Ti3C2Tx/Ni0.2Mn0.4Zn0.4Fe2O4 ferrite nanocomposites: Dual-loss mechanism with engineered composition for microwave absorption
Source abstract
Abstract
Ni 0.2Mn 0.4Zn 0.4Fe 2O 4 (NMZF) nanoparticles were anchored on the surface of MXene(Ti 3C 2T x) to form Ti 3C 2T x/NMZF nanocomposites for optimization of microwave absorption performance. The Ti 3C 2T x/NMZF nanocomposites were synthesized by using a four-step strategy, including sonication, stirring, hydrothermal reduction and vacuum drying. More than 40 percent of the NMZF nanoparticles in this nanocomposite were assembled to form a conductive network. Meanwhile, the multilayer MXene acted as a framework to host the NMZF nanoparticles, providing dipolar polarization, interfacial polarization and eddy current loss. Benefiting from the structure design of MXene, combined with magnetic materials and optimized impedance matching, the Ti 3C 2T x/NMZF exhibited a minimum reflection loss (RL min) of −57.39 dB, with a thickness of 2.97 mm and an effective absorption bandwidth (EAB) of 3.2 GHz. Therefore, such a facile method could be used to construct nanocomposites with microwave absorption performance (-57.39 dB, 3.2 GHz), so as to address microwave pollution issues.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Magnetic Properties and Synthesis of Ferrites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Joint optimization of resource utilization and load balance with privacy preservation for edge services in 5G networks10.1007/s11036-019-01448-8 ↗
2. Deep learning for physical-Layer 5G wireless techniques: opportunities, challenges and solutions10.1109/MWC.2019.1900027 ↗
3. When deep reinforcement learning meets 5G-Enabled vehicular networks: a distributed offloading framework for traffic big data10.1109/TII.2019.2937079 ↗
4. A 3D multifunctional nitrogen-doped RGO-based aerogel with silver nanowires assisted self-supporting networks for enhanced electromagnetic wave absorption10.1016/j.cej.2022.138825 ↗
5. Low weight, low thermal conductivity, and highly efficient electromagnetic wave absorption of Three-Dimensional Graphene/SiC-nanosheets aerogel10.1016/j.compositesa.2022.106980 ↗
6. Synthesis of NiCo-LDH/MXene hybrids with abundant heterojunction surfaces as a lightweight electromagnetic wave absorber10.1016/j.cej.2021.130019 ↗
7. Multifunctional magnetic Ti3C2Tx MXene/Graphene aerogel with superior electromagnetic wave absorption performance10.1021/acsnano.0c09982 ↗
8. Macroscopic electromagnetic cooperative network-enhanced MXene/Ni chains aerogel-based microwave absorber with ultra-low matching thickness
9. Size-morphology control, surface reaction mechanism and excellent electromagnetic wave absorption characteristics of Fe3O4 hollow spheres10.1016/j.jallcom.2020.157087 ↗
10. Versatile bimetal sulfides nanoparticles-embedded N-doped hierarchical carbonaceous aerogels (N-NixSy/CoxSy@C) for excellent supercapacitors and microwave absorption10.1016/j.carbon.2021.04.029 ↗
11. Molecular intercalation-induced two-phase evolution engineering of 1T and 2H-MS2 (M = Mo, V, W) for interface-polarization-enhanced electromagnetic absorbers
12. Electrostatically fabricated heterostructure of interfacial-polarization-enhanced Fe3O4/C/MXene for ultra-wideband electromagnetic wave absorption10.1016/j.jcis.2024.02.125 ↗
13. Hierarchical graphene@MXene composite foam modified with flower-shaped FeS for efficient and broadband electromagnetic absorption10.1016/j.jmst.2022.06.018 ↗
14. Tailoring electromagnetic responses of delaminated Mo2TiC2Tx MXene through the decoration of Ni particles of different morphologies10.1016/j.cej.2022.135855 ↗
15. Morphology-control synthesis of polyaniline decorative porous carbon with remarkable electromagnetic wave absorption capabilities10.1016/j.compositesb.2020.108491 ↗
16. Magnetic CoNi alloy particles embedded N-doped carbon fibers with polypyrrole for excellent electromagnetic wave absorption10.1016/j.jcis.2021.10.006 ↗
17. Marine polysaccharide-based electromagnetic absorbing/shielding materials: design principles, structure, and properties10.1039/D2TA03529D ↗
18. Ultrathin topological insulator absorber: unique dielectric behavior of Bi2Te3 nanosheets based on conducting surface states10.1021/acsami.9b13775 ↗
19. Synthesis of Ti3C2/Fe3O4/PANI hierarchical architecture composite as an efficient wide-band electromagnetic absorber10.1016/j.apsusc.2019.03.049 ↗
20. Dielectric loss mechanism in electromagnetic wave absorbing materials10.1002/advs.202105553 ↗
21. Heterostructure design of Ni/C/porous carbon nanosheet composite for enhancing the electromagnetic wave absorption10.1016/j.carbon.2021.04.050 ↗
22. Construction of multiple electron transfer paths in 1D core-shell hetetrostructures with MXene as interlayer enabling efficient microwave absorption10.1016/j.carbon.2021.10.080 ↗
23. Improved synergistic effect for achieving ultrathin microwave absorber of 1D Co nanochains/2D carbide MXene nanocomposite10.1016/j.carbon.2020.10.039 ↗
24. 0D/1D/2D architectural Co@C/MXene composite for boosting microwave attenuation performance in 2–18 GHz10.1016/j.carbon.2022.03.017 ↗
25. Magnetic properties of nanocrystalline Ni–Zn, Zn–Mn, and Ni–Mn ferrites synthesized by reverse micelle technique10.1016/j.physb.2003.12.017 ↗
26. Rational construction of Ti3C2Tx/Co-MOF-Derived laminated Co/TiO2-C hybrids for enhanced electromagnetic wave absorption10.1021/acs.langmuir.8b03238 ↗
27. Facile preparation of in situ coated Ti3C2Tx/Ni0.5Zn0.5Fe2O4 composites and their electromagnetic performance10.1039/C7RA03402D ↗
28. Novel two-dimensional Ti3C2Tx/Ni-spheres hybrids with enhanced microwave absorption properties10.1016/j.ceramint.2019.07.331 ↗
29. Controllable synthesis and enhanced microwave absorption properties of silane-modified Ni0.4Zn0.4Co0.2Fe2O4 nanocomposites covered with reduced graphene oxide10.1039/C5RA18668D ↗
30. Co2+/Co3+ratio dependence of electromagnetic wave absorption in hierarchical NiCo2O4–CoNiO2 hybrids10.1039/C5TC01716E ↗
31. Sn4+ Ion decorated highly conductive Ti3C2 MXene: promising lithium-Ion anodes with enhanced volumetric capacity and cyclic performance10.1021/acsnano.5b07333 ↗
32. Facile synthesis of nitrogen-doped reduced graphene oxide/nickel ferrite hybrid nanocomposites with superior electromagnetic wave absorption performance in the X-band10.1016/j.jcis.2020.10.034 ↗
33. Facile preparation of Ti3C2Tx MXene@Zn–Mn ferrite composites with enhanced microwave absorption performance10.1021/acsaelm.2c01168 ↗
34. Ti3C2Tx MXene playing as a strong methylene blue adsorbent in wastewater10.1016/j.apsusc.2020.148006 ↗
35. Delamination strategy to achieve Ti3C2Tx/CNZF composites with tunable electromagnetic absorption10.1016/j.mssp.2020.105008 ↗
36. Small magnetic Co-doped NiZn ferrite/graphene nanocomposites and their dual-region microwave absorption performance10.1039/C6TC03518C ↗
37. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
38. Fe3O4@Ti3C2 MXene hybrids with ultrahigh volumetric capacity as an anode material for lithium-ion batteries10.1039/C8TA00122G ↗
39. Layered orthorhombic Nb2O5@Nb4C3Tx and TiO2@Ti3C2Tx hierarchical composites for high performance Li-ion batteries10.1002/adfm.201600682 ↗
40. A hydrothermal etching route to synthesis of 2D MXene (Ti3C2, Nb2C): enhanced exfoliation and improved adsorption performance10.1016/j.ceramint.2018.07.124 ↗
41. Heterostructure design of hydrangea-like Co2P/Ni2P@C multilayered hollow microspheres for high-efficiency microwave absorption10.1016/j.jmst.2023.09.023 ↗
42. Metal organic frameworks derived NixSey@NC hollow microspheres with modifiable composition and broadband microwave attenuation10.1016/j.carbon.2024.119215 ↗
43. Perspectives of nitrogen-doped carbons for electromagnetic wave absorption10.1016/j.carbon.2024.118925 ↗
44. Multifunctional SiC aerogel reinforced with nanofibers and nanowires for high-efficiency electromagnetic wave absorption10.1016/j.cej.2023.143518 ↗
45. Designed 3D heterostructure with 0D/1D/2D hierarchy for low-frequency microwave absorption in the S-band10.1039/D1TC04881C ↗
46. Acicular or octahedral Fe3O4/rice husk-based activated carbon composites through graphitization synthesis as superior electromagnetic wave absorbers10.1016/j.compositesa.2021.106635 ↗
47. Facile preparation and enhanced microwave absorption properties of core-shell composite spheres composited of Ni cores and TiO2 shells10.1039/C4CP05632A ↗
48. Microwave absorption properties of 3D cross-linked Fe/C porous nanofibers prepared by electrospinning10.1016/j.carbon.2018.03.081 ↗
49. Morphology-dependent magnetic role of ZIFs in nitrogen-doped MXene as metallic conductor microwave absorber10.1016/j.cej.2023.145817 ↗
50. Two-dimensional MXenes: from morphological to optical, electric, and magnetic properties and applications10.1016/j.physrep.2019.12.006 ↗
51. Synthesis of flower-like CuS hollow microspheres based on nanoflakes self-assembly and their microwave absorption properties10.1039/C5TA00086F ↗
52. Multistage coupling of interface and core–shell engineering of a cobalt-based heterostructure for integration of multiple electromagnetic absorption10.1039/D3TA03778A ↗
53. Ultralight and hyperelastic SiC nanofiber aerogel spring for personal thermal energy regulation10.1007/s40145-022-0606-2 ↗
54. Multifunctional SiC@SiO2 nanofiber aerogel with ultrabroadband electromagnetic wave absorption10.1007/s40820-022-00905-6 ↗
55. Magnetic vortex core-shell Fe3O4@C nanorings with enhanced microwave absorption performance10.1016/j.carbon.2019.10.030 ↗
56. MOFs derived magnetic porous carbon microspheres constructed by core-shell Ni@C with high-performance microwave absorption10.1016/j.jmst.2021.02.011 ↗
57. Electrostatic self-assembled NiFe2O4/Ti3C2Tx MXene nanocomposites for efficient electromagnetic wave absorption at ultralow loading level10.1007/s42114-021-00279-0 ↗
58. A freestanding 3D heterophase tungsten disulfide-based aerogel as an ultrathin microwave absorber in the Ku-band10.1039/D2TA02520E ↗
59. Effects of ordered mesoporous structure and La-doping on the microwave absorbing properties of CoFe2O410.1016/j.apsusc.2017.10.175 ↗
60. Interfacial electronic heterostructure engineering of cobalt boride nanosheets toward broadband efficient electromagnetic absorption10.1016/j.cej.2022.140506 ↗
61. Magnetically aligned Co-C/MWCNTs composite derived from MWCNT-Interconnected zeolitic lmidazolate frameworks for a lightweight and highly efficient electromagnetic wave absorber10.1021/acsami.7b10067 ↗
62. Novel solvothermal preparation and enhanced microwave absorption properties of Ti3C2Tx MXene modified by in situ coated Fe3O4 nanoparticles10.1016/j.apsusc.2019.03.264 ↗
63. Self-assembled Co nanosheet/Ti3C2Tx composites with tunable electromagnetic wave absorption10.1021/acsanm.2c04977 ↗
64. MXene/Co3O4 composite material: stable synthesis and its enhanced broadband microwave absorption10.1016/j.apsusc.2019.05.058 ↗
65. Self-assembly core–shell graphene-bridged hollow MXenes spheres 3D foam with ultrahigh specific EM absorption performance10.1002/adfm.201803938 ↗