journal article·2025-07

Effect of heat treatment process parameters, cooling rate on microstructure morphology, mechanical behaviour and texture evolution of two phase (α+β) Ti-6Al-4V alloy

Utkal Suresh Patil, S. M. Jagadeesh Babu, M.K. Thota, S. Avinash, Rahul Ramesh Kulkarni, S. Gangolu, Dasharath S M, Manjesh Kumar Mishra

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Microstructure and microhardness of heat-treated Ti-6Al-2Sn-4Zr-6Mo alloy10.1016/j.jallcom.2013.03.046 ↗
2. Effect of heat treatment processes on microstructure and mechanical behavior of TC21 titanium alloy10.4236/ojmetal.2017.73004 ↗
3. The effect of microstructure on the mechanical properties of two-phase titanium alloys10.1016/S0924-0136(02)00248-0 ↗
4. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
5. Control of microstructure and texture in Ti-6A1–4 V
6. G. Liitjering, J. Albrecht, O.M. Ivasishin, Influence of Cooling Rate and β Grain Size on the Tensile Properties of (α+β) Ti Alloys, in: P.A. Blenkinsop, W.J. Evans, H.M. Flower (Eds.), Titanium ’95 Science and Technology, Birmingham, UK, 1996: pp. 1163–1170.
7. Effects of multistage aging treatment on the microstructure and mechanical properties of α + β-Type Ti-6Al-7Nb alloy10.1007/s11665-023-08774-9 ↗
8. Microstructure and mechanical properties of high strength Two-Phase titanium alloys
9. Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)10.1016/j.msea.2017.01.019 ↗
10. Effect of thermal cycling on mechanical and microstructural properties of heat-treated Ti-6Al-4V alloy10.1088/2053-1591/ac487d ↗
11. Microstructure evolution and phase transformation kinetics of low cost Ti-35421 titanium alloy during continuous heating10.1016/j.jmrt.2021.06.071 ↗
12. Effect of β recrystallization on the precipitation evolution of primary α phase and the phase transformation inheritance during thermomechanical processing in Ti-55511 alloy10.1016/j.jmrt.2023.10.136 ↗
13. Microstructure design and mechanical properties in a near- α Ti–4Mo alloy10.1016/j.actamat.2015.06.043 ↗
14. Effects of solution-aging treatments on microstructure features, mechanical properties and damage behaviors of additive manufactured Ti–6Al–4V alloy10.1016/j.msea.2020.140380 ↗
15. Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Ti–6Al–4V and TiB/Ti–6Al–4V composite: a comparative study10.1016/j.msea.2020.140415 ↗
16. Effect of heat treatment on microstructure and tensile property of Ti-6Al-6V-2Sn alloy
17. On the warm temperature strain accommodation mechanisms of Ti–6Al–4V alloy holding different starting microstructures10.1016/j.jmrt.2021.06.077 ↗
18. Effects of solution treatment on microstructure evolution and mechanical properties of Ti-22Al-24Nb-0.5Mo alloy.pdf
19. Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT)10.1016/j.scriptamat.2017.05.038 ↗
20. Effect of heat treatment on the mechanical properties of a 3 mm commercially pure titanium plate (CP-Ti Grade 2)
21. Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging10.1080/21663831.2017.1350211 ↗
22. Competition mechanism of dynamic recrystallization and recovery and microstructure evolution of TC4 alloy during warm deformation10.1016/j.jmrt.2025.04.200 ↗
23. A review on deformation mechanisms of metastable β titanium alloys10.1007/s10853-024-10063-2 ↗
24. The influence of stacking faults on mechanical behavior of advanced materials10.1016/j.msea.2020.140696 ↗
25. Understanding the effect of refractory metal chemistry on the stacking fault energy and mechanical property of Cantor-based multi-principal element alloys10.1016/j.ijplas.2024.104020 ↗
26. New hybrid manufacturing routes combining forging and additive manufacturing to efficiently produce high performance components from Ti-6Al-4V
27. An overview of the thermomechanical processing of α/β titanium alloys: current status and future research opportunities10.1007/s11661-020-05625-3 ↗
28. A novel near-α high temperature titanium alloy with trimodal microstructure and submicron-nanosilicides for superior mechanical properties at both room and elevated temperatures10.1016/j.compositesb.2025.112441 ↗
29. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment
30. Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments10.1016/j.jallcom.2018.04.158 ↗
31. R.R. Kulkarni, N. Prabhu, P.D. Hodgson, B.P. Kashyap, Kinetics of γ-Mg17Al12 Phase Dissolution and its Effect on Room Temperature Tensile Properties in As-Cast AZ80 Magnesium Alloy, in: Advances in Materials Science and Technology (AMST), Trans Tech Publications Ltd, 2014: pp. 207–211. https://doi.org/10.4028/www.scientific.net/SSP.209.207.10.4028/www.scientific.net/SSP.209.207 ↗
32. Effect of heat treatment on microstructure and room temperature mechanical properties in 55Si7 spring steel
33. Impact of cold upset forging during heat treatment in Al-1.1Si-0.97Mg alloy10.1088/2631-8695/ada3b1 ↗
34. Coarsening kinetics of primary alpha in a near alpha titanium alloy10.1016/j.jallcom.2017.11.296 ↗
35. Thermo-Mechanical
36. Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness10.1016/j.actamat.2018.09.064 ↗
37. Analysis of globularization modeling and mechanisms of alpha/beta titanium alloy10.1016/j.jallcom.2019.02.205 ↗
38. M. Hillert, Phase Equilibria, Phase Diagrams and Phase Transformations, Second, Cambridge University Press, New York, 2008.10.1017/CBO9780511812781 ↗
39. Banerjee · 2007
40. Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys10.1016/j.actamat.2017.09.018 ↗
41. BPANN modified constitutive descriptions for flow behavior and softening mechanism in the α + β phase region of Ti-55511 alloy with equiaxed microstructure10.1016/j.jmrt.2023.12.194 ↗
42. Enhanced strength-ductility-impact toughness synergy of CT20 titanium alloy by introducing a multi-level lamellar martensitic α structure10.1016/j.matchar.2024.114108 ↗
43. Effect of solution treatment and aging on microstructure, tensile properties and creep behavior of a hot-rolled β high strength titanium alloy with a composition of Ti-3.5Al–5Mo–6V–3Cr–2Sn-0.5Fe-0.1B-0.1C10.1016/j.msea.2021.141728 ↗
44. Heat treatments of Ti6Al4V alloys for industrial applications: an overview10.1088/1757-899X/1107/1/012094 ↗
45. V.D. Barth, G.W.P. Rengstorff, Oxidation of Tungsten, Ohio, 1929.
46. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy10.1016/j.actamat.2014.06.064 ↗
47. Characterization of microstructure and texture evolution in Ti664 titanium alloy after multidirectional forging and annealing treatments10.1007/s11837-019-03772-6 ↗
48. Effects of the cooling rate on mechanical properties and microstructure of near-α Ti-6Al-3Zr-2Nb-Mo alloy10.1016/j.matchar.2022.112529 ↗
49. Tuning the morphology of Ti–5Al–5Mo–5V–3Cr–1Zr alloy: from brittle to ductile fracture10.1016/j.msea.2019.138487 ↗
50. Lütjering · 2007
51. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
52. A new β-Ti alloy with good tensile properties by the mixed microstructure characteristics of α phase10.1016/j.jallcom.2022.166755 ↗
53. The analysis of changes in the crystal structure of Near-Beta titanium alloy in the Solution-Treated and aged conditions after static tensile testing10.3390/cryst13081223 ↗
54. An investigation on the effect of surface morphology and crystalline texture on corrosion behavior, structural and magnetic properties of electrodeposited nanocrystalline nickel films10.1016/j.apsusc.2013.12.053 ↗
55. Influence of heat treatment conditions on the mechanical properties of Ti–6Al–4V alloy10.1080/00084433.2017.1412557 ↗
56. Accelerated intermetallic phase amorphization in a Mg-based high-entropy alloy powder10.1016/j.jma.2024.05.013 ↗
57. Unraveling the connection of electronic and phononic structure with mechanical properties of commercial AZ80 alloy10.1016/j.matlet.2024.136501 ↗
58. Activated slip systems in bimodal Ti–6Al–4V plastically deformed at low and moderately high temperatures10.1016/j.msea.2020.140211 ↗
59. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
60. A study of active deformation systems in titanium alloys: dependence on10.1016/S0921-5093(02)00421-5 ↗
61. Effect of β (110) texture intensity on α-variant selection and microstructure morphology during β→α phase transformation in near α titanium alloy10.1016/j.actamat.2016.12.069 ↗
62. Microstructural characterization and tensile properties of Al-Mg-Fe-Ce alloy at room and elevated temperatures10.1007/s11837-020-04039-1 ↗
63. Experimental assessment of variant selection rules for grain boundary α in titanium alloys10.1016/j.actamat.2015.09.021 ↗
64. Effect of microstructure on the tensile properties and impact toughness of TC21G titanium alloy10.1016/j.matchar.2022.111752 ↗
65. Tracking microstructure, texture and boundary misorientation evolution of hot deformed and post-deformation annealed Ti-6Al-4V alloy10.1016/j.msea.2015.09.060 ↗
66. Effects of multi-pass drawing strain and heat treatment on microstructure, texture and mechanical properties of Ti-6Al-4V alloy10.1016/j.msea.2019.04.087 ↗
67. Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets10.1016/S1359-6454(01)00427-X ↗
68. The effect of aluminium on twinning in binary alpha-titanium10.1016/j.actamat.2015.09.048 ↗
69. Dislocation mediated variant selection for secondary twinning in compression of pure titanium10.1016/j.actamat.2016.10.063 ↗
70. Simultaneous improvement in strength and ductility of CT20 titanium alloy at cryogenic temperature10.1016/j.matdes.2023.112416 ↗
71. A coupled EBSD/EDS method to determine the primary- and secondary-alpha textures in titanium alloys with duplex microstructures10.1016/j.msea.2008.06.022 ↗
72. Modeling the transformation texture of Ti-64 sheets after rolling in the β-field10.1016/S0921-5093(97)80111-6 ↗
73. Recent developments in plastic forming technology of titanium alloys10.1007/s11431-010-4206-y ↗
74. Texture evolution during grain growth in recrystallized commercially pure titanium10.1016/j.msea.2005.02.049 ↗
75. Inoue · 1988 · 997
76. Dislocation slip and crack nucleation mechanism in Dual-Phase microstructure of titanium alloys: a review10.1007/s40195-022-01505-4 ↗
77. Tensile deformation and fracture of Ti-5Al-5V-5Mo-3Cr-1.5Zr-0.5Fe alloy at room temperature10.1016/j.msea.2013.08.055 ↗