journal article·2025-04Open access

Influence of phase morphology on mechanical properties of dual-phase eutectic high-entropy alloys

Duy-Khanh Nguyen, Te-Hua Fang, Ching-Chien Huang

Abstract

The dual-phase eutectic high-entropy alloys (EHEA) have been attracted by their exceptional properties, which are achieved by combining two or more phases with different distribution patterns, which can strongly affect material interaction. However, there are not many reports on deformation behavior and tensile properties of the dual-phase EHEA with phase distributed intentionally. Therefore, this work uses Molecular Dynamic (MD) simulation to investigate the tensile model of dual-phase herringbone FeCoNiAl EHEA with various layer thicknesses and layers’ fold angles, along with a comparison to monocrystalline , dual-phase lamellae specimens. The results reveal that high tensile strength is achieved by alternately arranging hard and soft phases in lamellae layers perpendicular to the tensile direction or herringbone pattern morphology, especially the highest tensile strength of over 13 GPa achieved in the case of herringbone sample with a BCC layer thickness of 50 Å and layers’ fold angle of 55 0 . On the other hand, parallel phase layers in horizontal lamellae workpieces exhibit the lowest strength but allow for improved uniform elongation and remain slightly lower than that of a monocrystalline FCC case due to the inhibition of dislocation growth caused by the alternating hard phases. Meanwhile, the dual-phase herringbone morphologies provide uniform elongation up to 13.3 % due to the interlaminar stress dispersion across multiple slip systems of FCC content and the containment-reorientation atom migration function of the structural interfaces.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl 0.5 Fe alloy with boron addition10.1007/s11661-004-0254-x ↗
3. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
4. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
5. High-entropy alloys10.1038/s41578-019-0121-4 ↗
6. A review on the dynamic-mechanical behaviors of high-entropy alloys10.1016/j.pmatsci.2023.101090 ↗
7. A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy10.1016/j.corsci.2021.109341 ↗
8. An overview on fatigue of high-entropy alloys10.3390/ma16247552 ↗
9. Theory-guided design of high-entropy alloys with enhanced strength-ductility synergy10.1038/s41467-023-38111-6 ↗
10. Towards the best strength, ductility, and toughness combination: high entropy alloys are excellent, stainless steels are exceptional10.1016/j.actamat.2023.119280 ↗
11. A mechanistic interpretation of the strength-ductility trade-off and synergy in lamellar microstructures
12. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
13. Machine learning approach to predict new multiphase high entropy alloys10.1016/j.scriptamat.2021.113804 ↗
14. The exceptional strong face-centered cubic phase and semi-coherent phase boundary in a eutectic dual-phase high entropy alloy AlCoCrFeNi10.1038/s41598-018-33330-0 ↗
15. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
16. Microstructure and mechanical properties of AlCoxCrFeNi3-x eutectic high-entropy-alloy system10.1016/j.jallcom.2020.153886 ↗
17. Baker, I., Wu, M., and Wang, Z.J.M.C., 2019, Eutectic/Eutectoid Multi-principle Component Alloys: a Review, 147, 545-557.10.1016/j.matchar.2018.07.030 ↗
18. Effect of crystallographic orientations on shock-induced plasticity for CoCrFeMnNi high-entropy alloy
19. Jin, X., Bi, J., Zhang, L., Zhou, Y., Du, X., Liang, Y., Li, B.J.J. o A., and Compounds, 2019, A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties," 770, pp. 655-661.10.1016/j.jallcom.2018.08.176 ↗
20. A casting eutectic high entropy alloy with superior strength-ductility combination
21. Designing novel AlCoCrNi eutectic high entropy alloys
22. A strategy to design eutectic high-entropy alloys based on binary eutectics10.1016/j.jmst.2021.06.038 ↗
23. Design of eutectic high entropy alloys10.1007/s11661-022-06831-x ↗
24. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
25. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
26. Rapid alloy design from superior eutectic high-entropy alloys10.1016/j.scriptamat.2022.114875 ↗
27. Novel (CoFe 2 NiV 0.5 Mo 0.2) 100− x Nb x eutectic high-entropy alloys with excellent combination of mechanical and corrosion properties10.1007/s40195-020-01072-6 ↗
28. Microstructure and mechanical properties of AlCoxCrFeNi3-x eutectic high-entropy-alloy system10.1016/j.jallcom.2020.153886 ↗
29. Microstructure and mechanical properties variation with Ni content in Al0. 8CoCr0. 6Fe0. 7Nix (x= 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system10.1088/2053-1591/ab6580 ↗
30. Combinatorial synthesis of high entropy alloys: introduction of a novel, single phase, body-centered-cubic FeMnCoCrAl solid solution10.1016/j.jallcom.2016.08.326 ↗
31. Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method10.1016/j.intermet.2018.01.021 ↗
32. Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys10.1016/j.matdes.2016.11.055 ↗
33. Hierarchical multi-scale microstructural evolution in an as-cast Al2CuCrFeNi2 complex concentrated alloy10.1016/j.intermet.2015.12.013 ↗
34. A combinatorial assessment of AlxCrCuFeNi2 (0< x< 1.5) complex concentrated alloys: microstructure, microhardness, and magnetic properties10.1016/j.actamat.2016.06.025 ↗
35. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
36. Effect of phase morphology on microscopic deformation behavior of Mg–Li–Gd dual-phase alloys10.1016/j.msea.2021.140871 ↗
37. Crystallographic analysis and phase field simulation of transformation plasticity in a multifunctional β-Ti alloy
38. Herringbone structure in GeTe-based thermoelectric materials10.1016/j.actamat.2015.03.015 ↗
39. Effect of low temperature on tensile properties of AlCoCrFeNi2. 1 eutectic high entropy alloy10.1016/j.matchemphys.2017.06.023 ↗
40. Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2. 1 eutectic high entropy alloy10.1016/j.intermet.2020.107024 ↗
41. Thompson · LAMMPS-a Flexible Simulation Tool for Particle-based Materials Modeling at the Atomic, Meso, and Continuum Scales · 2022 · 271
42. Deformation behavior and strengthening mechanism of CuTa/CuTa amorphous/amorphous nanomultilayers10.1016/j.jnoncrysol.2022.121993 ↗
43. Competing failure modes in void and inclusion NiCoCrFeCu alloy under tensile simulation using molecular dynamic
44. Molecular dynamics simulations of tensile properties for FeNiCrCoCu high-entropy alloy
45. Strain rate and shear-transformation zone response of nanoindentation and nanoscratching on Ni50Zr50 metallic glasses using molecular dynamics10.1016/j.physb.2020.412021 ↗
46. Influences of grain size and temperature on tribological characteristics of CuAlNi alloys under nanoindentation and nanoscratch10.1016/j.ijmecsci.2020.105865 ↗
47. Deformation and machining mechanism of nanocrystalline NiCoCrFe high entropy alloys10.1016/j.jallcom.2022.166525 ↗
48. Plastic deformation in nanoindentation of Alx (CuCrFeNi) 1− x high entropy alloy10.1016/j.jallcom.2023.172172 ↗
49. Machining mechanism and deformation behavior of high-entropy alloy under elliptical vibration cutting10.1016/j.intermet.2020.107079 ↗
50. Machining mechanism of polycrystalline nickel-based alloy under ultrasonic elliptical vibration-assisted cutting10.1088/1361-651X/ad0316 ↗
51. Interface diffusion behavior of machining NiFeCo/Cu polycrystalline/single-crystal multilayers10.1016/j.jmapro.2024.08.007 ↗
52. Nguyen, D.-K., Fang, T.-H., and Huang, C.-C., Mechanical Properties of Dual-Phase Eutectic High-Entropy Alloys Under Nano-cutting, Proc. International Conference on Sustainability and Emerging Technologies for Smart Manufacturing, Springer, pp. 437-448.10.1007/978-981-97-7083-0_43 ↗
53. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties10.1016/j.matlet.2018.01.017 ↗
54. Gently lifting Gold’s herringbone reconstruction: trimethylphosphine on Au (111)10.1103/PhysRevB.82.205401 ↗
55. The scratch behaviour of AlXCoCrFeNi (x= 0.3 and 1.0) high entropy alloys10.1016/j.wear.2019.03.026 ↗
56. Mechanical properties of dual-phase eutectic high-entropy alloys10.1016/j.ijmecsci.2024.109389 ↗
57. Angular-dependent interatomic potential for large-scale atomistic simulation of iron: development and comprehensive comparison with existing interatomic models
58. A new transferable interatomic potential for molecular dynamics simulations of borosilicate glasses10.1016/j.jnoncrysol.2018.04.063 ↗
59. Role of local chemical fluctuations in the shock dynamics of medium entropy alloy CoCrNi10.1016/j.actamat.2021.117380 ↗
60. Model interatomic potentials for Fe–Ni–Cr–Co–Al high-entropy alloys10.1557/jmr.2020.294 ↗
61. Correlation between microstructure and soft magnetic parameters of Fe-Co-Ni-Al medium-entropy alloys with FCC phase and BCC phase10.1016/j.intermet.2020.106898 ↗
62. Effect of Mo and Ti on the microstructure and microhardness in AlCoFeNiMoTi high entropy alloys prepared by mechanical alloying and conventional sintering10.1016/j.apt.2020.02.008 ↗
63. Inverse determination of the cutting force on nanoscale processing using atomic force microscopy10.1088/0957-4484/15/5/004 ↗
64. Mechanical characteristics and thermal conductivity of defect single-layer buckled honeycomb germanene10.1088/1402-4896/ad2d2b ↗
65. Tailoring micro/nano-materials with special wettability for biomedical devices10.1016/j.bmt.2022.11.005 ↗
66. Tailoring nickel–cobalt bimetallic alloy as highly effective catalyst in modified separators for high-performance lithium-sulfur batteries10.1016/j.jallcom.2023.169242 ↗
67. Plastic activity in nanoscratch molecular dynamics simulations of pure aluminium10.1016/j.ijplas.2013.07.005 ↗
68. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
69. Numerical analysis of solid-liquid two-phase abrasive flow in microcutting polycrystalline materials based on molecular dynamics10.1007/s12541-018-0187-8 ↗
70. Al0. 3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties
71. Superior high tensile elongation of a single-crystal CoCrFeNiAl0. 3 high-entropy alloy by Bridgman solidification
72. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2. 1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
73. Mechanical properties of alloys consisting of two ductile phases
74. Formation of the ω phase in the titanium—iron system under shear deformation
75. A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel10.1038/s41598-021-87811-w ↗
76. Nucleation of Frank dislocation during the squeeze-out process in boundary lubrication: a molecular dynamics study10.3390/ma15030997 ↗
77. Elastic stress domains and the herringbone reconstruction on Au (111)10.1103/PhysRevLett.69.1564 ↗
78. Role of Fe/Mn elements tuning in the shock dynamics of CoCrNi-based alloy10.1016/j.ijmecsci.2024.109585 ↗
79. Tensile nanomechanics and the Hall-Petch effect in nanocrystalline aluminium10.1016/j.msea.2017.10.021 ↗
80. Effects of structure and strain rate on deformation mechanism of twin lamellar Al0. 3CoCrFeNi alloys
81. Ultrafine-grained AlCoCrFeNi2. 1 eutectic high-entropy alloy10.1080/21663831.2016.1160451 ↗