journal article·2024-12

Study on the structure and friction properties of NCG/WS2 copper-based self-lubricating composites

Hao Li, Yongdu Li, Jiayao Liu, Jia Xu, Xianju Zhang, Mei Yang

Publisher page

Abstract

In this study, Cu-matrix composites incorporating Ni-coated graphite and WS 2 were synthesized using the discharge plasma sintering (SPS) method. X-ray diffraction analysis (XRD) and infrared Raman spectroscopy were employed for the physical phase analysis of the composites while scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) were utilized to examine and analyze the morphology and composition of the composite surfaces. The findings revealed that substituting graphite with an equivalent volume fraction of nickel-coated graphite significantly enhanced the hardness and compressive strength of the Cu-NCG composites by 10.4 % and 61.6 %, respectively. Additionally, the Cu-NCG-WS 2 composite exhibits the lowest coefficient of friction (0.13), corresponding to the lowest wear rate (5.75×10 −5 mm 3/Nm). This superior lubrication performance can be attributed to the fine debris present on the composite surface, which effectively fills in the cracks and pits, replenishes the broken lubrication film, and thereby restores a smooth surface, achieving effective lubrication.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. A review on mechanical and tribological properties of graphite reinforced self lubricating hybrid metal matrix composites10.1515/rams-2018-0036 ↗
2. Solid lubrication with MoS2: a review10.3390/lubricants7070057 ↗
3. Tribological behaviour of sintered iron based self-lubricating composites10.1007/s40544-017-0186-2 ↗
4. Graphite–WS2 copper-based self-lubricating composites prepared by spark plasma sintering10.1007/s11661-023-07212-8 ↗
5. Advancements in additive manufacturing for copper-based alloys and composites: a comprehensive review
6. Tribological performance of microwave sintered copper–TiC–graphite hybrid composites10.1016/j.triboint.2010.11.008 ↗
7. Tribological properties of Cu-based self-lubricating materials composed with Cu- or Ni-plated graphite10.3390/lubricants11070271 ↗
8. Study on the synergistic effect of carbon fiber and graphite and nanoparticle on the friction and wear behavior of polyimide composites10.1016/j.matdes.2010.03.017 ↗
9. Magnetic and electrical properties of (FeIn2S4)1−x(CuIn5S8)x solid solutions10.1016/j.jmmm.2014.10.120 ↗
10. Growth, optical, magnetic and electrical properties of CuFe2.33In9.67S17.33 single crystal10.1088/2053-1591/2/8/085901 ↗
11. Growing crystals and studying structure and electronic properties of Cu2ZnGe(SхSe1-x)4 compositions10.1016/j.heliyon.2023.e22533 ↗
12. Effect of copper-plated carbon fiber on the friction and wear properties of Cu/C composites
13. The synergy between powder metallurgy processes and welding of metallic alloy: a review10.1080/00325899.2020.1807712 ↗
14. Effect of graphite coated with nickel on mechanical properties of copper-matrix/graphite composite materials
15. Influences of B4C and carbon nanotubes on friction and wear performance of Cu base self-lubricating composite10.1016/j.triboint.2023.108726 ↗
16. Wear reduction mechanism of graphite and MoS2 in epoxy composites10.1016/j.wear.2003.12.012 ↗
17. Tribological behavior of copper-molybdenum disulfide composites10.1016/j.wear.2017.05.006 ↗
18. Tribological behavior and lubrication mechanism of self-lubricating ceramic/metal composites: the effect of matrix type on the friction and wear properties10.1016/j.wear.2016.12.005 ↗
19. In-situ tribochemical formation of self-lubricating diamond-like carbon films10.1016/j.carbon.2018.06.006 ↗
20. Self-lubricating composites containing MoS2: a review10.1016/j.triboint.2017.12.033 ↗
21. Identifying the effects of cobalt addition in copper-graphene nanoplatelet composites towards improved tribological performance10.1016/j.jallcom.2020.155444 ↗
22. Effects of groove factor and surface roughness of raceway in ball-bearing-like specimens on tribological behavior and the onsets of two instabilities of dry contacts10.1016/j.wear.2018.03.006 ↗
23. Effect of braking speed on friction and wear behaviors of C/C-SiC composites10.1111/j.1744-7402.2007.02155.x ↗
24. Effect of braking pressure and braking speed on the tribological properties of C/SiC aircraft brake materials10.1016/j.compscitech.2010.02.012 ↗
25. Dry sliding tribological behavior of C/SiC under different load and speed10.1016/j.ceramint.2020.11.231 ↗