Effect of pure Cu foil interlayer on the microstructure and mechanical behavior of Mg/Al composite sheet
Source abstract
Abstract
In this study, a Mg/Al composite sheet containing an ultrathin Cu foil interlayer was successfully fabricated by single-pass hot roll bonding. The influence of Cu foil on microstructure, mechanical properties and deformation behavior of Mg/Al composite sheet were investigated. The results show that the Mg/Al-Cu sheet exhibits a good interfacial bonding, and there is no obvious intermetallic compounds (IMCs) formation at the interface. The Cu foil is beneficial to refine the average grain size of the Mg layer and weaken the texture orientation intensity of the Mg and Al layers in the Mg/Al-Cu sheet. The Mg/Al-Cu sheet exhibits similar yield strength and ultimate tensile strength to the Mg/Al sheet, but with a significantly higher elongation of 17.3 %. Furthermore, the interfacial shear strength of Mg/Al-Cu sheet is significantly lower than that of the Mg/Al sheet, primarily due to the extensive formation of CuO on the surface of the Cu foil during the rolling process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Research advances of magnesium and magnesium alloys worldwide in 202210.1016/j.jma.2023.07.011 ↗
2. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
3. Applications of magnesium alloys for aerospace: A review10.1016/j.jma.2023.09.015 ↗
4. Bonding of dissimilar metals in the interlayer region in Al-based composites: molecular dynamics10.3390/sym15020328 ↗
5. In-situ investigation of crack initiation and propagation in roll-bonded five-ply ASS/Al/Mg/Al/ASS laminated composites during tensile test10.1016/j.jallcom.2019.153608 ↗
6. Interfacial fracture characteristics of Mg/Al composite plates with different thickness ratios by asymmetrical rolling with differential temperature rolls10.1016/j.msea.2023.144764 ↗
7. Predicting and controlling interfacial microstructure of magnesium/aluminum bimetallic structures for improved interfacial bonding10.1016/j.jma.2020.03.004 ↗
8. Mechanical behavior of a Mg/Al composite rod containing a soft Mg sleeve and an ultra hard Al core10.1016/j.msea.2016.08.069 ↗
9. Research on corrugated interface formation mechanism and mechanical properties of the CFR flat Mg/Al clad plate10.1016/j.jmrt.2023.08.053 ↗
10. Hot-rolling process and properties of large thickness ratio Al/Mg/Al laminates10.1016/S1003-6326(23)66359-9 ↗
11. Experimental and numerical study of microstructure, mechanical characteristics, and forming limit curve for Al 1050/ Mg-AZ31B two-layer sheets manufactured via roll bonding technique10.1016/j.jallcom.2023.169059 ↗
12. Response mechanism of matrix microstructure evolution and mechanical behavior to Mg/Al composite plate by hard-plate accumulative roll bonding10.1016/j.jmrt.2023.01.227 ↗
13. Corrugated interface structure and formation mechanism of Al/Mg/Al laminate rolled by hard plate10.1016/S1003-6326(23)66164-3 ↗
14. Improving mechanical properties of AZ91D magnesium/A356 aluminum bimetal prepared by compound casting via a high velocity oxygen fuel sprayed Ni coating10.1016/j.jma.2021.02.002 ↗
15. Effect of vibration on interfacial microstructure and mechanical properties of Mg/Al bimetal prepared by a novel compound casting10.1016/j.jma.2021.11.023 ↗
16. Development of high strength Mg/Al bimetal by a novel ultrasonic vibration aided compound casting process10.1016/j.jmatprotec.2021.117441 ↗
17. Microstructure, mechanical properties and corrosion resistance of A356 aluminum/AZ91D magnesium bimetal prepared by a compound casting combined with a novel Ni-Cu composite interlayer10.1016/j.jmatprotec.2020.116874 ↗
18. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer10.1016/j.matdes.2014.09.020 ↗
19. Weld microstructure and mechanical properties in ultrasonic enhanced friction stir welding of Al alloy to Mg alloy10.1016/j.jmatprotec.2017.11.031 ↗
20. Microstructure, mechanical properties, and corrosion resistance of an explosively welded Mg–Al composite10.1016/j.jma.2021.08.009 ↗
21. Influence of multi-pass rolling and subsequent annealing on the interface microstructure and mechanical properties of the explosive welding Mg/Al composite plates10.1016/j.msea.2018.03.042 ↗
22. Microstructure and mechanical behavior of a Mg AZ31/Al 7050 laminate composite fabricated by extrusion10.1016/j.msea.2015.05.094 ↗
23. Microstructure and Mechanical Behavior of Mg-Based Bimetal Plates with High Formability Sleeve by Co-extrusion10.1007/s40195-023-01567-y ↗
24. EBSD research on the interfacial microstructure of the corrugated Mg/Al laminated material10.1016/j.jmrt.2020.03.111 ↗
25. An innovative and flexible approach to fabricate Mg/Al composite plates: Cold spraying and hot rolling post-treatment10.1016/j.msea.2022.143515 ↗
26. Microstructural evolutions and mechanical characteristics of roll-bonding Mg/Al clad plate regulated by cold spraying micron particle interlayer10.1016/j.msea.2023.145153 ↗
27. Microstructure; bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling10.1016/j.msea.2010.10.105 ↗
28. Microstructure and mechanical properties of Mg-to-Al dissimilar welded joints with an Ag interlayer using ultrasonic spot welding10.1016/j.jma.2020.04.001 ↗
29. In-situ investigation of deformation behavior and fracture forms of Ti/Al/Mg/Al/Ti laminates10.1016/S1003-6326(21)65605-4 ↗
30. Design guideline for intermetallic compound mitigation in Al-Mg dissimilar welding through addition of interlayer10.1007/s00170-017-1038-y ↗
31. Evolution of interface microstructure of rolled Al-Mg composite plate implanted with Er powder
32. Effects of annealing temperature on the interfacial microstructure and bonding strength of Cu/Al clad sheets produced by twin-roll casting and rolling10.1016/j.jmatprotec.2020.116804 ↗
33. Texture characteristics and tensile deformation behavior of Cu/Al layered composites prepared by cast-rolling method10.1016/j.jmrt.2024.01.164 ↗
34. The synergetic tensile deformation behavior of Cu/Al laminated composites prepared by twin-roll casting technology10.1088/2053-1591/aae630 ↗
35. Interface enhancement mechanism of rolled Mg/Al clad plate with particle interface control10.1016/j.jma.2024.06.013 ↗
36. The evolution of coarse grains and its effects on weakened basal texture during annealing of a cold-rolled magnesium AZ31B alloy10.1016/j.jma.2021.08.026 ↗
37. Microstructure and mechanical behavior of Mg ZK60/Al 1100 composite plates fabricated by co-extrusion10.1016/j.jallcom.2020.155676 ↗
38. Microstructure and mechanical behavior of Mg/Al composite plates with different thicknesses of Ti foil interlayer