journal article·2022-04

Synthesis and magnetic properties of Sb added MnBi magnets for applications at sub-zero temperatures

Cheoljun Bae, Gyutae Lee, Min Kyu Kang, Hansol Lee, Ki Woong Moon, Jongryoul Kim

Publisher page

Abstract

MnBi-LTP bulk magnets containing substitutional Sb element were fabricated using gas-atomizing process, surfactant-assisted wet magnetic compaction process, and thermal compaction process. Magnetic properties and microstructures were investigated according to the processing parameters. It was found that substitutional Sb element effectively refined the grain size of gas-atomized powders. The conventional ball milling process was able to pulverize these powders into fine particles with a single crystalline structure and minimize their phase decomposition, resulting in a (BH) max of 11.0 MGOe. By analyzing the effects of the compaction pressure on the density and magnetic alignment during the surfactant-assisted wet compaction process, Mn 54Bi 45.9Sb 0.1 bulk magnet with H c of 10.0 kOe at room temperature and temperature coefficient H c of 0.68%/K was successfully fabricated. Furthermore, effects of Sb element on the temperature dependency of H c in the bulk magnet were discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic and transport properties of perovskites and related materials · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. New permanent magnets; manganese compounds10.1088/0953-8984/26/6/064211 ↗
2. Relation between solidification microstructure and coercivity in MnAl permanent-magnet alloys10.1016/j.intermet.2018.02.011 ↗
3. Permanent magnets: plugging the gap10.1016/j.scriptamat.2012.04.036 ↗
4. Magnetic transitions and structural changes in hexagonal manganese compounds10.1088/0370-1301/67/4/302 ↗
5. Optimizing composition in MnBi permanent magnet alloys10.1016/j.actamat.2019.10.003 ↗
6. On the synthesis and microstructure analysis of high performance MnBi10.1063/1.4971759 ↗
7. Magnetic properties of the MnBi intermetallic compound10.1063/1.1405434 ↗
8. Fabrication of Mn-Bi nanoparticles by high energy ball milling10.2320/matertrans.MA201577 ↗
9. Effect of ball milling and heat treatment process on MnBi powders magnetic properties10.1016/j.jallcom.2016.04.097 ↗
10. Influence of jet milling process parameters on particle size, phase formation and magnetic properties of MnBi alloy10.1016/j.jallcom.2014.12.202 ↗
11. Characterization of magnetic properties of low-temperature phase (LTP) synthesized by surfactant-assisted cryo-milling process in Mn-Bi binary system
12. Unique high-temperature performance of highly condensed MnBi permanent magnets10.1016/j.scriptamat.2015.06.003 ↗
13. Processing of magnetically anisotropic MnBi particles by surfactant assisted ball milling10.1016/j.jmmm.2016.10.141 ↗
14. Low-temperature MnBi alloys: electronic and magnetic properties, constitution, morphology and fabrication (Review article)10.1063/10.0000360 ↗
15. Effect of composition and heat treatment on MnBi magnetic materials10.1016/j.actamat.2014.07.034 ↗
16. Effect of Sb substitution on crystal structure, texture and hard magnetic properties of melt-spun MnBi alloys10.1016/j.jallcom.2019.03.407 ↗
17. Regulating the performance of MnBi magnetic materials by Sb doping: DFT calculations and experiments10.1007/s11664-020-08228-1 ↗
18. Developing rare earth permanent magnet alloys for gas atomization10.1088/0022-3727/29/9/022 ↗
19. Novel cooling rate correlations in molten metal gas atomization10.1007/s11663-019-01508-0 ↗
20. Anisotropic nanocrystalline MnBi with high coercivity at high temperature10.1063/1.3630001 ↗
21. Preparation of highly pure α-MnBi phase via melt-spinning10.1063/1.5006491 ↗
22. Magnetic properties of the low-temperature phase of MnBi10.1063/1.1450829 ↗
23. Synthesis and magnetic properties of MnBi(LTP) magnets with high-energy product10.1109/TMAG.2014.2329555 ↗
24. Effect of Sb substitution on structural and magnetic properties of MnBi based alloys10.1016/j.physb.2018.10.008 ↗
25. Simulation-aided development of magnetic-aligned compaction process with pulsed magnetic field10.1016/j.powtec.2018.01.035 ↗
26. 3-D particulate modeling for simulation of compaction in magnetic field10.1109/20.877726 ↗
27. The Stoner–Wohlfarth model of ferromagnetism10.1088/0143-0807/29/3/008 ↗
28. High-coercivity hot-deformed Nd–Fe–B permanent magnets processed by Nd–Cu eutectic diffusion under expansion constraint10.1016/j.scriptamat.2014.03.002 ↗
29. Anisotropic fully dense MnBi permanent magnet with high energy product and high coercivity at elevated temperatures10.1088/0022-3727/46/6/062001 ↗
30. Temperature-dependent first-order reversal curve measurements on unusually hard magnetic low-temperature phase of MnBi10.1103/PhysRevB.95.024413 ↗
31. Temperature dependences of structure and coercivity for melt-spun MnBi compound10.1016/j.jmmm.2012.10.046 ↗
32. Temperature dependence of coercivity in MnBi10.1063/1.352668 ↗