The investigation of in-situ protection effect of LaCo0.6Ni0.4O3-δ cathode contact layer on high temperature oxidation of Fe-16Cr alloy as solid oxide fuel cell interconnect
Source abstract
Abstract
Abstract The cathode contact material is one of the main components in planar solid oxide fuel cell (SOFC) stack for its role in maintaining stable electrical connection and forming protection coating for metallic interconnect. Aiming at studying the oxidation kinetics of Fe-16Cr alloy, the LaCo0.6Ni0.4O3-δ (LCN) with different particle sizes are chosen as in-situ protective coating to investigate their heat resistant effect at 750 °C for up to 500 h. The oxidation rates of the coated alloy are approximately lowered to a quarter compared to that of the bare alloy. The oxidized specimens are characterized to obtain the morphology, thickness, composition and phase structure of the oxide scales. The area specific resistances contributed by the oxide scale are 0.101 Ω cm2 and 0.062 Ω cm2 for the bare and coated alloy, respectively, which is consistent with oxidation kinetic plots. Furthermore, a degradation test of 5-cell stack is conducted to evaluate the effect of in-situ protective coating on oxidation of Fe-16Cr alloy in real SOFC operation condition. The results reveal that the presence of the LCN layer can effectively improve the long term operation stability for SOFC stack.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Solid oxide fuel cells: fundamental aspects and prospects10.1016/S0013-4686(00)00330-3 ↗
2. Dynamic modeling and operation strategy of an NG-fueled SOFC-WGS-TSA-PEMFC hybrid energy conversion system for fuel cell vehicle by using MATLAB/SIMULINK10.1016/j.energy.2019.03.119 ↗
3. Fuel flexibility for a turbocharged SOFC system10.1016/j.egypro.2019.01.454 ↗
4. Sealants for solid oxide fuel cells10.1016/j.jpowsour.2005.05.002 ↗
5. Oxidation behavior of metallic interconnect in solid oxide fuel cell stack10.1016/j.jpowsour.2017.03.092 ↗
6. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
7. Oxidation behavior of metallic interconnects for SOFC in coal syngas10.1016/j.ijhydene.2008.11.050 ↗
8. Recent advances in metallic interconnects for solid oxide fuel cells10.1179/174328007X212526 ↗
9. Recent development of SOFC metallic interconnect10.1016/S1005-0302(10)60049-7 ↗
10. Development of a new cost effective Fe–Cr ferritic stainless steel for SOFC interconnect10.1016/j.ijhydene.2015.05.125 ↗
11. Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes10.1149/1.1837264 ↗
12. High temperature oxidation behavior of SUS430 SOFC interconnects with Mn-Co spinel coating in air10.1016/j.jallcom.2019.01.015 ↗
13. Performance evaluation of a new Fe-Cr-Mn alloy in the reducing atmosphere of solid oxide fuel cells10.1016/j.jallcom.2018.08.002 ↗
14. Investigation on the oxidation and corrosion behaviors of FeCrZr alloy as a protective material for Zr cladding10.1016/j.jallcom.2018.04.250 ↗
15. Post-mortem evaluation of oxidized atmospheric plasma sprayed Mn–Co–Fe oxide spinel coatings on SOFC interconnectors10.1016/j.ijhydene.2014.08.105 ↗
16. Formation of sol–gel derived (Cu,Mn,Co)3O4 spinel and its electrical properties10.1016/j.ceramint.2017.03.060 ↗
17. Microstructure and phase evolution of atmospheric plasma sprayed Mn-Co-Fe oxide protection layers for solid oxide fuel cells10.1016/j.jeurceramsoc.2018.08.027 ↗
18. Comparison of MnCo2O4 coated Crofer 22 H, 441, 430 as interconnects for intermediate-temperature solid oxide fuel cell stacks, J. Alloy10.1016/j.jallcom.2019.153229 ↗
19. Cu- and Ni-doped Mn1.5Co1.5O4 spinel coatings on metallic interconnects for solid oxide fuel cells10.1016/j.ijhydene.2013.07.025 ↗
20. Solution precursor plasma spray process: a promising route for the fabrication of Mn-Co oxide based protective coating for SOFC10.1016/j.surfcoat.2017.05.052 ↗
21. Protective coating based on manganese–copper oxide for solid oxide fuel cell interconnects: plasma spray coating and performance evaluation10.1016/j.ceramint.2018.03.220 ↗
22. LaNi0.6Co0 4O3−δ dip-coated on Fe–Cr mesh as a composite cathode contact material on intermediate solid oxide fuel cells10.1016/j.jpowsour.2014.07.040 ↗
23. Evaluation of using protective/conductive coating on Fe-22Cr mesh as a composite cathode contact material for intermediate solid oxide fuel cells10.1016/j.ijhydene.2015.02.052 ↗
24. (La,Sr)(Fe,Co)O3-based cathode contact materials for intermediate-temperature solid oxide fuel cells10.1016/j.ijhydene.2017.09.122 ↗
25. Characteristics of Mn-Co and Ni-Co metal powders mixed with oxides as cathode contact materials for SOFC10.1016/j.ijhydene.2018.12.146 ↗
26. Cathode-side electrical contact and contact materials for solid oxide fuel cell stacking: a review10.1016/j.ijhydene.2017.08.005 ↗
27. LaCo0.6Ni0.4O3−δ as cathode contact material for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2012.06.052 ↗
28. Stability study on a novel micro structure configuration of cathode contact layer for solid oxide fuel cell stack10.1016/j.ijhydene.2016.03.059 ↗
29. Study on component interface evolution of a solid oxide fuel cell stack after long term operation10.1016/j.jpowsour.2018.03.040 ↗
30. Oxidation kinetics and phase evolution of a Fe–16Cr alloy in simulated SOFC cathode atmosphere10.1016/j.jpowsour.2005.09.056 ↗
31. Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties10.1016/j.ssi.2004.10.004 ↗
32. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
33. Improvement on durability and thermal cycle performance for solid oxide fuel cell stack with external manifold structure10.1016/j.energy.2018.02.072 ↗
34. Post-test characterization of a solid oxide fuel cell stack operated for more than 30,000 hours: the cell10.1016/j.jpowsour.2017.11.025 ↗
35. Challenges in fabricating planar solid oxide fuel cells: a review10.1016/j.rser.2017.01.019 ↗