Symmetry between the anisotropic N behavior in the lattice under high pressures and the formation of expanded austenite
Source abstract
Abstract
Abstract The nitrogen expanded austenite ( γ N or the S-phase), easily attainable by nitriding processes of FCC chromium-containing materials such as stainless steel (SS), Ni-based superalloys and CoCr alloys, discloses singular properties such as strong anisotropic expansion and crystal direction-dependent diffusion. These fundamental aspects were undertaken here from an experimental-theoretical approach. The S-phase was produced by plasma nitriding on SS 316L powder grains, and the material was submitted to quasi-hydrostatic compression-decompression experiments up to 30 GPa with in situ structural analyses. The experimental results agreed very well with a solid mechanics-based analysis. With this methodology – that was effective for modified surfaces – the anisotropic nitrogen reallocation in the lattice was found to obey a same linear relation during both compression (the S-phase decay) and nitriding (the S-phase formation). The transition from austenite with low nitrogen content – C N (the first-order expansion) to the S-phase (colossal saturated second-order) was featured by inversion of relative magnitudes, between 111 and 100 , of the K 〈 ϕ 〉 = E 〈 ϕ 〉 3 1 − 2 ν 〈 ϕ 〉 , elastic moduli E 〈 ϕ 〉 and Poisson's ratios ν 〈 ϕ 〉 ( ϕ = hkl ), all of them dependent on the orientation factor Γ [ ϕ ] . Rates of compression/expansion between 111 and 100 were affected accordingly. Such phenomena was concluded to arise from the inversion of the anisotropy factor, from A γ > 1 to A γ N 1 , which is an intrinsic property of the nitrided austenite and rules the aforementioned anisotropy inversions. Stress-induced nitrogen redistribution among crystal directions (at constant temperature) promoted changes in C N and affected elastic constants ( S ij ). It let the elastic modulus evolve with stresses applied on the solid. The elastic properties S ij and E 〈 ϕ 〉 of the S-phase were determined at different pressure ranges, including pressures close to the atmospheric condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Formation of metastable diffusion layers in Cr-containing iron, cobalt and nickel alloys after nitrogen insertion10.1016/j.surfcoat.2016.09.059 ↗
2. Phase and composition depth distribution analyses of low energy, high flux N implanted stainless steel10.1063/1.358561 ↗
3. Stress induced anisotropic diffusion during plasma-assisted nitriding of a Ni-based alloy10.4028/www.scientific.net/MSF.475-479.3669 ↗
4. Effect of grain orientation on the nitriding rate of a nickel base alloy studied by electron backscatter diffraction10.1016/S0257-8972(02)00611-4 ↗
5. Modification of metals by plasma immersion ion implantation10.1016/j.surfcoat.2018.04.039 ↗
6. Analysis of in situ XRD measurements for low energy ion beam nitriding of austenitic stainless steel10.1016/j.surfcoat.2014.03.047 ↗
7. Hardness and elastic modulus gradients in plasma-nitrided 316L polycrystalline stainless steel investigated by nanoindentation tomography10.1016/j.actamat.2011.12.012 ↗
8. Anisotropy changes in hardness and indentation modulus induced by plasma nitriding of 316L polycrystalline stainless steel10.1016/j.scriptamat.2010.08.058 ↗
9. Elastic anisotropy of γ′-Fe4N and elastic grain interaction in γ′-Fe4N1-y layers on α-Fe: first-principles calculations and diffraction stress measurements10.1016/j.actamat.2007.07.001 ↗
10. Kinetic model of anisotropic stress assisted diffusion of nitrogen in nitrided austenitic stainless steel10.1016/j.surfcoat.2019.03.054 ↗
11. T. Christiansen, M.A.J. Somers, Avoiding Ghost Stress on Reconstruction of Stress- and Composition-Depth Profiles from Destructive X-Ray Diffraction Depth Profiling, 424, 2006, pp. 181–189. doi:10.1016/j.msea.2006.03.007.10.1016/j.msea.2006.03.007 ↗
12. Modeling of stress induced nitrogen diffusion in nitrided stainless steel10.1016/j.surfcoat.2011.01.040 ↗
13. The COMPRES/GSECARS gas-loading system for diamond anvil cells at the advanced photon source10.1080/08957950802333593 ↗
14. The ruby pressure standard to 150 GPa10.1063/1.2135877 ↗
15. C. Prescher, V.B. Prakapenka, High Pressure Research: An DIOPTAS: A Program for Reduction of Two-Dimensional X-Ray Diffraction Data and Data Exploration, 2015, pp. 37–41. doi:10.1080/08957959.2015.1059835.10.1080/08957959.2015.1059835 ↗
16. On the S-phase formation and the balanced plasma nitriding of austenitic-ferritic super duplex stainless steel10.1016/j.apsusc.2017.11.021 ↗
17. Fityk: a general-purpose peak fitting program10.1107/S0021889810030499 ↗
18. Modelling the evolution of composition-and stress-depth profiles in austenitic stainless steels during low-temperature nitriding10.1088/0965-0393/24/2/025003 ↗
19. S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys10.1179/095066009X12572530170589 ↗
20. Comparative studies of yield strength and elastic compressibility between nanocrystalline and bulk cobalt10.1063/1.4724338 ↗
21. Residual stress
22. Cullity · 2001
23. Stress induced and concentration dependent diffusion of nitrogen in plasma nitrided austenitic stainless steel10.1016/j.vacuum.2012.03.026 ↗
24. Stress and composition of carbon stabilized expanded austenite on stainless steel10.1007/s11661-008-9717-9 ↗
25. Development and relaxation of stress in surface layers; composition and residual stress profiles in γ′-Fe4N1-xlayers on α-Fe substrates10.1007/BF02656436 ↗
26. Swelling effect on stress induced and concentration dependent diffusion of nitrogen in plasma nitrided austenitic stainless steel10.1016/j.commatsci.2013.02.007 ↗
27. Orientation dependence of nitrogen supersaturation in austenitic stainless steel during low-temperature gas-phase nitriding10.1016/j.actamat.2014.07.007 ↗
28. DeHoff · 2006
29. Integration of a broad beam ion source with a high-temperature X-ray diffraction vacuum chamber10.1063/1.4765703 ↗
30. On the determination of stress profiles in expanded austenite by grazing incidence X-ray diffraction and successive layer removal10.1016/j.actamat.2015.04.040 ↗
31. The effect of hydrogen on plasma nitriding of austenitic stainless steel: kinetic modeling10.1007/s11661-015-3183-y ↗
32. High-order diffractometry of expanded austenite using synchrotron radiation10.1016/j.surfcoat.2007.07.062 ↗
33. Nitrogen strengthening of a stable austenitic stainless steel10.1016/0001-6160(87)90131-3 ↗
34. Effective biaxial modulus and strain energy density of ideally (h k l)-fiber-textured cubic polycrystalline films10.1016/j.apsusc.2007.12.054 ↗
35. Cullity · 2014
36. Fundamental and innovations in plasma assisted diffusion of nitrogen and carbon in austenitic stainless steels and related alloys10.1002/ppap.200930003 ↗
37. Swelling of 316L austenitic stainless steel induced by plasma nitriding10.1007/s10853-011-5494-8 ↗
38. Characterization of the expanded austenite developed on AISI 316 LM steel by plasma nitriding10.2298/JMMB151115026K ↗
39. Calculation of single-crystal elastic constants for cubic crystal symmetry from powder diffraction data10.1107/S002188989800898X ↗
40. Meyers · 2009
41. A.P. Boresi, R.J. Schmidt, Advanced Mechanics of Materials – Solution Manual, 2003, p. 681.
42. Mahan · 2011
43. Ashcroft · Solid State Phys. · 1976
44. Nitriding of stainless steel: PIII or low energy nitriding?10.1002/ppap.200600102 ↗
45. Nitriding of austenitic stainless steel using pulsed low energy Ion implantation10.1016/j.surfcoat.2011.02.010 ↗