journal article·2025-04Open access

Microstructure detection of CaO-SiO2-based mold flux at high temperature by in-situ Raman spectroscopy

Gang Li, Yuanhui Qiu, Yan Luo, Qiangqiang Wang, Shengping He, Xubin Zhang

Abstract

In this study, in-situ high-temperature Raman spectroscopy was used to analyze the Raman spectra of two groups of CaO-SiO 2 -based mold fluxes with a basicity of 1.35 from room temperature (25 °C) to 1300 °C. The differences between the Raman spectra obtained by this method and those obtained by the conventional method in studying the melt structure were compared. The Raman spectrum of solid slag at room temperature was the most obvious at 910 cm −1 , and there was a long-range ordered spectral peak at 350 cm −1 in the low-wavenumber region. As the temperature increased, the sharp characteristic peaks of the crystal structure gradually transformed into a relatively smooth envelope, and the spectral peaks in the low-wavenumber region disappeared after complete melting. In addition, compared with the Raman spectrum peak of the molten slag, the spectral peak of the glassy slag sample exhibited an obvious blue shift . For the N group, the changes in the degree of polymerization (DOP) of the two samples were consistent with the changes in viscosity , while for the F group, they were opposite. As the CaF 2 content increased from 14.92 wt% to 24.87 wt%, the DOP of the melt decreased from 0.38 to 0.31, which was consistent with the actual viscosity change trend. In contrast, the DOP of the glassy samples increased from 0.55 to 0.58. Therefore, when analyzing the structure of slag with a higher fluorine content, the high-temperature Raman spectroscopy method is more reliable.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Advanced materials and composites · Iron and Steelmaking Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Volatilisation problems in the measurement of mold fluxes crystallisation by hot thermocouple technique10.1080/03019233.2017.1355583 ↗
2. The role of mold fluxes in continuous casting so simple yet so complex10.2355/isijinternational.43.1479 ↗
3. Effects of the amphoteric behavior of Al2O3 on the structure and properties of CaO–SiO2–Al2O3 melts by molecular dynamics10.1016/j.jnoncrysol.2020.120435 ↗
4. Substitutional effect of Na2O with K2O on the viscosity and structure of CaO-SiO2-CaF2-based mold flux systems10.1111/jace.16456 ↗
5. Melting, viscosity and structure of lithium-free CaO-SiO2 based melt: substituting Li2O with Na2O and B2O310.1016/j.ceramint.2024.11.011 ↗
6. Effects of alkali metal cations and fluoride anions on viscosity and structure of CaO-SiO2-Al2O3 system10.1016/j.jmrt.2022.08.026 ↗
7. Influence mechanism of F− on the structure and properties of aluminate-based mold flux10.1007/s11663-023-02874-6 ↗
8. Amphoteric behavior of component and microstructure feature on CaO-Al2O3-TiO2 ternary melt by molecular dynamics simulation10.1016/j.commatsci.2022.111223 ↗
9. The relationship between crystallization and break temperature of mold flux10.1080/03019233.2018.1552773 ↗
10. Effect of TiO2 content on structure of BaO-CaO-Al2O3-TiO2-Li2O slags by molecular dynamics simulation10.1016/j.jnoncrysol.2022.122084 ↗
11. High temperature Raman spectra of sodium disilicate crystal, glass and its liquid10.1016/S0022-3093(01)00335-0 ↗
12. Quantum chemistry study on superstructure and Raman spectra of binary sodium silicates10.1002/jrs.1287 ↗
13. Effects of temperature on the structures of silicate liquids: 29Si NMR results10.1016/0016-7037(88)90034-8 ↗
14. Temperature dependence of the Raman spectra of Na2Si2O510.1088/0256-307X/18/3/333 ↗
15. Temperature dependent Raman spectra and microstructure of barium metaborate crystals and its melts10.1088/0256-307X/19/2/320 ↗
16. In situ and real-time mold flux analysis using a high-temperature fiber-optic raman sensor for steel manufacturing applications10.1109/JLT.2023.3239428 ↗
17. Effect of elements on peritectic reaction in molten steel based on thermodynamic analysis10.2355/isijinternational.52.1856 ↗
18. Molecular dynamics simulation of the structure and properties of CaO-SiO2-CaF2 slag systems10.1007/s11663-019-01547-7 ↗
19. Theory of the vibrational spectra of some network and molecular glasses10.1103/PhysRevB.11.3173 ↗
20. The structure of high-silica alkali-silicate glasses, a Raman spectroscopy investigation10.1016/0022-3093(83)90032-7 ↗
21. C. Hrmi, The refinement of the crystal structure of cuspidine10.2465/minerj.8.286 ↗
22. Modular mineralogy in the cuspidine group of minerals
23. Electrical conductivity, viscosity and structure of CaO–Al2O3-based mold slags for continuous casting of high-Al steels10.1007/s11663-021-02200-y ↗
24. Room temperature Raman spectroscopy and 29Si MAS NMR combined with high temperature Raman spectroscopy and DFT calculation of xMgO-(1-x) CaO–SiO2 glasses and melts10.1016/j.ceramint.2021.11.029 ↗
25. Structure investigation of CaO-SiO2-Al2O3-Li2O by molecular dynamics simulation and Raman spectroscopy10.1016/j.jnoncrysol.2019.119695 ↗
26. Structurally based assessment of the influence of fluorides on the characteristics of continuous casting powder slags10.1007/s11663-013-9796-x ↗
27. Effect of CaF2 on viscosity, structure and properties of CaO-Al2O3-MgO-SiO2 slag glass ceramics10.1016/j.jnoncrysol.2018.08.018 ↗
28. Effect of Fluorine on Melt Structure for CaO-SiO2-CaF2 and CaO-Al2O3-CaF2 by Molecular Dynamics Simulations10.2355/isijinternational.ISIJINT-2020-002 ↗
29. Investigation on Crystallization of CaO-Al2O3-B2O3-BaO Slag Using Differential Scanning Calorimeter and In Situ High-Temperature Raman Spectroscopy