journal article·2025-05Open access

Strategic approach to simultaneously enhance strength, formability, and corrosion-resistance synergy of age-hardenable Mg-Zn-Ca-Al-Mn alloy sheet with low Mn content via optimizing Zn and Ca contents

K. Kikuchi, T. Nakata, Z.H. Li, T.T. Sasaki, Y. Miyashita, S. Kamado

Abstract

To develop a strong, room-temperature (RT)-formable, and corrosion-resistant Mg alloy sheet, we investigate the age-hardening response, RT formability, tensile properties, and corrosion resistance of low-Mn-containing Mg-(1, 2)Zn-(0.2, 0.5, 1)Ca-0.2Al-0.2Mn (ZXAM, mass%) alloy sheets. The Zn content minimally affects the abovementioned properties. However, the Ca content is important for significantly improving the properties. The addition of ≥ 0.5mass%Ca enhances the RT formability by inclining the (0001) poles toward the transverse direction. Dense corrosion products are formed on the surface of the ≥ 0.5mass%Ca-containing ZXAM alloy sheets, resulting in improved corrosion resistance. Moreover, the aged ≥ 0.5mass%Ca-containing ZXAM alloy sheets exhibit high strength along the rolling direction (RD), in which the 0.2 % proof strength (PS) exceeds 200 MPa. Aging-treatment reduces the corrosion resistance slightly, although the corrosion rates are lower compared with those of commercial wrought Mg alloys. Thereafter, a Mg-2Zn-0.5Ca-0.2Al-0.2Mn alloy sheet simultaneously achieves an excellent combination of strength, RT formability, and corrosion resistance via age-hardening. The PS along the RD and the Index Erichsen value of the sheet reached 213 MPa and 8.7 mm, respectively, and its corrosion rate after immersion in 3.5mass%NaCl solution for 3 days is 3.0 mm・y −1 . • A new corrosion-resistant Mg alloy with high strength and formability was designed. • An optimized composition was Mg-2Zn-0.5Ca-0.2Al-0.2Mn (mass%). • The solution-treated sample showed a large I.E. value of 8.7 mm. • The proof strength along the RD reached 213 MPa after aging. • The low Mn content and dense protective layer led to a small corrosion rate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. Development and application of magnesium alloy parts for automotive OEMs: a review10.1016/j.jma.2022.12.015 ↗
2. Toward development of strong and formable magnesium alloy sheets with bake-hardenability10.1007/s11837-021-04613-1 ↗
3. Review: magnesium sheet alloy development for room temperature forming10.1007/s11837-021-04616-y ↗
4. Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass10.1016/j.jallcom.2011.04.132 ↗
5. New Mg–Al based alloy sheet with good room-temperature stretch formability and tensile properties10.1016/j.scriptamat.2020.01.015 ↗
6. Effects of Si on the aging behaviour and formability of aluminium alloys based on AA601610.1016/S0921-5093(01)00969-8 ↗
7. Factors affecting the strength and formability of alloys based on Al-3 wt% Mg10.1016/S0921-5093(00)02018-9 ↗
8. Substantial improvement in cold formability of concentrated Mg–Al–Zn–Ca alloy sheets by high temperature final rolling10.1016/j.actamat.2021.117328 ↗
9. Effect of microalloyed Al and Ca on mechanical properties and corrosion resistance of high-speed extruded Mg-2Zn-1Mn (mass%) alloy10.1016/j.matchar.2022.112121 ↗
10. Realizing impressive superplasticity in a low-alloyed Mg-Zn-Ca-Al-Mn alloy: the roles of grain boundary segregation and dense β-Mn particles10.1016/j.jma.2023.05.014 ↗
11. Creep behaviors of Mg–6Zn-0.4Mn-0.3Al-0.2Ca (wt%) alloy enhanced by icosahedral quasicrystal10.1016/j.msea.2023.146060 ↗
12. Enhanced oxidation and overheating resistance of the extruded Mg–Zn–Al–Mn magnesium alloy by Calcium addition10.1016/j.jma.2023.03.004 ↗
13. Improving tensile properties of a room-temperature formable and heat-treatable Mg–6Zn-0.2Ca (wt%) alloy sheet via micro-alloying of Al and Mn10.1016/j.msea.2019.138690 ↗
14. Influence of aluminum content on microstructure and performance of Mg-Zn-Ca-Al-Mn magnesium alloys10.1016/j.jallcom.2023.169719 ↗
15. Simultaneously achieving excellent mechanical properties and high thermal conductivity in a high Mn-containing Mg-Zn-Ca-Al-Mn sheet alloy10.1016/j.jallcom.2021.161394 ↗
16. A thermodynamic approach to the precipitation hardening of magnesium alloy with high formability10.1016/j.scriptamat.2022.115231 ↗
17. Effect of Al/Mn ratio on corrosion behavior of lean Mg-Zn-Ca-Al-Mn alloy processed by twin-roll casting10.1016/j.corsci.2022.110938 ↗
18. Negatively correlated corrosion and stress corrosion cracking of Mg-Al-Mn-Ca based alloys10.1016/j.corsci.2023.111747 ↗
19. A corrosion-resistant and age-hardenable Mg-Al-Mn-Ca-Ce dilute alloy with fine-grained structure processed by controlled rolling10.1016/j.jmst.2023.04.029 ↗
20. Simultaneous achievement of high thermal conductivity, high strength and formability in Mg-Zn-Ca-Zr sheet alloy10.1080/21663831.2020.1759718 ↗
21. Role of Zn on the rapid age-hardening in Mg-Ca-Zn alloys10.1016/j.scriptamat.2022.114735 ↗
22. Age-hardening response of Mg–0.3 at%Ca alloys with different Zn contents10.1016/j.msea.2009.07.027 ↗
23. Precipitation-hardened Mg–Ca–Zn alloys with superior creep resistance10.1016/j.scriptamat.2005.08.035 ↗
24. Understanding magnesium corrosion. A framework for improved alloy performance10.1002/adem.200310405 ↗
25. Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ3110.1016/j.jallcom.2020.153844 ↗
26. The effects of Ca and Mn on the microstructure, texture and mechanical properties of Mg-4 Zn alloy10.1016/j.jma.2020.03.012 ↗
27. Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process10.1016/j.msea.2020.138929 ↗
28. Deformation mechanism and texture and microstructure evolution during high-speed rolling of AZ31B Mg sheets10.1007/s10853-008-3021-3 ↗
29. Experimental study of ternary Ca–Mg–Si phase equilibria and thermodynamic assessment of Ca–Si and Ca–Mg–Si systems10.1016/j.intermet.2003.07.001 ↗
30. VillarsPearson’s · 1997 · 1
31. Precipitation hardening of Mg-Ca(-Zn) alloys10.1016/S1359-6462(97)00294-7 ↗
32. Second phase formation in melt-spun Mg–Ca–Zn alloys10.1016/j.msea.2004.04.043 ↗
33. A computational thermodynamic model of the Ca–Mg–Zn system10.1016/j.jallcom.2003.08.097 ↗
34. Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature10.1016/j.scriptamat.2009.06.026 ↗
35. Effects of aging parameters on formability of 6061-O alloy10.1016/j.matdes.2010.05.050 ↗
36. Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting10.1016/j.actamat.2018.07.057 ↗
37. Role of grain boundary segregation on microstructural development in basal-textured Mg-Al-Zn alloy sheet10.1016/j.scriptamat.2022.114828 ↗
38. Influences of initial texture on microstructure and stretch formability of Mg–3Al–1Zn alloy sheet obtained by a combination of high temperature and subsequent warm rolling10.1016/j.scriptamat.2010.04.032 ↗
39. Improving Formability of Mg–Ca–Zr Sheet Alloy by Microalloying of Zn10.1002/adem.201600293 ↗
40. Improved mechanical properties of AZ31 magnesium alloy sheets by repeated cold rolling and annealing using a small pass reduction10.1016/j.msea.2015.04.057 ↗
41. Effect of micro-texture on tensile properties and room-temperature stretch formability of Mg-Al-Zn alloy sheet10.1016/j.jallcom.2022.168519 ↗
42. A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability10.1016/j.scriptamat.2017.05.034 ↗
43. Role of Zn on the room temperature formability and strength in Mg–Al–Ca–Mn sheet alloys10.1016/j.jallcom.2020.156347 ↗
44. Development of corrosion-resistant Mg-Al-Ca-Mn-Zn alloy sheet with good tensile properties and stretch formability10.1016/j.jallcom.2022.164752 ↗
45. Understanding room-temperature deformation behavior in a dilute Mg–1.52Zn–0.09Ca (mass%) alloy sheet with weak basal texture10.1016/j.msea.2022.143638 ↗
46. Effects of group II elements on the cold stretch formability of Mg–Zn alloys10.1016/j.actamat.2014.10.005 ↗
47. Effects of zinc concentration on the stretch formability at room temperature of the rolled Mg-Zn-Ca alloys10.2320/jinstmet.75.35 ↗
48. Texture evolution in Mg-Zn-Ca alloy sheets
49. Enhancement of stretch formability at room temperature by addition of Ca in Mg-Zn alloy10.2320/matertrans.M2009385 ↗
50. Effects of Ca and Sr additions on microstructure, mechanical properties, and ignition temperature of hot-rolled Mg–Zn alloy10.1016/j.msea.2019.138474 ↗
51. Enhanced mechanical properties and formability of hot-rolled Mg–Zn–Mn alloy by Ca and Sm alloying10.1016/S1003-6326(22)65860-6 ↗
52. Room-temperature stretch formability, tensile properties, and microstructures of precipitation hardenable Mg–6Zn-0.2Ca (mass%) alloy sheets micro-alloyed with Ce or Y10.1016/j.msea.2020.140563 ↗
53. Influence of Zn concentration on stretch formability at room temperature of Mg–Zn–Ce alloy10.1016/j.msea.2010.09.081 ↗
54. Compositional optimization of Mg–Zn–Sc sheet alloys for enhanced room temperature stretch formability10.1016/j.jallcom.2019.152891 ↗
55. Simulation-aided analysis on mechanical properties of dilute Mg-Zn-Ca alloy sheets10.1016/j.jallcom.2022.164285 ↗
56. High strength and formable Mg–6.2Zn–0.5Zr–0.2Ca alloy sheet processed by twin roll casting10.1016/j.msea.2014.04.058 ↗
57. Effects of solute redistribution during heat treatment on micro-galvanic corrosion behavior of dilute Mg-Al-Ca-Mn alloy10.1016/j.corsci.2023.110971 ↗
58. Microstructure, mechanical and corrosion properties of Mg-1.61Al-1.76Ca alloy under different extrusion temperatures10.1007/s11665-020-04557-8 ↗
59. Effect of Zn on mechanical and corrosion properties of Mg-Sc-Zn alloys10.1016/j.jmst.2023.01.058 ↗
60. Effect of grain structure on the stress corrosion cracking (SCC) behavior of an as-extruded Mg-Zn-Zr alloy10.1016/j.corsci.2019.06.017 ↗
61. Effect of residual tensile stress and crystallographic structure on corrosion behavior of AZ31 Mg alloy rolled sheets
62. Effect of tensile direction on corrosion behavior of AZ31 magnesium alloy rolled sheets
63. Plastic deformation behavior of a Mg-1.5Zn-0.1Ca (mass%) alloy sheet under different strain paths10.1016/j.msea.2023.144772 ↗
64. Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys10.1016/j.actamat.2017.03.046 ↗
65. Determining the strength of GP zones in Mg alloy AXM10304, both parallel and perpendicular to the zone10.1016/j.actamat.2019.04.035 ↗
66. Improving flame resistance and mechanical properties of magnesium–silver–calcium sheet alloys by optimization of calcium content10.1016/j.jallcom.2020.155551 ↗
67. Improving room-temperature stretch formability of a high-alloyed Mg–Al–Ca–Mn alloy sheet by a high-temperature solution-treatment10.1016/j.msea.2020.140399 ↗
68. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
69. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
70. Time-sequential corrosion behaviour observation of micro-alloyed Mg-0.5Zn-0.2Ca alloy via a quasi-in situ approach10.1016/j.corsci.2019.108096 ↗
71. Effect of impurity reduction on rollability of AZ31 magnesium alloy10.1007/s10853-011-5828-6 ↗
72. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn10.1016/j.actamat.2004.07.015 ↗
73. Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet10.1016/j.msea.2007.09.069 ↗
74. Effect of particles on the formation of deformation twins in a magnesium-based alloy10.1016/j.msea.2009.04.001 ↗
75. Reducing the tension–compression yield asymmetry in a Mg–8Al–0.5Zn alloy via precipitation10.1016/j.scriptamat.2009.11.024 ↗
76. Solute strengthening of prismatic slip, basal slip and {101̅2} twinning in Mg and Mg–Zn binary alloys10.1016/j.ijplas.2013.01.012 ↗
77. Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys10.1016/j.msec.2012.07.042 ↗
78. Influence of chloride ion concentration and temperature on the corrosion of Mg–Al alloys in salt fog10.1016/j.corsci.2010.01.020 ↗
79. Influence of ultra-fine grain structure on corrosion behaviour of biodegradable Mg-1Ca alloy10.1016/j.corsci.2019.108303 ↗
80. The corrosion characteristics and mechanism of directionally solidified Mg-3Zn-xCa alloys10.1016/j.jma.2022.02.010 ↗
81. Effect of the microstructure parameters on the corrosion characteristics of Mg-Zn-Ca alloy with columnar structure10.1016/j.jma.2021.12.017 ↗
82. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗
83. Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions10.1016/j.corsci.2016.03.019 ↗
84. Influence of crystallographic texture and grain size on the corrosion behaviour of as-extruded Mg alloy AZ31 sheets10.1016/j.corsci.2017.08.004 ↗
85. Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet10.1016/j.actamat.2017.05.027 ↗
86. Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy10.1016/j.corsci.2009.10.018 ↗
87. Corrosion behavior of fine-grained AZ31B magnesium alloy10.1016/j.corsci.2012.04.039 ↗
88. Effect of grain size on the electrochemical behavior of pure magnesium anode10.1016/j.jma.2017.09.003 ↗
89. Corrosion behavior of Mg-3Al-1Zn alloy with different grain refinement strategies10.1007/s10853-023-09315-4 ↗
90. Tailoring the corrosion behavior and mechanism of AZ31 magnesium alloys by different Ca contents for marine application10.1016/j.corsci.2021.109842 ↗