journal article·2025-01Open access

A comparative evaluation of hot cracking susceptibility of new Ni-based superalloy G27 and Alloy 718

Achmad Ariaseta, Joel Andersson, Olanrewaju Ojo

Abstract

The hot cracking susceptibility of G27, a new superalloy designed for superior mechanical performance relative to Alloy 718, is compared to that of Alloy 718 by Varestraint testing. G27 is found to be more prone to solidification cracking than Alloy 718. Thermodynamic calculations show that G27 has a wider solidification temperature range (STR) and a higher crack susceptibility index (CSI) based on the steepest slope of the temperature vs. square root of the fraction solid (f s ) curve at f s = 0.98. The higher B and Zr contents in G27, compared to Alloy 718, are likely to be the primary factor contributing to the higher cracking susceptibility, as these elements and their interactions show the strongest influence on the calculated STR and CSI compared to the other elements based on the Scheil simulation. Regarding heat-affected zone (HAZ) liquation cracking, G27 also shows greater susceptibility, likely due to its larger resolidification temperature range of HAZ intergranular liquid and a lower fraction of special boundaries compared to Alloy 718. Although G27 is more prone to hot cracking than Alloy 718, the difference in cracking response between the two is relatively modest, making G27 a promising alternative to Alloy 718 due to its superior mechanical properties. • The hot cracking susceptibility of G27 is compared to that of Alloy 718. • G27 is found to be more prone to solidification cracking than Alloy 718. • Regarding liquation cracking, G27 also shows a greater susceptibility. • The difference in the hot cracking susceptibility of the two alloys is discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Additive materials for high temperature applications
2. A New Co-free Ni-Based Alloy for Gas Turbine and Exhaust Valve Applications
3. Zhou · 2024 · 128
4. Recent research progress in the mechanism and suppression of fusion welding-induced liquation cracking of nickel based superalloys10.1007/s12613-024-2869-9 ↗
5. Weldability of new Ni-based superalloy G27: Effect of pre-weld solution annealing on the hot cracking susceptibility
6. Hot cracking in cast alloy 71810.1080/13621718.2018.1429238 ↗
7. A historical perspective on Varestraint testing and the importance of testing parameters
8. Microstructural study of keyhole TIG welded nickel-based superalloy G2710.1016/j.matchar.2023.113178 ↗
9. Characterization of recrystallization and second-phase particles in solution-treated additively manufactured alloy 71810.1007/s11661-019-05560-y ↗
10. T. Otsuka, H. Wakabayashi, D. Igarashi, A. Ariaseta, S. Imano, Y. Wang, S. Kobayashi, M. Takeyama, Effect of Homogenization on Creep of Additive Manufactured Alloy 718, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, Springer, 2018, pp. 501-513. https://doi.org/10.1007/978-3-319-89480-5_32.10.1007/978-3-319-89480-5_32 ↗
11. Ariaseta · 2023 · 807
12. Inconel 718: a solidification diagram10.1007/BF02650300 ↗
13. Lippold · 2015
14. Effect of sulfur on the solidification and segregation in Inconel 718 alloy10.1016/S0167-577X(96)00266-2 ↗
15. Effect of P, S, B and Si on the solidification segregation of inconel 718 alloy10.7449/1994/Superalloys_1994_89_98 ↗
16. The solidification metallurgy of alloy 718 and other Nb-containing superalloys
17. A Study of Effects on Phosphorus, Sulfur, Boron and Carbon on Laves and Carbide Formation in Alloy 71810.7449/1991/Superalloys_1991_81_96 ↗
18. Evaluating susceptibility of Ni-base alloys to solidification cracking by transverse-motion weldability test10.1080/13621718.2020.1802897 ↗
19. A criterion for cracking during solidification10.1016/j.actamat.2015.01.034 ↗
20. A simple index for predicting the susceptibility to solidification cracking
21. D.J. Fisher, W. Kurz, Department of Materials, EPFL-Swiss Institute of Technology Lausanne, Switzerland (Unpublished Research) (1978).
22. Effect of B, Zr, and C on hot tearing of a directionally solidified nickel-based superalloy10.1007/s11661-016-3416-8 ↗
23. Hot tearing in directionally solidified Ni-based superalloys10.7449/2004/Superalloys_2004_727_733 ↗
24. Effect of Zr on microstructure and hot cracking susceptibility of ZGH451 superalloy fabricated by direct energy deposition10.1016/j.jallcom.2023.171371 ↗
25. On the role of Zr and B addition on solidification cracking of IN738LC produced by laser powder bed fusion10.1016/j.mtla.2022.101609 ↗
26. The effects of chemistry variations on hot cracking susceptibility of Haynes® 282® for aerospace applications10.1016/j.matdes.2023.111853 ↗
27. Effect of minor elements on solidification cracking and dilution of alloy 625 powders in laser cladding10.2351/1.4973673 ↗
28. Heat-affected zone cracking in welded nickel superalloys
29. The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys10.1016/S1359-6454(03)00090-9 ↗
30. The relationship between grain size and microfissuring in alloy 718
31. Improvement in laser weldability of INCONEL 738 superalloy through microstructural modification10.1007/s11661-009-9962-6 ↗
32. The effect of heat treatment on microfissuring in alloy 718
33. Enhanced resistance to gas tungsten arc weld heat-affected zone cracking in a newly developed Co-based superalloy10.1016/j.msea.2022.143618 ↗
34. Effect of heat input on heat affected zone cracking in laser welded ATI Allvac 718Plus superalloy10.1016/j.msea.2006.11.054 ↗
35. Grains, phases, and interfaces: An introduction of microstructure
36. B.B. Rath, Formation of annealing twins in fcc crystals10.1016/S1359-6454(96)00336-9 ↗
37. Study of annealing twins in FCC metals and alloys10.1007/BF02647209 ↗