Microstructure and fracture behavior of multi-elements strengthened CoCrNi alloy produced by laser-directed energy deposition
Source abstract
Abstract
Addition of single non-constituent element to strengthen equiatomic CoCrNi alloy has proven effective but faces limitations due to the solubility constraints of these additives. Excessive addition of single element causes the precipitation of brittle phases and deteriorates the mechanical properties of CoCrNi alloy. This study investigates the phase composition and mechanical properties of CoCrNi alloy strengthened by more than two elements simultaneously. Using laser-directed energy deposition (LDED), a series of CoCrNi(Al0.6TiFe)x alloys were rapidly fabricated by feeding both CoCrNi and CoCrNiAl0.6TiFe powders simultaneously. Microstructural analysis revealed cellular structures in all alloys, with coarsening observed at higher additive contents. Besides, increasing Al, Ti, Fe content in the alloy led to the precipitation of a BCC phase at cellular boundaries, causing stress concentration and resulting in a transition from ductile fracture to cleavage fracture. Among these alloys, one deposited with 70 % CoCrNi and 30 % CoCrNiAl0.6TiFe powders, exhibited remarkable mechanical properties, with a yield strength of 689.3 MPa, ultimate tensile strength of 1004.3 MPa, and elongation of 30.2 %, representing a 41.8 % increase in yield strength compared to the CoCrNi alloy. The improved properties are attributed to a high initial dislocation density of 2.50 × 1015 m−2 caused by the high solubility of Al, Ti, and Fe elements about 14.82 at%. These findings highlight a novel strategy for developing high-performance alloys by incorporating multiple non-constituent elements via LDED.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
2. Enhanced high-temperature oxidation resistance of low-cost Fe–Cr–Ni medium entropy alloy by Ce-adulterated10.1016/j.jmrt.2021.12.087 ↗
3. Cantor-derived medium-entropy alloys: bridging the gap between traditional metallic and high-entropy alloys10.1016/j.jmrt.2022.01.118 ↗
4. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
5. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
6. Unraveling dual phase transformations in a CrCoNi medium-entropy alloy10.1016/j.actamat.2021.117112 ↗
7. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
8. Mechanism of radiation damage reduction in equiatomic multicomponent single phase alloys10.1103/PhysRevLett.116.135504 ↗
9. Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys10.1038/ncomms13564 ↗
10. Ultra-high tensile strength nanocrystalline CoCrNi equi-atomic medium entropy alloy processed by high-pressure torsion10.1016/j.msea.2018.08.079 ↗
11. Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing10.1016/j.scriptamat.2019.01.016 ↗
12. Exceptional cryogenic strength-ductility synergy in Al0.3CoCrNi medium-entropy alloy through heterogeneous grain structure and nano-scale precipitates10.1016/j.msea.2019.138372 ↗
13. Achieving high strength and high ductility in Al0.3CoCrNi medium-entropy alloy through multi-phase hierarchical microstructure10.1016/j.mtla.2019.100442 ↗
14. Microalloyed medium-entropy alloy (MEA) composite nanolattices with ultrahigh toughness and cyclability10.1016/j.mattod.2020.10.003 ↗
15. Local lattice distortion in NiCoCr, FeCoNiCr and FeCoNiCrMn concentrated alloys investigated by synchrotron X-ray diffraction10.1016/j.matdes.2018.05.056 ↗
16. Corrigendum to ‘Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction’ [Acta Mater. 154C (2018) 79–89]10.1016/j.actamat.2018.10.010 ↗
17. Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off10.1016/j.matdes.2020.109202 ↗
18. Effects of tungsten additions on the microstructure and mechanical properties of CoCrNi medium entropy alloys10.1016/j.jallcom.2019.03.235 ↗
19. Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: Experiments and first-principle calculations10.1016/j.jmst.2020.04.062 ↗
20. Heterogeneous banded precipitation of (CoCrNi)93Mo7 medium entropy alloys towards strength–ductility synergy utilizing compositional inhomogeneity10.1016/j.scriptamat.2019.07.026 ↗
21. Origin of strong solid solution strengthening in the CrCoNi-W medium entropy alloy10.1016/j.jmst.2020.08.058 ↗
22. On the formation of hierarchical microstructure in a Mo-doped NiCoCr medium-entropy alloy with enhanced strength-ductility synergy10.1016/j.scriptamat.2019.08.036 ↗
23. Tailoring grain growth and solid solution strengthening of single-phase CrCoNi medium-entropy alloys by solute selection10.1016/j.jmst.2020.02.073 ↗
24. Investigation of plastic strain accommodation and recrystallization behavior in CoCrNiCu medium-entropy alloy10.1016/j.matlet.2019.06.084 ↗
25. Phase separation and its effect on atomic interactions in CoCrNiCu medium-entropy alloys10.1016/j.matlet.2019.126528 ↗
26. Effects of Mo-doping on the microstructure and mechanical properties of CoCrNi medium entropy alloy10.1557/jmr.2020.256 ↗
27. Effects of Nb additions on structure and mechanical properties evolution of CoCrNi medium-entropy alloy10.1166/mex.2019.1506 ↗
28. Preparation and properties of medium entropy CoCrNi/boride metal matrix composite10.1016/j.jallcom.2018.03.204 ↗
29. Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility10.1016/j.scriptamat.2019.12.007 ↗
30. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy10.1016/j.msea.2020.139242 ↗
31. Mechanical behavior in boron-microalloyed CoCrNi medium-entropy alloy studied by in situ high-energy X-ray diffraction10.1016/j.msea.2020.139600 ↗
32. Enhanced strength and ductility of a tungsten-doped CoCrNi medium-entropy alloy10.1557/jmr.2018.247 ↗
33. Nitrogen strengthening of a stable austenitic stainless steel10.1016/0001-6160(87)90131-3 ↗
34. Nucleation and precipitation kinetics of M23C6 and M2N in an Fe–Mn–Cr–C–N austenitic matrix and their relationship with the sensitization phenomenon10.1016/j.actamat.2011.06.038 ↗
35. An AES and XPS study of the high alloy austenitic stainless steel 254 SMO® tested in a ferric chloride solution10.1016/0010-938X(94)90115-5 ↗
36. Significant improvement the mechanical properties of CoCrNi alloy by tailoring a dual FCC-phase structure
37. Effect of Al on microstructure and mechanical properties of cast CrCoNi medium-entropy alloy10.1007/s41230-018-8031-4 ↗
38. Anisotropic microstructure, properties and molecular dynamics simulation of CoCrNi medium entropy alloy fabricated by laser directed energy deposition10.1016/j.msea.2023.144834 ↗
39. Cracks suppression strategies for CoCrNi medium entropy alloy fabricated by laser directed energy deposition10.1016/j.matdes.2022.111579 ↗
40. Strength-ductility synergy of CoCrNi medium-entropy alloy processed with laser powder bed fusion10.1016/j.matdes.2022.110774 ↗
41. Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure10.1016/j.msea.2021.141545 ↗
42. Exceptional strength-ductility synergy of additively manufactured CoCrNi medium-entropy alloy achieved by lattice defects in heterogeneous microstructures10.1016/j.jmst.2022.03.024 ↗
43. In-situ tailoring microstructures to promote strength-ductility synergy in laser powder bed fusion of NiCoCr medium-entropy alloy
44. Excellent combination of strength and ductility of CoCrNi medium entropy alloy fabricated by laser aided additive manufacturing
45. Stacking fault energy analyses of additively manufactured stainless steel 316L and CrCoNi medium entropy alloy using in situ neutron diffraction10.1038/s41598-020-58273-3 ↗
46. High strength and ductility of an additively manufactured CrCoNi medium-entropy alloy achieved by minor Mo doping10.1016/j.msea.2022.143129 ↗
47. Structure and mechanical properties of a FeCoCrNi high-entropy alloy fabricated via selective laser melting10.1016/j.intermet.2020.106963 ↗
48. Strength-ductility synergy of additively manufactured (CoCrNi)87Al13 medium entropy alloy with heterogeneous multiphase microstructure10.1016/j.scriptamat.2022.115016 ↗
49. Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method10.1016/j.intermet.2018.01.021 ↗
50. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.mseb.2009.05.024 ↗
51. Corrosion and thermal behaviour of AlCr1.5CuFeNi2Tix high-entropy alloys
52. Additive manufacturing of metals: Microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
53. On the strength and fracture toughness of an additive manufactured CrCoNi medium-entropy alloy10.1016/j.actamat.2023.119249 ↗
54. Additively manufactured heterogeneous precipitation-strengthened high-entropy alloys with high strength and ductility
55. Microstructure evolution and compressive property variation of Al CoCrFeNi high entropy alloys produced by directional solidification10.1016/j.intermet.2022.107749 ↗
56. Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design10.1557/jmr.2013.211 ↗
57. First-principles analysis of the grain boundary segregation of transition metal alloying elements in γFe10.1016/j.commatsci.2021.111050 ↗
58. Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel10.1016/j.scriptamat.2023.115568 ↗
59. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
60. Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
61. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
62. A D019 precipitate strengthened laser additively manufactured V and Nb bearing CoCrFeNi based high entropy alloys10.1016/j.matdes.2023.112464 ↗
63. Excellent mechanical properties and strengthening mechanisms in ultrathin foils of CoCrNi medium-entropy alloy via accumulative rolling10.1016/j.jmrt.2023.12.101 ↗
64. The effect of local atomic configuration in high-entropy alloys on the dislocation behaviors and mechanical properties10.1016/j.msea.2021.141253 ↗
65. Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys10.1016/j.scriptamat.2017.06.014 ↗