The effect of temperature on the physical and mechanical properties of nanostructured boron nitride by spark plasma sintering
Source abstract
Abstract
Hexagonal boron nitride is a very useful substance with extensive applications due to its unique characteristics. In this work, the influence of sintering temperature on densification and mechanical properties was investigated. Nanostructured boron nitride with 2.4 wt% B 2O 3 fabricated by spark plasma sintering (SPS) at various temperatures of 1600, 1700 and 1800 °C under 30 MPa for 10 min. Experimental data demonstrated that relative density, bending strength parallel to the pressing direction and Vickers hardness (H v) increased with sintering temperature, but dielectric constant was insignificantly influenced by sintering temperature. The best sample sintered at 1800 °C had the highest relative density of 97.7%, hardness of 2.01 GPa, bending strength of 88 MPa, and dielectric constant of 5.7.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Powder preparation, properties and industrial applications of hexagonal boron nitride10.5772/53325 ↗
2. Preparation of hexagonal boron nitride by low pressure chemical vapour deposition in the BBr 3+ NH 3+ H 2 system10.1007/BF00274570 ↗
3. Sintering and crystallization of ground hexagonal boron nitride powders10.1007/BF00271224 ↗
4. Boron nitride (BN) and BN composites for high-temperature applications10.1016/j.jeurceramsoc.2007.09.005 ↗
5. Haubner · 2003 · vol. 102
6. Controlled gas exfoliation of boron nitride into few-layered nanosheets10.1002/anie.201605515 ↗
7. Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics10.1016/j.scriptamat.2012.09.012 ↗
8. Combustion synthesis of hexagonal boron–nitride-based ceramics10.1016/S0924-0136(01)01023-8 ↗
9. Hexagonal boron nitride: fabrication, properties and applications10.1016/0955-2219(89)90003-4 ↗
10. Sintering boron nitride by hot pressing and its properties at high temperatures10.1007/BF01285008 ↗
11. The sintering mechanism in spark plasma sintering–proof of the occurrence of spark discharge10.1016/j.scriptamat.2014.03.011 ↗
12. Spark plasma sintering of alumina10.1111/j.1151-2916.2002.tb00381.x ↗
13. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)10.1016/S0921-5093(00)00773-5 ↗
14. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
15. Densification mechanisms in spark plasma sintering of nanocrystalline ceramics10.1016/j.msea.2006.07.092 ↗
16. Influence of the current flow on the SPS sintering of a Ni powder10.1016/j.jallcom.2010.08.077 ↗
17. Pressure-induced preferential grain growth, texture development and anisotropic properties of hot pressed hexagonal boron nitride ceramics10.1016/j.scriptamat.2011.08.025 ↗
18. Microstructural aspects of the hot-pressed hexagonal boron nitride ceramics with limited content of boron oxide
19. An investigation of the mechanical properties and fracture characteristic of hot-pressed boron nitride ceramics
20. Correlation between microstructure and electrical resistivity of hexagonal boron nitride ceramics10.1016/j.jeurceramsoc.2012.11.024 ↗
21. Investigation of structural and magnetic properties of polycrystalline Ni0. 50Zn0. 50− xMgxFe2O4 spinel ferrites10.1016/j.matchemphys.2009.11.040 ↗
22. Stability of intergranular phases in hot-pressed Si3N4 studied with mechanical spectroscopy and in-situ high-temperature XRD10.1016/S0955-2219(01)00511-8 ↗