A comparative investigation on microstructure evolution and mechanical property of WC particle reinforced CrFeNiB0.03Si0.03 medium entropy alloy by direct energy deposition
Source abstract
Abstract
WC spherical particles of x wt% (x=0,10,20,30) were added into CrFeNiB 0.03Si 0.03 medium entropy alloy (MEA) prepared by the laser direct energy deposition. The effects of WC content on the microstructure, the mechanical properties and the friction and wear properties of CrFeNiB 0.03Si 0.03/ WC composites were systematically discussed. Results indicate that most of the WC particles are not completely dissolved and evenly dispersed in the CrFeNiB 0.03Si 0.03 /WC composite matrix, while the dissolved W and C elements diffuse into the matrix and form a eutectic structure containing carbides. With the increase of WC content, the hardness of CrFeNiB 0.03Si 0.03/WC increase correspondingly. At the same time, compared with CrFeNiB 0.03Si 0.03, CrFeNiB 0.03Si 0.03/WC has better wear resistance and higher yield strength. In particular, the wear resistance of CrFeNiB 0.03Si 0.03 with 30 wt%WC is increased by 4.1 times and the yield strength is increased by more than 1.6 times. It proves that the yield strength and wear resistance of laser deposited CrFeNiB 0.03Si 0.03 MEA can be improved by adding WC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
2. Microstructural evolution and mechanical characterization of a WC-reinforced CoCrFeNi HEA matrix composite10.1038/s41598-022-13649-5 ↗
3. Microstructure and properties of ZrB2-SiC continuous gradient coating prepared by high speed laser cladding10.1016/j.triboint.2022.107645 ↗
4. Advances in ultra-high temperature ceramics, composites, and coatings10.1007/s40145-021-0550-6 ↗
5. Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB2 powders10.1016/j.apsusc.2015.04.030 ↗
6. Study on microstructure and tribological properties of nano/micron TiC/TC4 composites fabricated by laser melting deposition10.1016/j.jmapro.2022.07.068 ↗
7. Wear and heat shock resistance of Ni-WC coating on mould copper plate fabricated by laser10.1016/j.jmrt.2020.05.083 ↗
8. Microstructure, mechanical properties, and wear behavior of AlCoCrFeNi high-entropy alloy and AlCrFeNi medium-entropy alloy with WC addition10.1016/j.wear.2023.204701 ↗
9. Microstructure evolution and enhanced mechanical properties of additively manufactured CrCoNi medium-entropy alloy composites10.1016/j.jallcom.2022.167169 ↗
10. Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding10.1016/j.surfcoat.2019.125326 ↗
11. Effects of WC on the Microstructure, Wear and Corrosion Resistance of Laser-Deposited CoCrFeNi High Entropy Alloy Coatings10.3390/coatings12070985 ↗
12. Effect of different contents of WC on microstructure and properties of CrMnFeCoNi high-entropy alloy-deposited layers prepared by PTA10.1557/s43578-021-00452-7 ↗
13. Microstructures and wear-resistance of WC-reinforced high entropy alloy composite coatings by plasma cladding: effect of WC morphology10.1080/02670844.2020.1812480 ↗
14. Crack formation mechanisms and control methods of laser cladding coatings: a review10.3390/coatings13061117 ↗
15. Interfacial structures and mechanical properties of a high entropy alloy-diamond composite10.1016/j.ijrmhm.2019.105109 ↗
16. A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components10.1080/17452759.2020.1830346 ↗
17. Analytical modeling of in-situ deformation of part and substrate in laser cladding additive manufacturing of Inconel 62510.1016/j.jmapro.2019.11.013 ↗
18. Recent research and development status of laser cladding: a review10.1016/j.optlastec.2021.106915 ↗
19. Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding10.1016/j.ijrmhm.2019.105044 ↗
20. Study on microstructure and properties of WC particle-reinforced fecocrni-matrix high entropy alloy composites10.3390/ma16237380 ↗
21. Effects of WC on the microstructure, wear and corrosion resistance of laser-deposited CoCrFeNi high entropy alloy coatings10.3390/coatings12070985 ↗
22. Improving wear and corrosion resistance of LDEDed CrFeNi MEA through addition of B and Si
23. Microstructure, wear resistance and electrochemical properties of spherical/non-spherical WC reinforced Inconel 625 superalloy by laser melting deposition10.1016/j.jmapro.2021.12.045 ↗
24. Effect of WC composition on the microstructure and surface properties of laser directed energy deposited SS 316-WC composites10.1007/s11665-021-05971-2 ↗
25. Wear mechanisms and micro-evaluation on WC particles investigation of WC-Fe composite coatings fabricated by laser cladding10.1016/j.surfcoat.2021.127341 ↗
26. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding10.1016/j.apsusc.2020.146085 ↗
27. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding10.1016/j.surfcoat.2019.04.063 ↗
28. Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatings10.1016/j.matdes.2015.12.121 ↗
29. Circular oscillating laser melting deposition of nickel-based superalloy reinforced by WC: microstructure, wear resistance and electrochemical properties10.1016/j.jmapro.2021.06.074 ↗
30. Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting10.1016/j.msea.2017.11.126 ↗
31. Effect of the scanning speed on microstructural evolution and wear behaviors of laser cladding NiCrBSi composite coatings10.1016/j.optlastec.2015.03.015 ↗
32. Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr–CrB210.1016/j.apsusc.2014.01.011 ↗
33. Microstructure and mechanical properties of novel Si-added CrFeNi medium-entropy alloy prepared via vacuum arc-melting10.1016/j.jallcom.2022.164136 ↗
34. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
35. Microstructural evolution and mechanical properties of differently heat-treated binder jet printed samples from gas- and water-atomized alloy 625 powders10.1016/j.actamat.2016.11.021 ↗
36. A comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding10.1016/j.optlastec.2021.106967 ↗
37. Tribological properties of solid solution strengthened laser cladded NiCrBSi/WC-12Co metal matrix composite coatings10.3390/ma15010342 ↗
38. A comparative study of microstructure and mechanical properties of ODS CrFeNi-based medium- and high-entropy alloys10.1016/j.jallcom.2022.166518 ↗
39. Effects of WC particles on microstructure and mechanical properties of 316L steel obtained by laser melting deposition10.1016/j.ceramint.2022.03.324 ↗
40. Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: microstructural, interfacial, and mechanical properties10.1016/j.jmatprotec.2020.116618 ↗
41. Microstructure and properties of IN718/WC-12Co composite coating by laser cladding10.1016/j.ceramint.2021.12.108 ↗
42. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding10.1016/j.surfcoat.2017.11.051 ↗
43. Microstructure and properties of metal parts remanufactured by laser cladding TiC and TiB2 reinforced Fe-based coatings10.1016/j.ceramint.2022.01.299 ↗
44. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC10.1016/j.wear.2014.12.021 ↗