Microstructure and electrochemical properties of as-rolled Mg-Hg-Ga anode materials
Source abstract
Abstract
In this work, the effects of Hg and Ga additions on the microstructure and electrochemical properties of as-rolled Mg-Hg-Ga alloys are investigated. It can be concluded that the Mg-Hg-Ga alloys are composed of α-Mg and Mg 5Ga 2 phases. The addition of the Hg element not only facilitates the precipitation of Mg 5Ga 2 phases, but also facilitates the distribution of the Ga element in second phases. During rolling, the main soft mechanism in the Mg-1.5Hg-1.5Ga alloy is dynamic recovery, while that of the Mg-1.5Hg-2.0Ga alloy is dynamic recrystallization. The electrochemical tests reveal that the Mg-1.5Hg-2.0Ga alloy has the best corrosion resistance with the smallest corrosion current density of 0.057 mA cm −2. The Mg-2.0Hg-2.0Ga alloy is discovered to exhibit the most negative discharge potential of − 1.976 V and − 1.967 V (vs. SCE) at current densities of 80 mA cm −2 and 180 mA cm −2, respectively. It can be attributed to the fact that the increasing Hg content greatly increases the proportion of deformed grains as well as the volume fraction of Mg 5Ga 2 phases in the grains, improving the discharge activity of the Mg-2.0Hg-2.0Ga alloy. It also refines the grains of the alloy and forms many anodic dissolution areas, further promoting the discharge activity of the Mg-2.0Hg-2.0Ga alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. The role of Al2Gd cuboids in the discharge performance and electrochemical behaviors of AZ31-Gd anode for Mg-air batteries10.1016/j.energy.2019.116314 ↗
2. Recent advances in air-battery chemistries10.1016/j.mtchem.2019.03.006 ↗
3. Douglas, suppressing corrosion in primary aluminum–air batteries via oil displacement10.1126/science.aat9149 ↗
4. Electrochemical behaviors and discharge properties of Al–Mg–Sn–Ca alloys as anodes for Al-air batteries10.1016/j.jpowsour.2021.229724 ↗
5. Effect of microstructure evolution on the discharge characteristics of Al-Mg-Sn-based anodes for Al-air batteries10.1016/j.jpowsour.2021.230928 ↗
6. Effect of calcium on the electrochemical behaviors and discharge performance of Al-Sn alloy as anodes for Al-air batteries10.1016/j.electacta.2021.137833 ↗
7. Effect of hot rolling on the microstructure and discharge properties of Mg-1.6 wt%Hg-2 wt%Ga alloy anodes10.1016/j.jallcom.2018.05.070 ↗
8. Interface engineering of Co3Fe7-Fe3C heterostructure as an efficient oxygen reduction reaction electrocatalyst for aluminum-air batteries10.1016/j.cej.2020.127124 ↗
9. Enhancement of the discharge performance of AP65 magnesium alloy anodes by hot extrusion10.1016/j.corsci.2013.12.005 ↗
10. Effects of Hg and Ga on microstructures and electrochemical corrosion behaviors of Mg anode alloys10.1016/S1003-6326(11)61568-9 ↗
11. Effect of Gd content on the discharge and electrochemical behaviors of the magnesium alloy AZ31 as an anode for Mg-air battery10.1007/s10853-021-06135-2 ↗
12. A comprehensive review of the development of magnesium anodes for primary batteries10.1039/D1TA01471D ↗
13. Composition optimization and electrochemical properties of Mg-Al-Pb-(Zn) alloys as anodes for seawater activated battery10.1016/j.electacta.2016.02.088 ↗
14. Microstructure and discharge performance of Mg-La alloys as the anodes for primary magnesium-air batteries10.1016/j.jallcom.2022.165803 ↗
15. Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium–air batteries10.1016/j.corsci.2020.108695 ↗
16. Water soluble graphene as electrolyte additive in magnesium-air battery system10.1016/j.jpowsour.2014.11.079 ↗
17. Properties of reduced grapheneoxide for Mg-air battery10.1016/j.jpowsour.2019.05.034 ↗
18. Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries10.1016/j.jpowsour.2019.227201 ↗
19. Influence of heat treatment on the discharge performance of Mg-Al and Mg-Zn alloys as anodes for the Mg-air battery10.1016/j.cej.2021.133797 ↗
20. Enhancement of discharge performance for aqueous Mg-air batteries in 2,6-dihydroxybenzoate-containing electrolyte10.1016/j.cej.2021.132369 ↗
21. The discharge performance of an as-extruded Mg-Zn-La-Ce anode for the primary Mg-air battery10.1016/j.electacta.2021.139763 ↗
22. Effect of extrusion on corrosion properties of Mg-2Ca-χAl (χ=0, 2, 3, 5) alloys10.1016/j.corsci.2017.08.014 ↗
23. Effects of microstructure on the electrochemical discharge behavior of Mg-6 wt%Al-1 wt%Sn alloy as anode for Mg-air primary battery10.1016/j.jallcom.2016.12.172 ↗
24. Discharge and corrosion behaviour of AP65 magnesium anode plates with different rolling reductions10.1039/C7RA10652A ↗
25. Discharge performance of Mg-Al-Pb-La anode for Mg-air battery10.1016/S1003-6326(18)64872-1 ↗
26. Effect of crystallographic orientation on the discharge and corrosion behaviour of AP65 magnesium alloy anodes10.1016/j.corsci.2018.08.003 ↗
27. AZ31 magnesium alloy with ultrafine grains as the anode for Mg-air battery10.1016/j.electacta.2021.138135 ↗
28. Performance of AZ31 alloy as anodes for primary magnesium-air batteries under high current discharge10.2320/matertrans.MT-M2019259 ↗
29. Effects of Al and Sn on microstructure, corrosion behavior and electrochemical performance of Mg-Al-based anodes for magnesium-air batteries10.1016/j.jallcom.2020.157755 ↗
30. Composition optimization and electrochemical properties of Mg-Al-Sn-Mn alloy anode for Mg-air batteries10.1016/j.matdes.2017.10.031 ↗
31. Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of alpha-Mg based Mg-Li alloys for primary Mg-air batteries10.1016/j.jmst.2020.05.067 ↗
32. The role of long-period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg-Zn-Y for the primary Mg-air battery10.1002/er.5595 ↗
33. Revealing the impact of second phase morphology on discharge properties of binary Mg-Ca anodes for primary Mg-air batteries
34. Effects of Hg and Ga on microstructures and electrochemical corrosion behaviors of Mg anode alloys10.1016/S1003-6326(11)61568-9 ↗
35. Electrochemical behaviors and discharge performance of the as-extruded Mg-1.5 wt%Ca alloys as anode for Mg-air battery10.1016/j.jallcom.2019.03.260 ↗
36. Influence of Ga and Hg on microstructure and electrochemical corrosion behavior of Mg alloy anode materials10.1016/S1003-6326(07)60278-7 ↗
37. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
38. Microstructures and electrochemical corrosion properties of Mg–Al–Pb and Mg–Al–Pb–Ce anode materials10.1016/S1003-6326(16)64242-5 ↗
39. Influence of alloying elements Ga and Hg on electrochemical corrosion behavior of Mg solid solution10.5006/1.3586020 ↗
40. The influence of heat treatment on discharge and electrochemical properties of Mg-Gd-Zn magnesium anode with long period stacking ordered structure for Mg-air battery10.1016/j.electacta.2020.137518 ↗
41. Effect of hot rolling and subsequent annealing on electrochemical discharge behavior of AP65 magnesium alloy as anode for seawater activated battery10.1016/j.corsci.2012.06.024 ↗
42. Electrochemical performance of magnesium alloy and its application on the sea water battery10.1016/S1001-0742(09)60045-0 ↗
43. An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing10.1016/j.corsci.2009.03.014 ↗
44. Two-stage double peaks ageing and its effect on stress corrosion cracking susceptibility of Al-Zn-Mg alloy10.1016/j.jmst.2017.05.008 ↗
45. Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution10.1016/j.corsci.2011.09.005 ↗
46. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗
47. Effect of crystal orientation on corrosion behavior of directionally solidified Mg-4wt% Zn alloy10.1016/j.jmst.2017.06.009 ↗
48. Electrochemical behavior of Mg-Al-Zn-In alloy as anode materials in 3.5 wt% NaCl solution10.1016/j.electacta.2017.03.119 ↗
49. Electrochemical investigations on AZ Series magnesium alloys as anode materials in a sodium chloride solution10.1007/s11665-019-04035-w ↗
50. Effect of Ce content on performance of AZ31 magnesium alloy anode in air battery10.1016/j.jallcom.2021.161914 ↗
51. Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries10.1016/j.jpowsour.2018.12.092 ↗
52. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗