Fe/Cl/N triply-doped bamboo-like structure wrapped with Fe3C nanoparticles for electrochemical selective nitrite detection
Source abstract
Abstract
Nitrite is commonly found in the natural environment and in everyday human activities. However, excessive nitrite consumption can potentially harm human health. Consequently, it is crucial to develop a reliable and sensitive method for nitrite detection. In this work, trichloroacetic acid functionalized Cl-Fe-MIL-88B metal-organic framework is obtained through nucleophilic reaction between animated Fe-MIL-88B and trichloroacetic acid, which is then annealed with melamine in an N 2 atmosphere to produce the Fe/Cl/N triply-doped bamboo-like carbon nanotubes (CNTs) wrapped with Fe 3C nanoparticles. Owing to the effective doping of Fe/Cl/N elements, the charge distribution and chemical activity of the bamboo-like structure are tailored, greatly improving the conductivity and facilitating electron transfer of the composite for potential electrocatalytic reaction. The Fe 3C nanoparticles wrapped inside the CNTs contribute to expose more active sites and provide effective surface area. Accordingly, the Fe/Cl/N doped bamboo-like structure modified glassy carbon electrode shows excellent electrochemical nitrite sensing properties with a high sensitivity of 1060 µA cm −2 mM −1, a low detection limit of 0.61 µM in a wide linear concentration range of 5–5000 μM, as well as good anti-interference and long-term stability. Also, the electrochemical sensor has a satisfactory recovery rate for detecting nitrite ions in spiked milk samples. This work proposes a simple precursor chlorination and pyrolysis strategy to obtain metal-filled bamboo-like structure with high electrical conductivity and electrocatalytic properties, endowing great potential in food safety and environment monitoring.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced biosensing and bioanalysis techniques · Conducting polymers and applications · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Silver-miang nanocomposites: a green, rapid and simple approach for selective determination of nitrite in water and meat samples10.1016/j.microc.2020.105879 ↗
2. Development and validation of an ionic chromatography method for nitrite determination in processed foods and estimation of daily nitrite intake in Korea10.1016/j.foodchem.2022.132280 ↗
3. Selective hydrogenation of nitrate in water over Cu–Pd/mordenite10.1016/j.apcatb.2005.12.012 ↗
4. Coupling diazotization with oxidase-mimetic catalysis to realize dual-mode double-ratiometric colorimetric and electrochemical sensing of nitrite
5. Nitrite electrochemical biosensing based on coupled graphene and gold nanoparticles10.1016/j.bios.2013.08.007 ↗
6. A palm-sized wireless device for colorimetric nitrite determination in water10.1016/j.microc.2022.108138 ↗
7. Ultrasensitive, specific, and rapid fluorescence turn-on nitrite sensor enabled by precisely modulated fluorophore binding
8. Nitrogen cycling in natural waters using in situ, reagentless UV spectrophotometry with simultaneous determination of nitrate and nitrite10.1021/es071447b ↗
9. Simultaneous determination of nitrite and nitrate in dew, rain, snow and lake water samples by ion-pair high-performance liquid chromatography10.1016/j.talanta.2006.02.034 ↗
10. A portable integrated electrochemical sensing system for on-site nitrite detection in food
11. Atomically dispersed ruthenium species inside metal-organic frameworks: combining the high activity of atomic sites and the molecular sieving effect of MOFs10.1002/anie.201814182 ↗
12. Layered 2D MOF nanosheets grown on CNTs substrates for efficient nitrite sensing
13. Structure defect tuning of metal-organic frameworks as a nanozyme regulatory strategy for selective online electrochemical analysis of uric acid10.1021/acsami.1c17974 ↗
14. MOF-derived Co3O4/FeCo2O4 incorporated porous biomass carbon: simultaneous electrochemical determination of dopamine, acetaminophen and xanthine10.1016/j.jallcom.2020.157701 ↗
15. Recent trends and perspectives in electrochemical sensors based on MOF-derived materials10.1039/D1TC02025K ↗
16. Principles of design and synthesis of metal derivatives from MOFs
17. MOF-derived Co3O4/FeCo2O4 incorporated porous biomass carbon: simultaneous electrochemical determination of dopamine, acetaminophen and xanthine10.1016/j.jallcom.2020.157701 ↗
18. Molecularly imprinted electrochemical sensor based on biomass carbon decorated with MOF-derived Cr2O3 and silver nanoparticles for selective and sensitive detection of nitrofurazone10.1016/j.cej.2020.125664 ↗
19. Facile synthesis of bamboo-like Ni3S2@NCNT as efficient and stable electrocatalysts for non-enzymatic glucose detection10.1016/j.apsusc.2022.152683 ↗
20. Metal-organic framework-induced construction of actiniae-like carbon nanotube assembly as advanced multifunctional electrocatalysts for overall water splitting and Zn-air batteries10.1016/j.nanoen.2017.07.043 ↗
21. Enhancing nitrogen electroreduction to ammonia by doping chlorine on reduced graphene oxide10.1021/acscatal.0c03941 ↗
22. Environmental application of chlorine-doped graphitic carbon nitride: continuous solar-driven photocatalytic production of hydrogen peroxide10.1016/j.jhazmat.2022.129251 ↗
23. Nitrogen/chlorine-doped carbon nanodisk-encapsulated hematite nanoparticles for high-performance lithium-ion storage10.1016/j.jallcom.2020.156045 ↗
24. Facile fabrication of CuO nanoparticles embedded in N-Doped carbon nanostructure for electrochemical sensing of dopamine10.1155/2022/6482133 ↗
25. Magnetically separable Fe-MIL-88B-NH2 carbonaceous nanocomposites for efficient removal of sulfamethoxazole from aqueous solutions10.1016/j.jcis.2020.02.116 ↗
26. General oriented formation of carbon nanotubes from metal-organic frameworks10.1021/jacs.7b01942 ↗
27. Bamboo-like nitrogen-doped carbon supported chlorine-doped Fe2P as an antibacterial oxygen reduction catalyst10.1039/D4NR00133H ↗
28. Visible-light-induced selective oxidation of amines into imines over UiO-66-NH2@Au@COF core-shell photocatalysts10.1021/acssuschemeng.1c04112 ↗
29. Adsorption of fluoride to UiO-66-NH2 in water: stability, kinetic, isotherm and thermodynamic studies10.1016/j.jcis.2015.08.061 ↗
30. Simultaneous manipulation of constituent and structure toward MOFs-derived hollow Co3O4/Co/NC@MXene microspheres via pyrolysis strategy for high-performance microwave absorption
31. Enhanced dielectric and mechanical properties in chlorine-doped continuous CNT sheet reinforced sandwich polyvinylidene fluoride film10.1016/j.carbon.2016.05.068 ↗
32. Conversion of CO2 to defective porous carbons in one electro-redox cycle for boosting electrocatalytic H2O2 production10.1016/j.apcatb.2022.121161 ↗
33. Rich nitrogen-doped carbon on carbon nanotubes for high-performance sodium-ion supercapacitors10.1016/j.jpowsour.2020.228104 ↗
34. The Mott-Schottky Co2P/Co heterocatalyst encapsulated by N, P-doped graphene/carbon nanotubes as high-efficiency trifunctional electrocatalysts for cable-type flexible Zn–air batteries and water splitting10.1039/D3TA05029G ↗
35. Assembling pore-rich FeP nanorods on the CNT backbone as an advanced electrocatalyst for oxygen evolution10.1039/C6TA05317C ↗
36. Simultaneously improving the fire safety and mechanical properties of epoxy resin with Fe-CNTs via large-scale preparation10.1039/C7TA10961J ↗
37. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
38. Electrochemical synergies of Fe-Ni bimetallic MOF CNTs catalyst for OER in water splitting10.1016/j.jallcom.2020.156583 ↗
39. CuFeN/CNT composite derived from kinetically modulated urchin-shaped MOF for highly efficient OER catalysis
40. Influence of modified biochar supported Fe–Cu/polyvinylpyrrolidone on nitrate removal and high selectivity towards nitrogen in constructed wetlands10.1016/j.envpol.2021.117812 ↗
41. Conjugated conducting polymers PANI decorated Bi12O17Cl2 photocatalyst with extended light response range and enhanced photoactivity10.1016/j.apsusc.2018.09.103 ↗
42. Tuning the acid/base properties of nanocarbons by functionalization via amination10.1021/ja910169v ↗
43. From biochar to functions: Lignin induced formation of Fe3C in carbon/Fe composites for efficient adsorption of tetracycline from wastewater10.1016/j.seppur.2022.122217 ↗
44. Constructing three-phase heterojunction with 1D/3D hierarchical structure as efficient trifunctional electrocatalyst in alkaline seawater10.1002/adfm.202205767 ↗
45. CNTs/ferrihydrite as a highly efficient heterogeneous Fenton catalyst for the degradation of bisphenol A: the important role of CNTs in accelerating Fe(III)/Fe(II) cycling10.1016/j.apcatb.2020.118891 ↗
46. Bifunctional electrocatalysts for overall water splitting from an Iron/Nickel-based bimetallic metal-organic framework/dicyandiamide composite10.1002/anie.201803136 ↗
47. Selective etching of nitrogen-doped carbon by steam for enhanced electrochemical CO2 reduction10.1002/aenm.201701456 ↗
48. Transformation of postsynthesized F-MOF to Fe/N/F-tridoped carbon nanotubes as oxygen reduction catalysts for high power density Zn-air batteries
49. A novel electrochemical sensor based on CuO/H-C3N4/rGO nanocomposite for efficient electrochemical sensing nitrite10.1016/j.jallcom.2019.05.137 ↗
50. Electrochemical sensors for nitrogen species: A review
51. Fabrication of porous nickel (II)-based MOF@carbon nanofiber hybrid mat for high-performance non-enzymatic glucose sensing10.1016/j.mssp.2022.106500 ↗
52. Carbon spheres decorated with Fe2O3/Fe3C/Fe composite nanoparticles for highly sensitive and selective electrochemical determination of nitrite (NO2-)
53. A highly sensitive electrochemical sensor for nitrite detection based on Fe2O3 nanoparticles decorated reduced graphene oxide nanosheets10.1016/j.apcatb.2013.10.044 ↗
54. Hollow Fe2O3 polyhedrons: one-pot synthesis and their use as electrochemical material for nitrite sensing10.1016/j.electacta.2011.10.039 ↗
55. Fe3O4 nanospheres on MoS2 nanoflake: electrocatalysis and detection of Cr (VI) and nitrite10.1016/j.jelechem.2015.12.004 ↗
56. Highly sensitive detection of nitrite by using gold nanoparticle-decorated α-Fe2O3 nanorod arrays as self-supporting photo-electrodes10.1039/C9QI00176J ↗
57. Mesoporous carbon/α-Fe2O3 nanoleaf composites for disposable nitrite sensors and energy storage applications10.1021/acsomega.0c02594 ↗
58. Inkjet-printed porphyrinic metal-organic framework thin films for electrocatalysis10.1039/C6TA03547G ↗
59. Synthesis of porphyrin-based two-dimensional metal-organic framework nanodisk with small size and few layers10.1039/C7TA07911G ↗
60. Two-dimensional conductive phthalocyanine-based metal-organic frameworks for electrochemical nitrite sensing10.1039/D0RA10522H ↗
61. Electrochemical sensor for sensitive nitrite and sulfite detection in milk based on acid-treated Fe3O4@SiO2 nanoparticles10.1016/j.foodchem.2023.137004 ↗