016/j.msea.2019.138721 ↗
7. Experimental evaluation of critical resolved shear stress for the first-order pyramidal c + a slip in commercially pure Ti by micropillar compression method10.1016/j.actamat.2020.06.043 ↗
8. Analysis of twinning behavior of pure Ti compressed at different strain rates by Schmid factor10.1016/j.msea.2013.03.031 ↗
9. Role of microstructure on twin nucleation and growth in HCP titanium: a statistical study10.1016/j.actamat.2018.01.041 ↗
10. Influence of initial textures on microstructure and mechanical properties of commercially pure TA2 titanium sheet pre-strained by cryorolling10.1007/s12540-020-00878-4 ↗
11. Effects of strain rates on deformation twinning behavior in alpha-titanium10.1016/j.matchar.2015.05.016 ↗
12. Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr10.1016/j.actamat.2015.01.037 ↗
13. Twinning dislocations on and planes in hexagonal close-packed crystals10.1016/j.actamat.2011.03.024 ↗
14. Twinning and de-twinning via glide and climb of twinning dislocations along serrated coherent twin boundaries in hexagonal-close-packed metals10.1080/21663831.2013.779601 ↗
15. Deformation twinning in hexagonal materials10.1557/mrs.2016.64 ↗
16. Temperature effect on stacking fault energy and deformation mechanisms in titanium and titanium-aluminium alloy10.1038/s41598-020-60013-6 ↗
17. The effect of aluminium on twinning in binary alpha-titanium10.1016/j.actamat.2015.09.048 ↗
18. Effects of strain rate and strain on microstructural evolution and mechanical properties of a Ti-10 at%Al alloy10.1016/j.matchar.2021.111314 ↗
19. Short-range order (SRO) and its effect on the primary creep behavior of a Ti-6wt%Al alloy10.1016/S0921-5093(01)01045-0 ↗
20. Ordering and the micromechanics of Ti-7Al10.1016/j.msea.2015.09.070 ↗
21. Zhao · Temp. Eff. Stacking Fault Energy Deform. Mech. Titan. Titan. -Alum. Alloy · 2020 · 10 · 3086
22. Strength, Deformation modes and fracture in titanium-aluminum alloys
23. Deformation behavior of HCPTi-Al alloy single crystals10.1007/s11661-002-0153-y ↗
24. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
25. Nucleation of paired twins at grain boundaries in titanium10.1016/j.scriptamat.2010.06.027 ↗
26. Twin interactions in pure ti under high strain rate compression10.1007/s11661-016-3832-9 ↗
27. Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium10.1016/S1359-6462(02)00005-2 ↗
28. Strain hardening of titanium: role of deformation twinning10.1016/S1359-6454(03)00239-8 ↗
29. Work-hardening stages and deformation mechanism maps during tensile deformation of commercially pure titanium10.1016/j.commatsci.2013.03.028 ↗
30. Strain hardening due to deformation twinning in α-titanium: mechanisms10.1007/s11661-006-0171-2 ↗
31. Rate-dependent hardening model for pure titanium considering the effect of deformation twinning10.1016/j.ijmecsci.2015.04.008 ↗
32. Phase reversion-induced nanostructured austenitic alloys: an overview10.1080/10667857.2022.2065621 ↗
33. Probing deformation processes in near-defect free volume in high strength-high ductility nanograined/ultrafine-grained (NG/UFG) metastable austenitic stainess steels10.1016/j.scriptamat.2010.07.041 ↗