Structure and mechanical properties of consolidated billets from recycled chip wastes of cast metal matrix composites of the Al-Si-SiC system
Source abstract
Abstract
This study examines the structure and mechanical properties of billets produced via hot pressing from ball-milled chips of Al-Si-SiC metal matrix composites. The chips, derived from cast composites, were subjected to high-energy ball milling to obtain powder, which was then consolidated by hot pressing at 450 °C. The findings reveal that machining reduces the average size of SiC particles from 41.9 to 12.9 µm, and ball milling further reduces it to 5.9 µm. Powder-pressed billets exhibited a more homogeneous SiC distribution and showed ∼1.9 times higher hardness than the cast material, while chip-pressed billets showed only a ∼13 % increase. Compression tests indicated the highest yield strength of 333 ± 7 MPa in powder-pressed samples, compared to 225 ± 6 MPa in the cast state and 143 ± 26 MPa in chip-pressed samples. However, powder-pressed samples had lower ductility (∼3 %) than cast and chip-pressed samples. The influence of hot pressing temperature (350–500 °C) on the structure and mechanical properties was also explored, showing that higher temperatures improve silicon distribution but slightly reduce hardness and yield strength. Recycled composite materials from chip waste are promising for producing consolidated billets, especially for small-sized components in machinery and instrument engineering.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Bauxite Residue and Utilization · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Environmental-techno-economic analysis of decarbonization strategies for the Indian aluminum industry10.1016/j.enconman.2022.116455 ↗
2. Challenges in metal recycling10.1126/science.1217501 ↗
3. Improving aluminum recycling: a survey of sorting and impurity removal technologies10.1016/j.resconrec.2011.10.010 ↗
4. A review of secondary aluminum production and its byproducts10.1007/s11837-021-04802-y ↗
5. Hazardous aluminum dross characterization and recycling strategies: a critical review10.1016/j.jenvman.2018.06.068 ↗
6. Preparation and melting of scrap in aluminum recycling: a review10.3390/met8040249 ↗
7. Industrialization of cast aluminum matrix composites (AMCCs)10.1081/AMP-100108625 ↗
8. Metal matrix composites10.1146/annurev-matsci-070909-104511 ↗
9. Degradation of SiC particles in aluminium-based composites10.1007/BF01151086 ↗
10. Prediction of Si contents to suppress the interfacial reaction in the SiCp/2014 Al composite10.1016/S1359-6454(97)00465-5 ↗
11. Fatigue life and microstructure after multiple remelting of A359 matrix composites reinforced with SiC particles10.1515/amm-2016-0340 ↗
12. Strategies for improving the sustainability of structural metals10.1038/s41586-019-1702-5 ↗
13. Influence of repeated remeltings on formation of structure of castings from aluminum matrix composite alloys
14. Thermodynamics of the effect of alloying of phase formation during crystallization of aluminum matrix composites with exogenous reinforcement10.3103/S106782122206013X ↗
15. Thermal cleaning and melting of fine aluminium alloy chips10.24425/afe.2020.133353 ↗
16. Review of solid state recycling of aluminum chips10.1016/j.resconrec.2017.06.004 ↗
17. Friction stir consolidation of aluminum machining chips10.1007/s00170-017-1016-4 ↗
18. Sustainability study of a new solid-state aluminum chips recycling process: a life cycle assessment approach10.3390/su151411434 ↗
19. Evolutionary in solid state recycling techniques of aluminium: a review10.1016/j.procir.2016.01.117 ↗
20. Recycling of aluminium alloy and aluminium matrix composite chips by pressing and hot extrusion10.1016/S0924-0136(03)00380-7 ↗
21. Solid state recycling of aluminum alloy chips via pulsed electric current sintering
22. The evolution of the microstructure and properties of ageable Al-Si-Zn-Mg alloy during the recycling of milling chips through powder metallurgy10.1016/j.jmrt.2020.08.045 ↗
23. Microstructures and characteristics of solid state recycling aluminium chips AA6061/Al-SiC composites fabricated by cold compaction method10.1063/1.4983586 ↗
24. Al-SiC metal matrix composite production through friction stir extrusion of aluminum chips10.1016/j.proeng.2017.10.798 ↗
25. Microstructure and properties of AA7075/Al-SiC composites fabricated using powder metallurgy and hot pressing10.1016/j.powtec.2014.08.016 ↗
26. Environmental assessment of solid state recycling routes for aluminium alloys: can solid state processes significantly reduce the environmental impact of aluminium recycling?10.1016/j.cirp.2015.04.051 ↗
27. Solid-phase recycling of non-compact waste of cast metal-matrix composites10.1007/s11015-024-01665-x ↗
28. Formation of the structure and phase composition of cast aluminum matrix composites during multiple remelting10.3103/S1067821222060128 ↗
29. Research of the mechanism and development of the wear model of a diamond tool when turning aluminum-matrix composite materials10.3103/S1068366617050142 ↗
30. Effect of the thermomechanical treatment conditions on the consolidation, the structure, and the mechanical properties of bulk Al–Mg–C nanocomposites10.1134/S0036029518070029 ↗
31. Proper matrix-reinforcement bonding in cast metal matrix composites as a factor of their good quality10.1016/j.acme.2015.11.004 ↗
32. Casting defects and properties of cast A356 aluminium alloy reinforced with SiC particles10.1016/0266-3538(93)90095-X ↗
33. The solidification microstructure of particulate reinforced aluminium/SiC composites10.1016/0266-3538(89)90093-6 ↗
34. The evolution of the microstructure and properties of ageable Al-Si-Zn-Mg alloy during the recycling of milling chips through powder metallurgy10.1016/j.jmrt.2020.08.045 ↗
35. Solid-state recycling of aluminium alloy swarf into c-channel by hot extrusion10.1016/j.jmapro.2014.10.002 ↗
36. Microstructural, mechanical, and wear properties characterization and strengthening mechanisms of Al7075/SiCnp composites processed through ultrasonic cavitation assisted stir-casting10.1016/j.msea.2020.140553 ↗
37. Processing and evaluation of nano SiC reinforced aluminium composite synthesized through ultrasonically assisted stir casting process10.1016/j.jmrt.2023.05.030 ↗
38. Increasing the recycling percent in liquid-state recycling of Al machining chips by friction stir processing10.1016/j.matchemphys.2020.122627 ↗
39. Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites10.1016/j.matdes.2013.08.049 ↗
40. The effect of thermomechanical parameters on the eutectic silicon characteristics in a non-modified cast A356 aluminum alloy10.1016/j.msea.2012.04.010 ↗
41. Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite10.1016/j.msea.2019.03.037 ↗
42. Combined effect of particle reinforcement and T6 heat treatment on the compressive deformation behavior of an A357 aluminum alloy at room temperature and at 350 °C10.3390/cryst14040317 ↗
43. Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route10.1016/j.jmrt.2022.02.094 ↗