Strengthening behavior and microstructure of 2195 Al-Cu-Li alloy under cycling loading

Cyclic strengthening process, as a newly developed aluminum alloy strengthening technique, has garnered significant attention due to its advantages of rapidity, efficiency, and superior mechanical properties. This study investigated the effects of strain amplitude and loading frequency on cyclic strengthening, including mechanical properties and microstructural evolution. At room temperature, the cyclic strengthening effect of the 2195 alloy increases with increasing strain amplitude, while the influence of loading frequency is pronounced within the elastic range but nearly negligible within the plastic range. Microstructural analysis reveals that cyclic strengthening behavior within the elastic range is attributed to the precipitation of clusters, whereas within the plastic range, it is attributed to the precipitation of clusters and dislocation multiplication. Unlike other plastic deformations, cyclic plastic loading generates dislocations primarily in the form of dislocation loops. The dynamic precipitation of clusters and the diffuse distribution of dislocation loops significantly enhance the alloy`s strength with minimal sacrifice of elongation. Experimental investigations on the influence of loading frequency on these precipitation behaviors demonstrate a positive correlation with dislocation generation and a negative correlation with cluster precipitation. Comparison of specimens with different strain amplitudes reveals that larger strain amplitudes provide more energy for cluster precipitation, thereby promoting precipitation. However, excessively large strain amplitudes lead to the annihilation of vacancies due to the introduction of more dislocations, thus inhibiting cluster precipitation. This indicates that the precipitation of clusters during cyclic deformation is profoundly influenced by dislocation behavior. This study deepens the understanding of cyclic strengthening mechanisms and provides support for subsequent development of cyclic strengthening processes in other materials design.