journal article·2022-08

3-Aminobenzeneboronic acid self-assembled monolayer-modified ITO for efficient and stable OLED devices

Jianguo Deng, Die Hu, Zizhao Zhang, Beibei Zong, Xiangxin Meng, Qing Sun, Bo Shen, Bonan Kang, S. Ravi P. Silva

Publisher page

Abstract

Interface modification of indium tin oxide (ITO) is a hot research topic to obtain highly efficient and stable organic light-emitting diodes (OLEDs), and the key point is to improve the hole injection efficiency between the electrode and organic layer. In this study, we demonstrate an optimization strategy based on the use of 3-aminobenzeneboronic acid (3ABBA) for modifying ITO at the anode interface. The protonation reaction of boronic acid groups with oxides and hydroxyl groups forms a self-assembled monolayer (SAM). Since the ionization potential (IP) of 3ABBA-SAM is 5.44 eV, the hole injection barrier at the interface is minimized. Compared with a control device using PEDOT:PSS, the synergistic effects of the optimized 3ABBA-SAM significantly improves the maximum power efficiency (PEmax of 8.52 lm W−1) and maximum current efficiency (CEmax of 10.45 cd A−1) of the device, and the turn-on voltage is reduced by 0.2 V. In addition, effective interface modification reduces the hydrophilicity of the device and provides support for the stability of the OLED in the ambient environment. Therefore, we believe that a simple 3ABBA-SAM interface modification project can promote the development of high-performance and low-cost OLEDs. •The ITO interface modified by 3-Aminobenzeneboronic acid is reported for the first time.•The self-assembled monolayer reduces the hole injection barrier and promotes.•Compared with PEDOT:PSS as hole injection layer, the device shows better performance and lower cost.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · ZnO doping and properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Organic light-emitting diodes: pushing toward the limits and beyond
2. The role of host–guest interactions in organic emitters employing MR-TADF10.1038/s41566-021-00870-3 ↗
3. Ultra-deep-blue aggregation-induced delayed fluorescence emitters: achieving nearly 16% EQE in solution-processed nondoped and doped OLEDs with CIEy<0.1
4. Triphenylamine/ benzothiadiazole-based compounds for non-doped orange and red fluorescent OLEDs with high efficiencies and low efficiency roll-off10.1039/D1TC00249J ↗
5. Towards efficient terbium-based solution-processed OLEDs: Hole mobility increase by the ligand design10.1016/j.jallcom.2021.161319 ↗
6. Work function tunning of lithium-doped vanadium oxide for functioning as hole injection layer in organic light-emitting diodes10.1016/j.optmat.2021.111674 ↗
7. Efficiency enhancement in fluorescent deep-blue OLEDs by boosting singlet exciton generation through triplet fusion and charge recombination rate10.1016/j.orgel.2019.03.018 ↗
8. Enhancing color purity and stable efficiency of white organic light diodes by using hole-blocking layer
9. Enhancement in photoelectric properties of ITO films by regulating defects and dopants with supercritical fluid treatment10.1016/j.apsusc.2021.150551 ↗
10. Spatially modulating interfacial properties of transparent conductive oxides: patterning work function with phosphonic acid self-assembled monolayers10.1002/adma.201102321 ↗
11. Cathode interfacial engineering using stearic-acid-mediated polyethylenimine ethoxylated for high-performance solution-processed organic light-emitting diodes10.1016/j.cej.2021.130890 ↗
12. Surface modification of indium tin oxide by plasma treatment: an effective method to improve the efficiency, luminance, and reliability of organic light emitting devices10.1063/1.118575 ↗
13. The effects of argon plasma treatment on ITO properties and the performance of OLED devices10.1016/j.optmat.2021.111400 ↗
14. Built-in field electroabsorption spectroscopy of polymer light-emitting diodes incorporating a doped poly(3,4-ethylene dioxythiophene) hole injection layer10.1063/1.124789 ↗
15. Magnetron-sputtered amorphous V2O5 hole injection layer for high performance quantum dot light-emitting diode10.1016/j.jallcom.2021.160303 ↗
16. Origin of enhanced hole injection in inverted organic devices with electron accepting interlayer10.1002/adfm.201200185 ↗
17. Highly efficient and stable tandem organic light-emitting devices based on HAT-CN/HAT-CN: TAPC/TAPC as a charge generation layer10.1039/C4TC02875A ↗
18. Work function-tunable graphene-polymer composite electrodes for organic light-emitting diodes10.1021/acsaem.0c00580 ↗
19. Multi-scale simulation of plasma generation and film deposition in a circular type DC magnetron sputtering system10.1016/j.tsf.2004.08.038 ↗
20. Using self-assembling dipole molecules to improve hole injection in conjugated polymers10.1002/adfm.200400035 ↗
21. Modification of the surface properties of indium tin oxide with benzylphosphonic acids: a joint experimental and theoretical study10.1002/adma.200900502 ↗
22. Self-assembled monolayer modification of indium tin oxide anode surface for polymer light-emitting diodes with poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene vinylene] for high performance10.1063/1.1942644 ↗
23. Fluorinated alkyl phosphonic acid SAMs replace PEDOT:PSS in polymer semiconductor devices10.1016/j.orgel.2011.12.008 ↗
24. Surface modification of indium tin oxide anodes by self-assembly monolayers: effects on interfacial morphology and charge injection in organic light-emitting diodes10.1016/j.tsf.2006.05.010 ↗
25. Highly efficient hole injection/transport layer-free OLEDs based on self-assembled monolayer modified ITO by solution-process10.1016/j.nanoen.2020.105399 ↗
26. Electrical properties of SAM-modified ITO surface using aromatic small molecules with double bond carboxylic acid groups for OLED applications10.1016/j.apsusc.2014.05.181 ↗
27. Self-assembled electroactive phosphonic acids on ITO: maximizing hole-injection in polymer light-emitting diodes10.1002/adfm.200800033 ↗
28. Interfacial engineering in solution processing of silicon-based hybrid multilayer for high performance thin film encapsulation10.1021/acsami.9b14994 ↗
29. Stability of the interface between indium-tinoxide and poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer lightemitting diodes10.1063/1.1315344 ↗
30. Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway10.1126/science.aaa3145 ↗
31. Electronic structure at the interface between metals and new materials for organic light emitting diodes10.1016/S0039-6028(02)01333-X ↗
32. Constructing all-solution-processed green phosphorescent organic lightemitting diodes based on zinc sulfide QDs as an electron injection layer10.1016/j.jallcom.2021.163481 ↗
33. A carbon-doped tantalum dioxyfluoride as a superior electron transport material for high performance organic optoelectronics10.1016/j.nanoen.2020.104508 ↗
34. Towards reliable charge-mobility benchmark measurements for organic semiconductors10.1016/j.orgel.2014.02.008 ↗
35. Efficient quantum-dot light-emitting diodes with 4, 4, 4-Tris(N-Carbazolyl)-triphenylamine (TcTa) electron-blocking layer10.1109/LED.2015.2398850 ↗
36. f-assembled monolayer modified MoO3/Au/MoO3 multilayer anodes for high performance OLEDs10.1007/s13391-017-6381-5 ↗
37. Pyrenyl substituted 1,8-naphthalimide as a new material for weak efficiency-roll-off red OLEDs: a theoretical and experimental study10.1039/C8NJ01866A ↗
38. Modification of ITO anodes with selfassembled monolayers for enhancing hole injection in OLEDs10.1063/1.5086800 ↗
39. Small-size graphene oxide (GO) as a hole injection layer for high-performance green phosphorescent organic light-emitting diodes10.1039/D1TC02898G ↗
40. Improved efficiency of organic light emitting devices using graphene oxide with optimized thickness as hole injection layer10.1016/j.sse.2018.12.017 ↗