Laser-based direct energy deposition of compositionally graded titanium alloys: Microstructural evolution, hardness, and tensile properties
Source abstract
Abstract
Laser-based direct energy deposition (DED) technology allows researchers to alter feeding materials while fabricating products and offering opportunities for producing compositionally graded materials such as graded alloys for structural applications. Many graded alloys suffer from their poor tensile properties due to asperities formed at the interface of two materials, arising from microstructural mismatches and varying thermal properties. Towards the load-bearing applications of lightweight dissimilar titanium alloys, we employ the DED method to fabricate a compositionally graded material consisting of the Ti-6Al-4V (TC4) alloy and Ti-6.5Al-3.5Mo-1.5Zr-0.3Si (TC11) alloy. We investigate the effects of heterogeneous microstructure and compositions on the hardness and tensile properties of the graded TC11-TC4 alloy, as well as heat treatment effects, to unveil their microstructure evolution and deformation mechanisms. The smooth change of chemical compositions across the graded TC11-TC4 alloy interface leads to a smooth change of interfacial hardness from ∼320 HV0.3 on the TC4 side to ∼380 HV0.3 on the TC11 side. The as-deposited and heat-treated specimens show comparable yield strength (806–860 MPa), ultimate tensile strength (921–937 MPa), and ductility (7.8–8.6 %) despite different microstructures. We demonstrate a correlation between the microstructural features and micro-deformation mechanisms in each region of the graded Ti-alloy, showing that the graded interfacial region resists plastic strain localization. The micro- and macro-mechanical properties of the graded alloy are associated with the distribution, size, morphology, and orientation of the α and β phases. • Graded TC11-TC4 titanium alloy manufactured using direct energy deposition method. • As-deposited and heat-treated alloys showed superior performance at the interface. • Coherent metallurgical bonding led to a strong graded interface. • Graded chemical composition controlled the phase size and distribution. • Local deformation behavior of phases affected the global mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Current research and development status of dissimilar materials laser welding of titanium and its alloys10.1016/j.optlastec.2020.106090 ↗
2. Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti, and Mg/Ti alloys10.1007/s00170-017-1565-6 ↗
3. A review of dissimilar welding for titanium alloys with light alloys10.1051/metal/2021011 ↗
4. Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology
5. Additive manufacturing of voxelized heterostructured materials with hierarchical phases
6. Microstructure and mechanical properties of a novel functionally graded material from Ti6Al4V to Inconel 625 fabricated by dual wire + arc additive manufacturing10.1016/j.jallcom.2022.163981 ↗
7. Additive manufacturing of functional gradient materials: a review of research progress and challenges10.1016/j.jallcom.2023.172642 ↗
8. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
9. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
10. Additive manufacturing of metals and alloys to achieve heterogeneous microstructures for exceptional mechanical properties10.1080/21663831.2024.2305261 ↗
11. Microstructure and mechanical properties of TiC/Ti6Al4V composite fabricated by concurrent wire-powder feeding laser-directed energy deposition
12. Fabrication of highly heterogeneous precipitate microstructure in an α/β titanium alloy10.1016/j.actamat.2024.120302 ↗
13. The effect of interfacial alloy formation on the mechanical properties of the additively manufactured Ti6Al4V/Ti1Al8V5Fe microstructurally graded material10.1016/j.msea.2024.147484 ↗
14. Thermal analysis and microstructure evolution of TiC/Ti6Al4V functionally graded material by direct energy deposition10.1016/j.msea.2024.146136 ↗
15. Progresses on the additive manufacturing of functionally graded metallic materials10.1016/j.jallcom.2023.170687 ↗
16. Additive manufacturing of functionally graded metallic materials using laser metal deposition
17. Tailoring the coefficient of thermal expansion in a functionally graded material: Al alloyed with Ti-6Al-4V using additive manufacturing10.1016/j.jallcom.2024.176971 ↗
18. Additive manufacturing of steel–copper functionally graded material with ultrahigh bonding strength10.1016/j.jmst.2020.07.044 ↗
19. Laser powder bed fusion of functionally graded bi-materials: role of VC on functionalizing AISI H13 tool steel10.1016/j.matdes.2021.109503 ↗
20. Microstructure and mechanical properties of a graded structural material10.1016/j.msea.2014.06.016 ↗
21. Additive manufacturing of titanium alloy for aircraft components10.1016/j.procir.2015.08.061 ↗
22. Fatigue crack growth behavior of an additively manufactured titanium alloy: effects of spatial and crystallographic orientations of α lamellae10.1016/j.ijplas.2023.103819 ↗
23. Effect of heat treatment on microstructure and mechanical properties of a graded structural material10.1016/j.msea.2014.07.036 ↗
24. A microstructure-based porous crystal plasticity FE model for additively manufactured Ti-6Al-4V alloys10.1016/j.ijplas.2022.103254 ↗
25. High-strain-rate deformation: stress-induced phase transformation and nanostructures in a titanium alloy10.1016/j.ijplas.2023.103707 ↗
26. Effects of laser power on the microstructure evolution and mechanical properties of Ti–6Al–4V alloy manufactured by direct energy deposition10.1007/s12540-021-01081-9 ↗
27. Hierarchical anisotropic material response of directed energy deposited (DED) Ti-6Al-4V alloy10.1016/j.actamat.2024.120080 ↗
28. A comparison on microstructure features, compression property and wear performance of TC4 and TC11 alloys fabricated by multi-wire arc additive manufacturing10.1016/j.jmrt.2024.01.256 ↗
29. A review on additive manufacturing of titanium alloys for aerospace applications: directed energy deposition and beyond Ti-6Al-4V10.1007/s11837-021-04670-6 ↗
30. Microstructural evolution and mechanical properties of laser melting deposited Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy10.1016/S1003-6326(15)63792-X ↗
31. Microstructure and mechanical properties of Ti basic bionic gradient heterogeneous alloy prepared by multi-wire arc additive manufacturing10.1016/j.jallcom.2022.166813 ↗
32. M.A. Kattimani, P.R. Venkatesh, L.J. Kirthan, Functionally Graded Material for Aircraft Turbine Disc on Fatigue Failure—An Overview, in: 2021: pp. 423–440. https://doi.org/10.1007/978-981-15-4779-9_28.10.1007/978-981-15-4779-9_28 ↗
33. Progress in additive manufacturing, additive repair and fatigue evaluation of aviation titanium alloy blades10.1080/21663831.2023.2275599 ↗
34. In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V10.1016/j.msea.2004.08.084 ↗
35. Mechanical properties of TC11 titanium alloy and graphene nanoplatelets/TC11 composites prepared by selective laser melting10.3390/ijms23116134 ↗
36. Tensile deformation behaviors of Ti-6.5Al-3.5Mo-1.5Zr-0.25Si alloy with different percentages of primary α phase10.1016/j.msea.2022.143097 ↗
37. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying10.1016/j.compositesb.2022.110399 ↗
38. Laser aided additive manufacturing of spatially heterostructured steels10.1016/j.ijmachtools.2021.103817 ↗
39. Microstructure evolution mechanism and mechanical properties of TC11-TC17 dual alloy after annealing treatment10.1016/j.jallcom.2020.155874 ↗
40. Unexpected strengthening and toughening effects of B minor alloying in a new low-density near-$α$ titanium alloy10.1016/j.scriptamat.2024.116318 ↗
41. In situ alloying based laser powder bed fusion processing of β Ti–Mo alloy to fabricate functionally graded composites10.1016/j.compositesb.2021.109059 ↗
42. Morphology evolution and growth mechanism of the secondary Widmanstatten α phase in the TA15 Ti-alloy10.1016/j.matchar.2016.05.020 ↗
43. Enhanced tensile ductility of an additively manufactured near-α titanium alloy by microscale shear banding10.1016/j.ijplas.2022.103387 ↗
44. Small-depth nanoindentation studies of an additively manufactured titanium alloy: anisotropic nanomechanical properties and correlation with microscopic mechanical behaviour10.1016/j.mtla.2023.101802 ↗
45. Microstructural characterization of laser melting deposited Ti–5Al-5Mo–5V–1Cr–1Fe near β titanium alloy10.1016/j.jallcom.2013.03.243 ↗
46. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.jmrt.2022.04.055 ↗
47. Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): process, microstructure, and mechanical properties10.1016/j.jallcom.2019.04.255 ↗
48. Effect of Nd addition on microstructure and tensile properties of laser additive manufactured TC11 titanium alloy10.1016/S1003-6326(22)65889-8 ↗
49. Microstructure and mechanical properties of TC4 titanium alloy at the temperature of 77K10.3390/met13061086 ↗
50. Effect of heat treatment on the ratcheting behaviour of additively manufactured and thermo-mechanically treated Ti–6Al–4V alloy10.1016/j.msea.2021.142345 ↗
51. Titanium and its alloys
52. Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing10.1038/s41467-023-43563-x ↗
53. Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti–Nb–Mo–Ta alloys prepared by powder metallurgy10.1016/j.jmrt.2021.12.054 ↗
54. Effect of annealing temperature on microstructure, texture and tensile properties of TA32 sheet10.1016/j.msea.2021.141971 ↗
55. Quantification of α phase strengthening in titanium alloys: crystal plasticity model incorporating α/β heterointerfaces10.1016/j.ijplas.2022.103444 ↗
56. Effects of double annealing on microstructure and mechanical properties of laser melting deposition TA15 titanium alloy
57. Effects of subtransus heat treatments on microstructure features and mechanical properties of wire and arc additive manufactured Ti–6Al–4V alloy10.1016/j.msea.2020.139020 ↗
58. Special interlayer pause strategy for controlling grain morphology and tensile property anisotropy of TC11 alloys fabricated by directed energy deposition technology10.1016/j.msea.2024.146273 ↗
59. Synergistic and competitive mechanisms of plastic anisotropy in high-efficiency laser melting deposited TC11 alloy10.1016/j.msea.2023.145067 ↗
60. Deformation mechanisms in the α phase of the Ti-6Al-2Sn-4Zr-2Mo titanium alloy: in situ experiments and simulations10.1016/j.ijplas.2024.103947 ↗
61. In-situ investigation of plasticity in a Ti-Al-V-Fe (α+β) alloy: Slip mechanisms, strain localization, and partitioning10.1016/j.ijplas.2021.103131 ↗
62. Dense dispersed shear bands in gradient-structured Ni10.1016/j.ijplas.2019.08.012 ↗
63. Remelting-based microstructure engineering in laser powder bed fusion: a case study in 316L stainless steel10.1016/j.scriptamat.2024.116469 ↗
64. Review on dissimilar structures joints failure10.1016/j.engfailanal.2021.105652 ↗
65. Additive manufacturing of functionally graded Ti-Al structures by laser-based direct energy deposition10.1016/j.jmapro.2021.06.068 ↗
66. Experimental analysis and thermodynamic calculations of an additively manufactured functionally graded material of V to Invar 3610.1557/jmr.2018.92 ↗