Stabilization and high thermoelectric performance of high-entropy-type cubic AgBi(S, Se, Te)2
Source abstract
Abstract
As thermoelectric generators can convert waste heat into electricity, they play an important role in energy harvesting. The metal chalcogenide AgBiSe2 is one of the high-performance thermoelectric materials with low lattice thermal conductivity (klat), but it exhibits temperature-dependent crystal structural transitions from hexagonal to rhombohedral, and finally a cubic phase as the temperature rises. The high figure-of-merit ZT is obtained only for the high-temperature cubic phase. In this study, we utilized the high-entropy-alloy (HEA) concept for AgBiSe2 to stabilize the cubic phase throughout the entire temperature range with enhanced thermoelectric performance. We synthesized high-entropy-type AgBiSe2-2xSxTex bulk polycrystals and realized the stabilization of the cubic phase from room temperature to 800 K for x > 0.6. The ultra-low klat at of 0.30 Wm^-1K^-1 and the high peak ZT 0.9 at around 750 K were realized for cubic AgBiSe2-2xSxTex without carrier tuning. In addition, the average ZT value of x = 0.6 and 0.7 for the temperature range of 360-750 K increased to 0.38 and 0.40, respectively, which are comparable to the highest previously reported values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Complex thermoelectric materials10.1038/nmat2090 ↗
2. Compromise and synergy in high-efficiency thermoelectric materials10.1002/adma.201605884 ↗
3. High performance thermoelectric materials: progress and their applications
4. Benefits of carrier-pocket anisotropy to thermoelectric performance: the case of p-type AgBiSe210.1103/PhysRevApplied.3.064003 ↗
5. High thermoelectric and reversible p-n-p conduction type switching integrated in dimetal chalcogenide10.1021/ja308936b ↗
6. High thermoelectric properties of n-type AgBiSe210.1021/ja312474n ↗
7. Promising thermoelectric performance in n-type AgBiSe2: effect of aliovalent anion doping10.1039/C4TA04912H ↗
8. Vacancy and anti-site disorder scattering in AgBiSe2 thermoelectrics10.1039/C7DT00381A ↗
9. Effect of Te substitution on crystal structure and transport properties of AgBiSe2 thermoelectric material10.1039/C7DT04821A ↗
10. Local structure and influence of Sb substitution on the structure–transport properties in AgBiSe210.1021/acs.inorgchem.9b00874 ↗
11. Defect engineering for realizing p-Type AgBiSe2 with a promising thermoelectric performance10.1021/acs.chemmater.0c00481 ↗
12. Stabilized cubic phase BiAgSe2−xSx with excellent thermoelectric properties via phase boundary engineering10.1039/D1TC00760B ↗
13. Influence of the temperature and composition on the crystal structure of the AgBiSe2-AgBiS2 system10.1002/crat.201700075 ↗
14. Doping-induced polymorph and carrier polarity changes in thermoelectric Ag(Bi,Sb)Se2 solid solution10.1021/acs.inorgchem.9b01038 ↗
15. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
16. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
17. n-Type thermoelectric metal chalcogenide (Ag,Pb,Bi)(S,Se,Te) designed by multi-site-type high-entropy alloying10.1080/21663831.2021.1929533 ↗
18. Superconductivity in REO0.5F0.5BiS2 with high-entropy-alloy-type blocking layers10.7567/APEX.11.053102 ↗
19. Improvement of superconducting properties by high mixing entropy at blocking layers in BiS2-based superconductor REO0.5F0.5BiS210.1016/j.ssc.2019.04.001 ↗
20. Superconductivity in high-entropy-alloy telluride AgInSnPbBiTe510.7566/JPSJ.88.124708 ↗
21. Superconducting properties of high-entropy-alloy tellurides M-Te (M: Ag, In, Cd, Sn, Sb, Pb, Bi) with a NaCl-type structure10.35848/1882-0786/ab7482 ↗
22. Synthesis of RE123 high-Tc superconductors with a high-entropy-alloy-type RE site
23. An efficient way of increasing the total entropy of mixing in high-entropy-alloy compounds: a case of NaCl-type (Ag,In,Pb,Bi)Te1−xSex (x = 0.0, 0.25, 0.5) superconductors10.1039/D0DT01880E ↗
24. Superconductivity in CuAl2-type Co0.2Ni0.1Cu0.1Rh0.3Ir0.3Zr2 with a high-entropy-alloy transition metal site10.1080/21663831.2020.1860147 ↗
25. Synthesis of high-entropy-alloy-type superconductors (Fe,Co,Ni,Rh,Ir)Zr2 with tunable transition temperature10.1007/s10853-021-05921-2 ↗
26. High-entropy-stabilized chalcogenides with high thermoelectric performance10.1126/science.abe1292 ↗
27. High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics10.1126/science.abq5815 ↗
28. Cubic phase stabilization and thermoelectric performance optimization in AgBiSe2–SnTe system
29. High-throughput powder diffraction measurement system consisting of multiple MYTHEN detectors at beamline BL02B2 of SPring-810.1063/1.4999454 ↗
30. Three-dimensional visualization in powder diffraction10.4028/www.scientific.net/SSP.130.15 ↗
31. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
32. May · 2012 · 1
33. High thermoelectric performance in the new cubic semiconductor AgSnSbSe3 by high-entropy engineering10.1021/jacs.0c07803 ↗
34. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
35. Order–disorder transition in AgCrSe2: a new route to efficient thermoelectrics10.1021/cm200581k ↗
36. Superionic phase transition in silver chalcogenide nanocrystals realizing optimized thermoelectric performance10.1021/ja2104476 ↗
37. Cation disorder and bond anharmonicity optimize the thermoelectric properties in kinetically stabilized rocksalt AgBiS2 nanocrystals10.1021/cm401630d ↗
38. Lattice thermal conductivity of disordered semiconductor alloys at high temperatures10.1103/PhysRev.131.1906 ↗
39. Strain field fluctuation effects on lattice thermal conductivity of ZrNiSn-based thermoelectric compounds10.1063/1.1783022 ↗
40. The scattering of low-frequency lattice waves by static imperfections10.1088/0370-1298/68/12/303 ↗
41. Model for lattice thermal conductivity at low temperatures10.1103/PhysRev.113.1046 ↗
42. Effect of point imperfections on lattice thermal conductivity10.1103/PhysRev.120.1149 ↗
43. A simplified method for calculating the debye temperature from elastic constants10.1016/0022-3697(63)90067-2 ↗
44. Relation between the parameters of the elasticity theory and averaged bulk modulus of solids10.1134/S106378421111020X ↗
45. Ca3AlSb3: an inexpensive, non-toxic thermoelectric material for waste heat recovery10.1039/C0EE00517G ↗
46. Thermoelectric alloys between PbSe and PbS with effective thermal conductivity reduction and high figure of merit10.1039/c3ta14929c ↗
47. Local chemical ordering coordinated thermal stability of nanograined high-entropy alloys10.1007/s12598-022-02194-9 ↗
48. Unraveling the origin of local chemical ordering in Fe-based solid-solutions10.1016/j.actamat.2023.119583 ↗
49. Tailoring local chemical ordering via elemental tuning in high-entropy alloys10.1021/jacs.3c12048 ↗
50. High thermoelectric performance of tellurium-free n-type AgBi1-xSbxSe2 with stable cubic structure enabled by entropy engineering10.1016/j.actamat.2021.117291 ↗
51. Stabilizing n-type cubic AgBiSe2 thermoelectric materials through alloying with PbS10.3390/ma10010070 ↗
52. Entropy engineered cubic n-Type AgBiSe2 alloy with high thermoelectric performance in fully extended operating temperature range10.1002/aenm.202003304 ↗