Hydrogen absorption performance and mechanism of low-temperature activated Ti-Co-Ce bulk getter
Source abstract
Abstract
Abstract In this paper, a new type of non-evaporable low-temperature activated Ti-Co-Ce bulk getter was prepared. The phase structure, morphology and composition of this getter were studied by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) techniques, respectively. Under the activation condition of 350 °C for 30 min, its hydrogen absorption performance at room temperature was measured through the constant pressure method. The initial hydrogen pumping speed and cumulative absorption capacity within 2 h of Ti80Co15Ce5 (in the following, all alloy compositions, unless otherwise stated, are composition by weight) getter are 2700 ml/s·g and 4000 Pa·ml/g, respectively, which are more than twice those of Zr80.8Co14.2Ce5 (Zr-Co-Ce) and even greater than those of Zr70V24.6Fe5.4 (Zr-V-Fe) under the same preparation, activation and measurement conditions. XRD analysis shows that Ti-Co-Ce getter is mainly composed of (α-Ti) solid solution and Ti2Co intermetallic compound two phases. (α-Ti) instead of Ti2Co plays a more important role in hydrogen absorption. The hydrogen absorption performance of Ti-Co (Ti70.9Co29.1) getter even without rare earth addition is superior to Zr-Co-Ce, single Ti2Co or α-Ti phase. Measured by the constant volume method, the saturated hydrogen absorption capacity of 0.6 g Ti80Co15Ce5 is 143.6 Torr·L or 15.5 mg H2, higher than that of Zr-Co-Ce, intermetallic compounds Zr3Co and Ti2Co.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Magnetic Properties of Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Nitriding reactions with a Zr-Mn-Fe metal getter10.1016/S0925-8388(01)01499-2 ↗
2. Effect of milling and adding yttrium on sorption characteristics of Zr-Co based nanostructure chemical getter
3. Changes in phase composition of Zr-Fe-V getter after hydriding and vacuum dehydriding cycles10.1016/j.jallcom.2009.11.147 ↗
4. Deposition and in-situ characterization of Ti-Zr-V alloy thin films annealed at different temperatures under ultra-high vacuum conditions10.1016/j.jallcom.2015.08.040 ↗
5. Activation characterization of the Ti-Zr-V getter films deposited by magnetron sputtering10.1016/j.apsusc.2020.147059 ↗
6. United States Patent, 4312669, non-evaporable ternary gettering alloy and method of use for the sorption of water, water vapor and other gases, 1982.
7. Assessment of Zr-V-Fe getter alloy for gas-gap heat switches10.1016/S0925-8388(01)01522-5 ↗
8. Obtention of pressures in the 10−14 torr range by means of a Zr-V-Fe non-evaporable getter10.1016/0042-207X(93)90084-N ↗
9. Hydrogen intake capacity of ZrVFe alloy bulk getters10.1016/S0042-207X(97)00116-4 ↗
10. United States Patent, 5961750, Nonevaporable getter alloys, 1999.
11. Hydrogen-induced changes in crystal structure and magnetic properties of the Zr3MOx (M ¼ Fe, Co) phases10.1016/j.jallcom.2004.05.064 ↗
12. Preparation and sorption characteristics of Zr-Co-RE getter films10.1016/j.jallcom.2012.01.030 ↗
13. The initial stages of the reaction be- tween ZrCo and hydrogen studied by hot-stage microscopy10.1016/S0925-8388(97)00557-4 ↗
14. ASTM International, Standard practice for determining pumping speed, sorption capacity, and gas content of nonevaporable getters in the molecular flow region, Designation: F 798–97.
15. https://www.crct.polymtl.ca/fact/documentation/SGTE2017/SGTE2017_Figs.htm.
16. Effect of rare earth elements on sorption characteristics of nanostructured Zr–Co sintered porous getters10.1016/j.vacuum.2014.09.008 ↗
17. Activation of Zr-Co-rare earth getter films: an XPS study10.1016/j.apsusc.2010.04.006 ↗
18. https://crystdb.nims.go.jp/crystdb/search-materials.
19. Synthesis of novel compounds by hydrogen combustion10.1016/S0925-8388(96)03071-X ↗
20. Metal oxides as catalysts for improved hydrogen sorption in nanocrystalline Mg-based materials10.1016/S0925-8388(00)01284-6 ↗
21. Influence of impurities on the milling process of MgH210.1016/j.jallcom.2006.08.132 ↗
22. Hydrogen absorption properties of a mechanically milled Mg-50 wt% LaNi5 composite
23. Reversible ammonia-based and liquid organic hydrogen carriers for high-density hydrogen storage: recent progress10.1016/j.ijhydene.2019.01.144 ↗
24. XPS and ESD study of carbon and oxygen chemistry on TiZrV NEG10.1016/S0042-207X(00)00469-3 ↗
25. A systematic first-principles study of surface energies, surface relaxation and Friedel oscillation of magnesium surfaces10.1088/0022-3727/47/11/115305 ↗