Role of carbon on the enhanced strength-ductility synergy in a high-entropy alloy by multiple synergistic strategies
Source abstract
Abstract
A new Fe 47Mn 31Co 10Cr 10C 2 high-entropy alloy (HEA) was developed to investigate the role of carbon in enhancing the strength-ductility synergy by utilizing multiple synergistic strengthening strategies with mitigating the adverse effect of carbon. Compared with the Fe 40Mn 40Co 10Cr 10 twinning-induced plasticity (TWIP) HEA, the carbon-doped Fe 47Mn 31Co 10Cr 10C 2 HEA after annealing at 1173 K for 10 min exhibited a higher strain-hardening rate, and significantly improved yield strength (YS) and ultimate tensile strength (UTS), with maintaining high elongation. The remarkable improvements in YS were mainly attributed to the multiple synergistic strengthening mechanisms, including enhanced grain boundary strengthening, hetero-deformation-induced (HDI) strengthening, and Cr 23C 6 precipitation strengthening. The higher strain-hardening rate could be ascribed to the enhanced TWIP effect and HDI strain-hardening. The effective stacking fault energy (SFE) of the Fe 40Mn 40Co 10Cr 10 and Fe 47Mn 31Co 10Cr 10C 2 HEAs were calculated by thermodynamics to be 23.4 mJ/m 2 and 22.1 mJ/m 2, respectively. This revealed that reducing the Mn content effectively counteracted the increasing effect of carbon on the SFE for the carbon-doped HEA. The promotion of deformation twinning in the Fe 47Mn 31Co 10Cr 10C 2 HEA could be ascribed to the comprehensive effect of the SFE and the stress levels of the alloys. On one hand, compared with the Fe 40Mn 40Co 10Cr 10 TWIP HEA, the lower SFE in the Fe 47Mn 31Co 10Cr 10C 2 HEA led to a drop in the critical stress for deformation twinning. On the other hand, due to the strong multiple synergistic strengthening with carbon doping, the stress levels of the alloys were significantly enhanced, thus making the activation stress of twinning much easier to achieve. This study contributes to the alloy design guidance of properly utilizing carbon to achieve high strength-ductility synergy in alloys by multiple synergistic strategies.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
2. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
3. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
4. Manipulating the ordered oxygen complexes to achieve high strength and ductility in medium-entropy alloys10.1038/s41467-023-36319-0 ↗
5. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
6. Facile route to bulk ultrafine-grain steels for high strength and ductility10.1038/s41586-021-03246-3 ↗
7. High-density nanoprecipitates and phase reversion via maraging enable ultrastrong yet strain-hardenable medium-entropy alloy10.1016/j.actamat.2023.118810 ↗
8. Combined strengthening from nanoprecipitates, stacking faults and nano-twins enables a strong and ductile medium-entropy alloy10.1016/j.msea.2023.145828 ↗
9. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
10. Superior strain-hardening by deformation-induced nano-HCP martensite in Fe–Mn–Si–C high-manganese steel10.1016/j.msea.2021.141864 ↗
11. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
12. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
13. High-entropy alloys with heterogeneous microstructure: processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
14. Effect of C addition on microstructure and mechanical properties of as-cast HEAs (Fe50Mn30Co10Cr10)100-xCx10.1016/j.matchemphys.2020.123501 ↗
15. Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys10.1016/j.jallcom.2018.01.348 ↗
16. Heterogeneous structure design to strengthen carbon-containing CoCrFeNi high entropy alloy10.1007/s40195-021-01268-4 ↗
17. Precipitation-driven metastability engineering of carbon-doped CoCrFeNiMo medium-entropy alloys at cryogenic temperature10.1016/j.scriptamat.2020.07.023 ↗
18. Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior10.1016/j.actamat.2018.10.050 ↗
19. Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys10.1038/srep40704 ↗
20. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
21. Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility10.1016/j.msea.2018.01.045 ↗
22. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.08.072 ↗
23. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys10.1016/j.msea.2004.01.059 ↗
24. Twinning in metastable high-entropy alloys10.1038/s41467-018-04780-x ↗
25. In situ neutron diffraction study of phase transformation of high mn steel with different carbon content10.3390/cryst10020101 ↗
26. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
27. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
28. Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments10.1080/14686996.2022.2080512 ↗
29. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
30. Thermodynamic calculation of stacking fault energy of the Fe–Mn–Si–C high manganese steels10.1016/j.msea.2014.01.046 ↗
31. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
32. Comparison of EBSD and conventional methods of grain size measurement of hardmetals10.1016/j.ijrmhm.2008.06.009 ↗
33. A general mechanism of martensitic nucleation: part I. General concepts and the FCC→HCP transformation
34. Computational thermodynamic and first-principles calculation of stacking fault energy on ternary Co-based alloys10.1016/j.commatsci.2017.11.004 ↗
35. Effect of Si content on the stacking fault energy in γ-Fe–Mn–Si–C alloys: part II. Thermodynamic estimation10.1016/j.msea.2009.02.032 ↗
36. Direct estimation of stacking fault energy by thermodynamic analysis10.1002/pssa.2210360233 ↗
37. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
38. The characteristic and thermodynamics/kinetics of martensitic transformation in Fe50Mn30Co10Cr10 high-entropy alloy during deformation/heat treatment10.1002/adem.201900868 ↗
39. Néel temperature of high Mn austenitic steels10.1007/s12540-012-3006-2 ↗
40. Guillermet, Composition dependence of the Néel temperature and the entropy of the magnetic transition in the fcc phase of Fe-Mn and Fe-Mn-Co alloys10.1016/j.jallcom.2016.07.213 ↗
41. Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels10.1016/j.actamat.2017.11.023 ↗
42. Driving force for γ→ε martensitic transformation and stacking fault energy of γ in Fe-Mn binary system10.1007/s11661-000-0271-3 ↗
43. Effects of Si on the microstructure and work hardening behavior of Fe−17Mn−1.1C−xSi high manganese steels10.1007/s12540-020-00846-y ↗
44. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
45. Effect of f.c.c. antiferromagnetism on martensitic transformation in Fe–Mn–Si based alloys10.1016/S0921-5093(98)01105-8 ↗
46. A thermodynamic evaluation of the Cr-Mn and Fe-Cr-Mn systems10.1007/BF02666327 ↗
47. Mechanical properties and deformation behavior of dual-phase Al0.6CoCrFeNi high-entropy alloys with heterogeneous structure at room and cryogenic temperatures10.1016/j.jallcom.2019.152663 ↗
48. Thermodynamic assessments of the Cu–Mn–X (X: Fe, Co) systems10.1016/j.jallcom.2006.08.018 ↗
49. TCFE2000: The Thermo-Calc Steels Database, upgraded by B.-J. Lee, B. Sundman at KTH, KTH, Stockholm, 1999.
50. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
51. A thermodynamic modelling of the stability of sigma phase in the Cr-Fe-Ni-V high-entropy alloy system10.1007/s11669-018-0672-x ↗
52. A thermodynamic description of the Co-Cr-Fe-Ni-V system for high-entropy alloy design10.1016/j.calphad.2019.05.001 ↗
53. Preparation of samples using a chemical etching for SEM/EBSP method in a pure magnesium polycrystal and analysis of its twin boundaries10.2464/jilm.55.131 ↗
54. Formation and deformation mechanisms in gradient nanostructured NiCoCrFe high entropy alloys upon supersonic impacts10.1063/5.0069402 ↗
55. Chowdhury, Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy10.1016/j.scriptamat.2021.113891 ↗
56. Synergistic strengthening of heterogeneous structures and dual-morphology nano-precipitates in Co1.5CrNi1.5Al0.2Ti0.1V0.1 medium-entropy alloy10.1016/j.msea.2021.142492 ↗
57. Double heterogeneous structures induced excellent strength–ductility synergy in Ni40Co30Cr20Al5Ti5 medium-entropy alloy10.1016/j.jmst.2023.10.011 ↗
58. Superb strength and ductility balance of a Co-free medium-entropy alloy with dual heterogeneous structures10.1016/j.jmst.2021.05.023 ↗
59. Deformable κ phase induced deformation twins in a CoNiV medium entropy alloy10.1016/j.ijplas.2022.103509 ↗
60. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
61. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
62. Development of a large size FCC high-entropy alloy with excellent mechanical properties10.1016/j.msea.2019.138039 ↗
63. Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress10.1016/j.pmatsci.2023.101131 ↗
64. Temperature-dependent universal dislocation structures and transition of plasticity enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy10.1016/j.ijplas.2021.103148 ↗
65. Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures10.1016/j.msea.2019.05.057 ↗
66. Precipitation hardening in metals10.1179/026708399773002782 ↗
67. Achieving superior cryogenic tensile properties in a Ti-doped (Fe40Mn40Co10Cr10)96.7C3.3 high-entropy alloy by recovering deformation twinning10.1016/j.msea.2021.140927 ↗
68. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
69. Abnormal strain-hardening in Co-rich CoNiV medium-entropy alloys10.1016/j.scriptamat.2023.115894 ↗
70. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
71. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
72. Design of a FeMnAlC steel with TWIP effect and evaluation of its tensile and fatigue properties10.1016/j.jallcom.2020.154806 ↗
73. Design for Fe-high Mn alloy with an improved combination of strength and ductility10.1038/s41598-017-03862-y ↗
74. High stress twinning in a compositionally complex steel of very high stacking fault energy10.1038/s41467-022-31315-2 ↗
75. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗