Effect of Ti3AlC2 addition on the densification and high- temperature erosion resistance of TiB2 composite ceramics fabricated by SPS
Source abstract
Abstract
TiB 2-Ti 3AlC 2 composite ceramics were fabricated by spark plasma sintering (SPS) technique. The effects of Ti 3AlC 2 additive on the densification, mechanical properties and resistance to high-temperature aluminum liquid erosion of composite ceramics were investigated, and the mechanisms of densification and erosion resistance were highlighted, respectively. At sintering temperature of 1800 °C, pressure of 40 MPa, and holding time of 10 min, TiB 2 composite ceramic with 40 wt% Ti 3AlC 2 acquired 98.9 % densification, 98.2 % thermal shock resistance, and 13.71 MPa∙m 1/2 fracture toughness. The in-situ decomposition of Ti 3AlC 2 was clearly observed during the sintering process, and the generated liquid Al induced the liquid phase sintering mechanism, promoting the densification of composite ceramics. Besides, the simultaneous in-situ generation of TiC phase strengthened the TiB 2 matrix and induced a mixed toughening mechanism of transgranular fracture and intergranular fracture, resulting in superior mechanical properties and better resistance to high-temperature erosion of TiB 2-Ti 3AlC 2 composite ceramics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Material properties of titanium diboride10.6028/jres.105.057 ↗
2. Fabrication and mechanical properties of titanium boride ceramics10.1111/j.1151-2916.1999.tb01975.x ↗
3. Low-temperature synthesis of high-purity TiB2 via carbothermal reduction of metatitanic acid and H3BO310.1016/j.ceramint.2023.09.346 ↗
4. Mechanical properties of hot-pressed high-entropy diboride-based ceramics10.1007/s40145-020-0383-8 ↗
5. Graphene nanosheets toughened TiB2-based ceramic tool material by spark plasma sintering10.1016/j.ceramint.2018.02.098 ↗
6. Preparation and anisotropic properties of textured structural ceramics: a review10.1007/s40145-019-0325-5 ↗
7. Preparation and toughening mechanism of Al2O3 composite ceramics toughened by B4C@TiB2 core-shell units10.26599/JAC.2023.9220826 ↗
8. Wettable TiB2 cathode for aluminum electrolysis: a review10.1007/s40831-022-00526-8 ↗
9. Chemical and electrochemical behavior of titanium diboride in cryolite-alumina melt and in molten aluminum10.1006/jssc.2000.8819 ↗
10. The role of TiB2 particles in the creep and penetrating resistance of graphite-based composite10.1016/j.ceramint.2021.01.054 ↗
11. A review of multiphysical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
12. On the simulation of spark plasma sintered TiB2 ultra high temperature ceramics: a numerical approach10.1016/j.ceramint.2020.03.003 ↗
13. Densification behavior and mechanical properties of the spark plasma sintered monolithic TiB2 ceramics10.1016/j.msea.2010.05.086 ↗
14. Rapid synthesis of Ti3AlC2/TiB2 composites by the spark plasma sintering (SPS) technique10.1016/j.ceramint.2009.05.009 ↗
15. Stability and selective oxidation of aluminumin nano-laminate Ti3AlC2 upon heating in argon10.1021/cm030022v ↗
16. Microstructure and mechanical properties of TiB2-40 wt% TiC composites: effects of adding a low-temperature hold prior to sintering at high temperatures10.1016/j.ceramint.2018.09.048 ↗
17. Integrated high strength and high toughness induced by elongated TiB2 grains in reactive sintered TiB2-TiC-SiC ceramics10.1111/jace.18737 ↗
18. High-performance B4C-TiB2-SiC composites with tuneable properties fabricated by reactive hot pressing10.1016/j.jeurceramsoc.2019.04.001 ↗
19. Technical performance of co-addition of SiC particulates and SiC whiskers in hot-pressed TiB2-based ultrahigh temperature ceramics10.1016/j.ceramint.2020.04.289 ↗
20. Microstructure and mechanical properties of TiB2-B4C ceramics fabricated by hot-pressing10.1016/j.ceramint.2021.05.320 ↗
21. B4C-TiB2 composite with modified microstructure and enhanced properties from optimal size coupling of raw powders10.1111/jace.19127 ↗
22. Influence of TiN dopant on microstructure of TiB2 ceramic sintered by spark plasma10.1016/j.ceramint.2018.11.228 ↗
23. Two-step sintering of TiB2-40 wt% TiN composites10.1016/j.ijrmhm.2019.105037 ↗
24. Spark plasma sintering of TiB2-based ceramics with Ti3AlC210.1016/j.ceramint.2021.01.033 ↗
25. Research progress in TiB2 wettable cathode for aluminum reduction
26. Degradation of TiB2 ceramics in liquid aluminum10.1016/j.jeurceramsoc.2008.05.011 ↗
27. Taguchi analysis on the effect of hot pressing parameters on density and hardness of zirconium diboride10.1016/j.ijrmhm.2014.09.006 ↗
28. Microstructures and mechanical properties of TiB2 composite ceramics with co-addition of Ti and TiC fabricated by SPS10.1016/j.ceramint.2022.10.230 ↗
29. Parameters for measuring the thermal shock of ceramic materials with an indentation-quench method10.1016/S0955-2219(01)00504-0 ↗
30. Thermal shock resistance and fracture toughness of liquid-phase-sintered SiC-based ceramics10.1016/j.jeurceramsoc.2009.01.021 ↗
31. Microstructure and mechanical properties of B4C-TiB2-SiC composites toughened by composite structural toughening phases10.1111/jace.14815 ↗
32. TiC-TiB2 composites: a review of phase relationships, processing and properties10.1016/j.jeurceramsoc.2007.11.011 ↗
33. Fully dense B4C ceramics fabricated by spark plasma sintering at relatively low temperature10.1088/2053-1591/aad9d9 ↗
34. Microstructure and mechanical properties of TiB-TiB2 ceramic matrix composites fabricated by spark plasma sintering10.1016/j.msea.2011.01.096 ↗
35. Microstructure and mechanical properties of B4C-TiB2 ceramic composites prepared via a two-step method10.1016/j.jeurceramsoc.2021.07.013 ↗
36. Synergistic effects of TiB2 and graphene nanoplatelets on the mechanical and electrical properties of B4C ceramic10.1016/j.jeurceramsoc.2021.10.044 ↗
37. Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy10.1016/j.corsci.2020.108479 ↗
38. G. Pettersen, Development of microstructure during sintering and aluminium exposure of titanium diboride ceramics. Dr. Ing. Thesis, Norwegian University of Science and Technology, Department of Physics, Trondheim, 1997.