journal article·2022-08

Effect of operation voltage on the practical performance of high-energy-density LiCoO2/artificial graphite pouch cells at various temperatures

Min Chen, Hongwei Yu, Xu-Feng Zang, Pei-Rong Wu, Ying Zou, Xi-Fu Li

Publisher page

Abstract

To achieve wide applications of LiCoO 2-based high-voltage lithium-ion batteries, three questions remain to be answered: how to stabilize the cathode/electrolyte interphase upon cycling, what is the practical performance at the pouch cell level and various temperatures, and why the charge cutoff voltage is limited at 4.4 V. Thus, an ~3 Ah LiCoO 2/artificial graphite pouch cell has been developed, whose performances at different temperatures and voltages have been studied. It is observed that the cell at 4.5 V exhibits ultrahigh area capacity and energy-density, good discharge abilities at high rates and at − 20 °C, and high cyclic stability. Investigation reveals that the bulk structure and interface of LiCoO 2 are stabilized by using LiCoO 2 , which is composed of monocrystalline and polycrystalline powders, and a combination of multiple electrolyte additives. We also find that the real barriers for a commercial application are the inferior high-rate charge ability due to the aggravated electrochemical polarization and poor storage stability at 60 °C caused by the side reactions. Undoubtedly, this work will deepen the understanding of the overall performance of LiCoO 2-based high-energy-density pouch cells and direct further optimization of LiCoO 2.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Bulk Mg-doping and surface polypyrrole-coating enable high-rate and long-life for Ni-rich layered cathodes10.1016/j.cej.2021.128625 ↗
2. A redox couple strategy enables long-cycling Li- and Mn-rich layered oxide cathodes by suppressing oxygen release10.1002/adma.202108543 ↗
3. Layered lithium cobalt oxide cathodes
4. Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries10.1016/j.jpowsour.2020.228062 ↗
5. Enhanced eletrochemical performances of LiCoO2 at high cut-off voltage by introducing LiF additive10.1016/j.ssi.2021.115654 ↗
6. Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries10.1038/s41467-021-24893-0 ↗
7. Fundamentals and challenges of lithium ion batteries at temperatures between −40 and 60 °C
8. Controllable solid electrolyte interphase precursor for stabilizing natural graphite anode in lithium ion batteries10.1016/j.carbon.2019.12.054 ↗
9. Conformal prelithiation nanoshell on LiCoO2 enabling high-energy lithium-ion batteries10.1021/acs.nanolett.0c01413 ↗
10. A journey through layered cathode materials for lithium ion cells–from lithium cobalt oxide to lithium-rich transition metal oxides10.1016/j.jallcom.2021.159239 ↗
11. Pomegranate-like Ti-doped LiNi0.4Mn1.6O4 5 V-class cathode with superior high-voltage cycle and rate performance for Li-ion batteries10.1016/j.ces.2020.116297 ↗
12. Realizing long-term cycling stability and superior rate performance of 4.5 V–LiCoO2 by aluminum doped zinc oxide coating achieved by a simple wet-mixing method10.1016/j.jpowsour.2020.228423 ↗
13. Revealing the correlation between structure evolution and electrochemical performance of high-voltage lithium cobalt oxide10.1016/j.jechem.2020.06.027 ↗
14. Evolution of the morphology, structural and thermal stability of LiCoO2 during overcharge10.1016/j.jechem.2020.06.071 ↗
15. Aging mechanism diagnosis of lithium ion battery by open circuit voltage analysis10.1016/j.electacta.2020.137101 ↗
16. Reduced energy barrier for Li+ diffusion in LiCoO2 via dual doping of Ba and Ga10.1016/j.jpowsour.2021.230067 ↗
17. Stable cycling of LiCoO2 at 4.55 V enabled by combined Mg doping and surface coating of NASICON-type electrolyte
18. An in situ formed surface coating layer enabling LiCoO2 with stable 4.6 V high-voltage cycle performances10.1002/aenm.202001413 ↗
19. Insights into the efficient roles of solid electrolyte interphase derived from vinylene carbonate additive in rechargeable batteries10.1016/j.jelechem.2022.116126 ↗
20. Manganese hexacyanoferrate reinforced by PEDOT coating towards high-rate and long-life sodium-ion battery cathode10.1039/C9TA12376H ↗
21. Cocktail therapy towards high temperature/high voltage lithium metal battery via solvation sheath structure tuning10.1016/j.ensm.2021.04.002 ↗
22. Ethylene carbonate-free electrolytes for Li-ion battery: Study of the solid electrolyte interphases formed on graphite anodes10.1016/j.jpowsour.2020.227804 ↗
23. The performances and degradation mechanisms of a commercial artificial graphite/LiNi0.5Co0.2Mn0.3O2 pouch cell at different cutoff voltages and temperatures10.1016/j.jallcom.2021.159678 ↗
24. Surface-modified lithium cobalt oxide (LiCoO2) with enhanced performance at higher rates through Li-vacancy ordering in the monoclinic phase
25. Study on the effect of Ni and Mn doping on the structural evolution of LiCoO2 under 4.6 V high-voltage cycling10.1016/j.jallcom.2020.155827 ↗
26. Conversion-alloying anode materials for sodium ion batteries10.1002/smll.202101137 ↗
27. Amorphous dual-layer coating: Enabling high Li-ion conductivity of non-sintered garnet-type solid electrolyte
28. One-step integrated comodification to improve the electrochemical performances of high-voltage LiCoO2 for lithium-ion batteries10.1021/acssuschemeng.0c01491 ↗
29. Positive film-forming effect of fluoroethylene carbonate (FEC) on high-voltage cycling with three-electrode LiCoO2/graphite pouch cell10.1016/j.electacta.2018.02.151 ↗
30. Watermelon-inspired Si/C microspheres with hierarchical buffer structures for densely compacted lithium-ion battery anodes10.1002/aenm.201601481 ↗
31. Achieving high volumetric lithium storage capacity in compact carbon materials with controllable nitrogen doping10.1002/adfm.201807441 ↗
32. Improving the interfacial stability between lithium and solid-state electrolyte via dipole-structured lithium layer deposited on graphene oxide
33. Liquid metal welding to suppress Li dendrite by equalized heat distribution
34. Tributyl borate as a novel electrolyte additive to improve high voltage stability of lithium cobalt oxide in carbonate-based electrolyte10.1016/j.electacta.2018.04.193 ↗
35. High performance of low-temperature electrolyte for lithium-ion batteries using mixed additives10.1016/j.cej.2021.129400 ↗
36. Besides the capacitive and diffusion control: Inner-surface controlled bismuth based electrode facilitating potassium-ion energy storage
37. Simultaneous interphase optimizations on the large-area anode and cathode of high-energy-density lithium-ion pouch cells by a multiple additives strategy10.1021/acsami.0c12829 ↗
38. Quantification of PF5 and POF3 from side reactions of LiPF6 in Li-ion batteries10.1149/2.0481813jes ↗
39. Lithium ion batteries (NMC/graphite) cycling at 80 °C: different electrolytes and related degradation mechanism10.1016/j.jpowsour.2017.11.014 ↗
40. Mechanism study of unsaturated tripropargyl phosphate as an efficient electrolyte additive forming multifunctional interphases in lithium ion and lithium metal batteries10.1021/acsami.9b21605 ↗
41. High-efficiency Mo doping stabilized LiNi0.9Co0.1O2 cathode materials for rapid charging and long-life Li-ion batteries10.1016/j.ces.2020.115518 ↗
42. A novel perovskite electron–ion conductive coating to simultaneously enhance cycling stability and rate capability of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion batteries10.1002/smll.202008132 ↗
43. Reversible magnesium metal anode enabled by cooperative solvation/surface engineering in carbonate electrolytes10.1007/s40820-021-00716-1 ↗
44. Advanced liquid electrolytes for rechargeable Li metal batteries10.1002/adfm.201910777 ↗
45. Dendrite-free zinc anode enabled by zinc-chelating chemistry10.1016/j.ensm.2021.06.026 ↗
46. An approach through steam to form sulfur nanoparticles for lithium sulfur batteries10.1016/j.elecom.2021.107010 ↗
47. Bismuthene from sonoelectrochemistry as a superior anode for potassium-ion batteries10.1039/C9TA11000C ↗
48. A unique structural highly compacted binder-free silicon-based anode with high electronic conductivity for high-performance lithium-ion batteries10.1002/sstr.202100174 ↗
49. A novel tin-bonded silicon anode for lithium-ion batteries10.1021/acsami.1c13547 ↗
50. Hybrid design of bulk-Na metal anode to minimize cycle-induced interface deterioration of solid Na metal battery10.1002/aenm.202102579 ↗
51. Mechanism of stability enhancement for adiponitrile high voltage electrolyte system referring to addition of fluoroethylene carbonate10.3389/fchem.2020.588389 ↗
52. Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives10.1016/j.cej.2021.128422 ↗
53. New lithium salt forms interphases suppressing both Li dendrite and polysulfide shuttling10.1002/aenm.201903937 ↗
54. Lithium-conductive LiNbO3 coated high-voltage LiNi0.5Co0.2Mn0.3O2 cathode with enhanced rate and cyclability10.1016/j.gee.2020.09.011 ↗