High-temperature Bi2Te3 thermoelectric generator fabricated using Cu nanoparticle paste bonding
Source abstract
Abstract
Abstract For the successful commercialization of Bi2Te3-based thermoelectric generator (TEG) devices, not only highly efficient TE materials, but also reliable bonding materials with high thermal stability are essential. In this study, we investigated the application of Cu nanoparticle paste (CNP) bonding for increasing the operating temperature of Bi2Te3-based TEG devices. Six-chip TEG devices were fabricated by joining surface-metalized Bi2Te3-based TE chips and Cu electrodes by CNP bonding. The optimal bonding was achieved when spark plasma sintering was carried out at 310–320 °C and 15 MPa. The 6-chip Bi2Te3-based TEG devices showed a maximum output power of 50–60 mW at the hot-side temperature of 400 °C ( ∆ T = 380 °C) and maintained almost the same output power after five thermal cycles. The scanning electron microscopy images of the thermally cycled electrodes further confirmed the robustness of the Cu nanoparticle joints. This work provides an effective method for joining TE chips and Cu electrodes for high-temperature TEG devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Thermoelectric generators: a review of applications10.1016/j.enconman.2017.02.070 ↗
2. Automotive exhaust thermoelectric generators: current status, challenges, and future prospects10.1016/j.enconman.2019.05.087 ↗
3. Flexible thermoelectric materials and device optimization for wearable energy harvesting10.1039/C5TC01644D ↗
4. Current progress and future challenges in thermoelectric power generation: from materials to devices10.1016/j.actamat.2014.12.042 ↗
5. Key issues in development of thermoelectric power generators: high figure-of-merit materials and their highly conducting interfaces with metallic interconnects10.1016/j.enconman.2016.01.065 ↗
6. Enhanced thermo-electric properties of Bi2(Te1−xSex)3-based compounds as n-type legs for low-temperature power generation10.1039/c2jm34608g ↗
7. Studies on the Bi2Te3-Bi2Se3-Bi2S3 system for mid-temperature thermoelectric energy conversion10.1039/C2EE23549H ↗
8. Point defect engineering of high-performance bismuth-telluride-based thermoelectric materials10.1002/adfm.201400474 ↗
9. Enhanced figure of merit in antimony telluride thermoelectric materials by In-Ag co-alloying for mid-temperature power generation10.1016/j.actamat.2014.11.023 ↗
10. Attaining high mid-temperature performance in (Bi,Sb)2Te3 thermoelectric materials via synergistic optimization10.1038/am.2016.134 ↗
11. Thermoelectric performance enhancement in n-type Bi2(TeSe)3 alloys owing to nanoscale inhomogeneity combined with a spark plasma-textured microstructure10.1038/am.2016.67 ↗
12. Enhanced thermoelectric performance of n-type bismuth-telluride-based alloys via In alloying and hot deformation for mid-temperature power generation
13. Interfacial reactions in thermoelectric modules10.1080/21663831.2018.1436092 ↗
14. Interfacial reactions between n- and p-type thermoelectric materials and SAC305 solders10.1016/j.jallcom.2013.05.129 ↗
15. Evaluation of diffusion barrier between lead-free solder systems and thermoelectric materials10.1007/s11664-011-1740-8 ↗
16. Thermoelectic phenomena, materials, and applications10.1146/annurev-matsci-062910-100453 ↗
17. Atomic study on copper-copper bonding using nanoparticles10.1115/1.4046164 ↗
18. Investigation of the melting point depression of copper nanoparticles10.1088/1757-899X/903/1/012002 ↗
19. Size effect on the melting temperature of gold particles10.1103/PhysRevA.13.2287 ↗
20. Size-, shape-, and dimensionality-dependent melting temperature of nanocrystals10.1021/jp900314q ↗
21. Nanocopper based solder-free electronic assembly10.1007/s11664-014-3478-6 ↗
22. Surface effect induced Cu-Cu bonding by Cu nanosolder paste10.1016/j.matlet.2016.08.085 ↗
23. Low-temperature and low-pressure Cu-Cu bonding by highly sinterable Cu nanoparticle paste10.1186/s11671-017-2037-5 ↗
24. Bonding process of Cu/Cu joint using Cu nanoparticle paste
25. Influence of joining conditions on bonding strength of joints: efficacy of low-temperature bonding using Cu nanoparticle paste10.1007/s11664-013-2583-2 ↗
26. Highly conductive Cu-Cu joint formation by low-temperature sintering of formic acid-treated Cu nanoparticles10.1021/acsami.6b10280 ↗
27. Bonding strength of Cu sinter die-bonding paste on Ni, Cu, Ag, and Au surfaces under pressureless bonding process10.5104/jiepeng.13.E19-017-1 ↗
28. J. Kim, B. Lee, J.M. Koo, C.L. Gan, Copper nanoparticle paste on different metallic substrates for low temperature bonded interconnection. 2017 IEEE 19th Electronics Packaging Technology Conference, 2017.10.1109/EPTC.2017.8277556 ↗
29. Enhanced copper micro/nano-particle mixed paste sintered at low temperature for 3D interconnects10.1063/1.4954966 ↗
30. A.A. Zinn, R.M. Stoltenberg, J. Chang, Y.L. Tseng, S.M. Clark, D.A. Cullen, A novel nanocopper-based advanced packaging material. 2016 IEEE 18th Electronics Packaging Technology Conference, 2016.10.1109/EPTC.2016.7887894 ↗
31. Reliablity of Cu nanoparticle joint for high temperature power electronics10.1016/j.microrel.2014.07.113 ↗
32. Thermal cycle reliability of Cu-nanoparticle joint10.1016/j.microrel.2015.07.039 ↗
33. B.H. Lee, M.Z. Ng, A.A. Zinn, C.L. Gan, Application of copper nanoparticle as die attachment for high power LED. 2015 IEEE 17th Electronics Packaging Technology Conference, 2015.10.1109/EPTC.2015.7412383 ↗
34. Effects of phenolic resin addition on the electrical conductivity and mechanical strength of nano-copper paste formed Cu-Cu joints10.1007/s11664-017-5669-4 ↗
35. Low resistance Ohmic contacts to Bi2Te3 using Ni and Co metallization10.1149/1.3385154 ↗
36. Joining of thermoelectric material with metallic electrode using spark plasma sintering (SPS) technique10.1016/j.matpr.2017.12.274 ↗
37. Understanding of the contact of nanostructured thermoelectric n-type Bi2Te2.7Se0.3 legs for power generation applications10.1039/c3ta13456c ↗
38. Enhanced interfacial adhesion and thermal stability in bismuth telluride/nickel/copper multilayer films with low electrical contact resistance10.1002/admi.201801279 ↗
39. Method for evaluating interfacial resistance of thermoelectric devices using I-V measurement10.1016/j.measurement.2018.07.030 ↗