journal article·2022-09Open access

Effect of differently oriented interlayer phases on the radiation damage of Inconel-Ni multimetallic layered composite

Shiddartha Paul, Daniel Schwen, Michael P. Short, Anna Erickson, Kasra Momeni

Abstract

Multimetallic layered composites (MMLCs) have shown an excellent potential for application under extreme environments, e.g., accident-tolerant fuel cladding, because of their low oxidation tendency and high corrosion resistance. Interfacial phases or complexions in nanocrystalline materials accelerate the annihilation of defects and enhance the radiation resistance of materials, making MMLCs with engineered interlayer phases compelling to deploy in extreme conditions. However, implementation of MMLCs in full capacity remained a challenge due to a lack of fundamental understanding of the underlying mechanisms governing the characteristics of the interface between the metallic layers. The precise role of interlayer phases in MMLCs and their interaction with defects, specifically under extreme conditions, is still unexplored. Pursuing atomistic simulations for various Inconel-Ni MMLCs model materials, we revealed accelerated defect mobility in interlayers with larger crystalline misorientation and the inverse relationship between the interface sink strength to the misorientation angle. Furthermore, we found a linear relation between interlayer misorientation angle with the density of radiation-induced defects and radiation enhanced diffusion. Finally, our results indicate that radiation-induced material degradation is accelerated by the higher defect formation tendency of MMLCs with a high-angle interlayer interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Achieving exceptional radiation tolerance with crystalline-amorphous nanocrystalline structures10.1016/j.actamat.2019.12.058 ↗
2. Irradiation-induced swelling and hardening in HfNbTaTiZr refractory high-entropy alloy10.1016/j.matlet.2020.127832 ↗
3. N.L. Peterson, S.D. Harkness, Radiation damage in metals, American Society for Metals, Metals Park, OH, 1976.
4. Atomic scale modelling of the primary damage state of irradiated fcc and bcc nanocrystalline metals10.1016/j.jnucmat.2006.02.030 ↗
5. Complexion: a new concept for kinetic engineering in materials science10.1016/j.actamat.2007.07.029 ↗
6. Y. Okada, S. Watanabe, H. Teshima, T. Kido, Y. Kameda, Development of M-MDA as reliable cladding and structural materials, in: Proc. 2017 Int. Congr. Adv. Nucl. Power Plants, Japan, 2017: p. 2573. 〈http://inis.iaea.org/search/search.aspx?orig_q=RN:49033625〉.
7. Nanoindentation measurements of the mechanical properties of zirconium matrix and hydrides in unirradiated pre-hydrided nuclear fuel cladding10.1016/j.jnucmat.2014.04.045 ↗
8. Evolution of irradiation-induced strain in an equiatomic NiFe alloy10.1016/j.scriptamat.2017.06.042 ↗
9. Cladding for high performance fuel10.1016/j.pnucene.2011.10.008 ↗
10. Influence of chemical disorder on energy dissipation and defect evolution in advanced alloys10.1557/jmr.2016.269 ↗
11. Effects of chemical alternation on damage accumulation in concentrated solid-solution alloys10.1038/s41598-017-04541-8 ↗
12. J.C. Hosier, T. DJ, INCONEL ALLOY 617. A NEW HIGH TEMPERATURE ALLOY, (1972).
13. Elevated temperature mechanical properties of Inconel 617 surface oxide using nanoindentation10.1016/j.msea.2020.139539 ↗
14. Assessment of relative contributions from different mechanisms to radiation embrittlement of reactor pressure vessel steels10.1016/S0022-3115(97)00103-7 ↗
15. Wolff · 2004
16. Irradiation damage of single crystal, coarse-grained, and nanograined copper under helium bombardment at 450C10.1557/jmr.2013.283 ↗
17. Void swelling and irradiation creep relationships
18. Direct observation of defect range and evolution in ion-irradiated single crystalline Ni and Ni binary alloys
19. Feasibility study of fuel cladding performance for application in ultra-long cycle fast reactor10.1016/j.jnucmat.2013.04.062 ↗
20. E.S. Pino, A.Y. Abe, C. Giovedi, The quest for safe and reliable fuel cladding materials, (2015).
21. Grain-boundary source/sink behavior for point defects: an atomistic simulation study10.3139/146.110072 ↗
22. Anisotropic radiation-induced segregation in 316L austenitic stainless steel with grain boundary character10.1016/j.actamat.2013.11.060 ↗
23. Radiation damage reduction by grain-boundary biased defect migration in nanocrystalline Cu10.1016/j.actamat.2018.05.071 ↗
24. Evaluations of the performance of multi-metallic layered composite cladding for the light water reactor accident tolerant fuel10.1016/j.jnucmat.2020.152136 ↗
25. J. Moon, S. Kim, J.H. Kim, M.P. Short, C.B. Bahn, Evaluation of Fe-20Cr-2Si Oxidation Resistance in 1200C Steam Environment, in: Proc. Trans. Korean Nucl. Soc. Spring Meet., 2019.
26. Effect of irradiation on ni-inconel/incoloy heterostructures in multimetallic layered composites10.1016/j.jnucmat.2021.152778 ↗
27. A phase-field approach to nonequilibrium phase transformations in elastic solids: via an intermediate phase (melt) allowing for interface stresses10.1039/C6CP00943C ↗
28. Propagating phase interface with intermediate interfacial phase: phase field approach10.1103/PhysRevB.89.184102 ↗
29. Solid--solid transformations via nanoscale intermediate interfacial phase: multiple structures, scale and mechanics effects10.1016/j.actamat.2013.11.051 ↗
30. A phase-field approach to solid-solid phase transformations via intermediate interfacial phases under stress tensor10.1016/j.ijsolstr.2015.05.027 ↗
31. The strong influence of internal stresses on the nucleation of a nanosized, deeply undercooled melt at a solid--solid phase interface10.1021/nl504380c ↗
32. J. Moon, S. Kim, J.H. Kim, M.P. Short, C.B. Bahn, Multi-Metallic Layered Tubing Fabrication for ATF Cladding Application, (2020).
33. Microstructure characteristics of inconel 625 superalloy manufactured by selective laser melting10.1016/j.jmst.2014.09.020 ↗
34. High-temperature thermal expansion of six metallic elements measured by dilatation method and X-ray diffraction10.1007/BF01174717 ↗
35. An Fe-Ni-Cr embedded atom method potential for austenitic and ferritic systems: An Fe-Ni-Cr embedded atom method potential for austenitic and ferritic systems10.1002/jcc.25573 ↗
36. SRIM – The stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
37. Thermodynamic mixing energy and heterogeneous diffusion uncover the mechanisms of radiation damage reduction in single-phase Ni-Fe alloys10.1016/j.actamat.2017.12.064 ↗
38. Modeling the impact of radiation-enhanced diffusion on implanted ion profiles10.1016/j.jnucmat.2018.06.042 ↗
39. Damage accumulation in ion-irradiated Ni-based concentrated solid-solution alloys10.1016/j.actamat.2016.02.048 ↗
40. Efficient annealing of radiation damage near grain boundaries via interstitial emission10.1126/science.1183723 ↗
41. Defect annihilation at grain boundaries in alpha-Fe10.1038/srep01450 ↗
42. Microstructural stability of nanostructured Cu alloys during high-temperature irradiation10.1016/j.scriptamat.2010.07.009 ↗
43. Diffusion on fractal lattices and the fractal Einstein relation10.1088/0305-4470/16/15/003 ↗
44. Preferential diffusion in concentrated solid solution alloys: NiFe, NiCo and NiCoCr10.1016/j.actamat.2017.01.056 ↗
45. Was · 2016
46. A topological definition of a Wigner--Seitz cell and the atomic scattering factor10.1107/S0108767394003740 ↗
47. Atomistic simulation of interaction of collision cascade with different types of grain boundaries in α-Fe10.1016/j.jnucmat.2019.06.021 ↗
48. Radiation-induced damage and evolution of defects in Mo10.1103/PhysRevB.84.104109 ↗
49. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
50. Atomistic simulation of interaction of collision cascade with different types of grain boundaries in α-Fe10.1016/j.jnucmat.2019.06.021 ↗
51. Irradiation deformation near different atomic grain boundaries in α-Zr: An investigation of thermodynamics and kinetics of point defects10.1038/srep23333 ↗
52. On the dominant mechanism of irradiation embrittlement of reactor pressure vessel steels10.1016/0036-9748(83)90280-6 ↗
53. Modeling copper precipitation hardening and embrittlement in a dilute Fe-0.3at%Cu alloy under neutron irradiation10.1016/j.jnucmat.2017.08.042 ↗
54. Effect of Si–Ni–P on the emergence of dislocations loops in Fe–9Cr matrix under neutron irradiation: TEM study and OKMC modelling10.1016/j.jnucmat.2020.152395 ↗
55. Accelerated molecular dynamics: a promising and efficient simulation method for biomolecules10.1063/1.1755656 ↗
56. A theoretical examination of diffusive molecular dynamics10.1137/15M1024858 ↗
57. Volume and grain boundary diffusion of chromium in Ni-base Ni-Cr-Fe alloys10.2320/matertrans.44.40 ↗