Additive manufacturing of sustainable and heat-resistant Al-Fe-Mo-Si-Zr alloys

Improving the sustainability of metals and alloys is essential for slowing down global warming. The reason is that their extraction and production stand for about 40 % of all greenhouse gas emissions in the industrial sector. This motivates new alloy design and processing criteria such as the (1) preferred use of abundant and sustainable alloying elements and (2) improved material tolerance against impurity intrusion from recycling. In this context, additive manufacturing (AM) is attractive, through rapid solidification, capable of quenching impurities into a solid solution state, avoiding formation of large intermetallics and introduction of metastable phases. Here, by using this approach we show how iron, an important scrap-related contaminant in aluminum alloys, can be turned from a harmful into a valuable ingredient. Specifically, the addition of Mo and Si facilitates the formation of beneficial metastable body-centred cubic (BCC) Al ₁₂(Fe, Mo) ₃Si phase, instead of more stable but detrimental intermetallic variants commonly observed in Al-Fe alloys. The as-built microstructures have excellent thermal stability, tested up to 200 hours at 300 °C, because of low diffusivity of Fe and the formation of Zr shell. We find that for such supersaturated alloys, two issues are important, namely (a) the heterogeneous microstructures in the as-built condition, (b) the evolution of metastable precipitates during heating. We suggest that this type of approach help to guide sustainable alloy design via AM and other rapid solidification processes.