Chemical bath co-deposition of Co3O4 and In2O3 on TiO2 nanotubes, aiming for photoanodes with improved photoelectrochemical properties
Source abstract
Abstract
This study investigates the implications of the deposition of Co 3O 4 and In 2O 3 onto TiO 2 nanotube thin films for the photoelectrochemical activity of TiO 2 nanotubes (TNTs). Initially, TiO 2 nanotubes were fabricated through an electrochemical anodizing process. Subsequently, a facile chemical bath deposition (CBD) method was used to deposition Co 3O 4 and In 2O 3 oxides. The resulting composites are used as photoanodes for the photoelectrochemical cathodic protection of AISI304 stainless steel (304SS) in marine environments. The surface morphology, compositions, crystalline structures, and optical characteristics of samples were examined using a combination of FESEM, TEM, EDX, XPS, XRD, and UV-Vis absorption spectroscopy. Electrochemical measurements under both illuminated and dark conditions were conducted to assess the photoelectrochemical characteristics of synthesized samples. The optimal co-deposited photoanode, significantly shifted the open circuit potential of the coupled AISI 304SS to −708 mV under intermittent light exposure, demonstrating appropriate photocathodic protection (PCP) performance. This potential was further enhanced and maintained at −720 mV for an hour in continuous light tests. Additionally, the photoanodes showed some degrees of delayed cathodic protection even after the light was switched off. The Co 3O 4-In 2O 3-modified TNTs composite exhibits superior photoelectrochemical cathodic protection activity due to the synergistic effects of Co 3O 4 and In 2O 3 nanoparticles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. High-efficiency photocathodic protection performance of novel MnIn2S4/TiO2 n-n heterojunction films for Q235 carbon steel in chloride-containing simulated concrete pore solution10.1016/j.jallcom.2023.168957 ↗
2. Visible-light-driven photogenerated cathodic protection of stainless steel by liquid-phase-deposited TiO2 films10.1016/j.electacta.2012.02.052 ↗
3. TiN/TiO2/MXene ternary composite with photocathodic protection for 304 stainless steel10.1016/j.cej.2022.136390 ↗
4. 3D ZnIn2S4 nanosheets/TiO2 nanotubes as photoanodes for photocathodic protection of Q235 CS with high efficiency under visible light10.1016/j.jallcom.2018.09.027 ↗
5. Principles of corrosion engineering and corrosion control
6. Construction of Ti3C2/TiO2/TiN/polyaniline quaternary composite and its application in photocathodic protection coating for 304 stainless steel10.1016/j.electacta.2023.142806 ↗
7. A review on photoelectrochemical cathodic protection semiconductor thin films for metals10.1016/j.gee.2017.02.003 ↗
8. Designing efficient TiO2-based photoelectrocatalysis systems for chemical engineering and sensing10.1016/j.cej.2019.122605 ↗
9. Potent n-type nanostructured cruciate flower-like Cu/Cu2O films for photocathodic protection10.1016/j.matchemphys.2019.122311 ↗
10. Semiconductors, in
11. Photogenerated cathodic protection properties of Ag/NiS/TiO2 nanocomposites
12. A highly efficient ZnS/CdS@TiO2 photoelectrode for photogenerated cathodic protection of metals10.1016/j.electacta.2010.08.017 ↗
13. N-doped TiO2@TiO2 visible light active film with stable and efficient photocathodic protection performance10.1016/j.jelechem.2019.05.020 ↗
14. Preparation and photocathodic protection property of Ag2S-TiO2 composites10.1016/j.jallcom.2017.05.133 ↗
15. Carbon quantum dots/Ag sensitized TiO2 nanotube film for applications in photocathodic protection10.1016/j.jallcom.2019.05.199 ↗
16. Photoelectrochemical performance of titania nanotubes codoped by vanadium and chromium for protection of stainless steel: a promising photoanode for continuous protection in the dark10.1016/j.jallcom.2023.169429 ↗
17. Study on cerium-doped nano-TiO2 coatings for corrosion protection of 316 L stainless steel10.1186/1556-276X-7-227 ↗
18. Facile fabrication of BiVO4 modified TiO2 nanotube film photoanode and its photocathodic protection effect on stainless steel10.1016/j.corsci.2019.05.034 ↗
19. Fabrication of TiO2/CdS/Co(OH)2 composite and its application in photoelectrochemical cathodic protection of 304 stainless steel under visible light10.1016/j.matlet.2023.135467 ↗
20. Dual-function photoelectrode of TiO2 nanotube array/CdZnS/ZnS heterojunction for efficient photoelectrochemical cathodic protection and anti-biofouling10.1016/j.jmst.2023.10.064 ↗
21. Effect of Co3O4/TiO2 heterojunction photoanode with enhanced photocathodic protection on 304 stainless steel under visible light10.1016/j.colsurfa.2023.131150 ↗
22. Enhanced photoelectrochemical protection of 304 stainless steel induced by the internal electric field effect of a g-C3N4/graphene/TiO2 Z-scheme system10.1016/j.materresbull.2023.112283 ↗
23. Effect of work-function and morphology of heterostructure components on CO2 reduction photo-catalytic activity of MoS2-Cu2O heterostructure10.1016/j.cej.2021.132709 ↗
24. The enhanced photocatalytic activity of CdS/TiO2 nanocomposites by controlling CdS dispersion on TiO2 nanotubes10.1016/j.apsusc.2011.02.007 ↗
25. High-performance electro-optical dual-control color-changing device based on WO3/Cu and TiO2/NiO/CdS composite electrodes10.1016/j.electacta.2023.142792 ↗
26. A promoted photocatalysis system trade-off between thermodynamic and kinetic via hierarchical distribution dual-defects for efficient H2 evolution10.1016/j.cej.2021.133281 ↗
27. Construction of multi-homojunction TiO2 nanotubes for boosting photocatalytic hydrogen evolution by steering photogenerated charge transfer10.1007/s12274-022-5050-7 ↗
28. Selective CO2 photoreduction to C2 hydrocarbon via synergy between metastable ordered oxygen vacancies and hydrogen spillover over TiO2 nanobelts10.1016/j.apcatb.2023.123372 ↗
29. Enhancement of the visible-light photocatalytic activity of In2O3-TiO2 nanofiber heteroarchitectures10.1021/am201499r ↗
30. Fabrication of hollow type-II and Z-scheme In2O3/TiO2/Cu2O photocatalyst based on In-MIL-68 for efficient catalytic degradation of tetracycline10.1016/j.seppur.2021.118487 ↗
31. Enhanced photocatalytic activity of In2O3-decorated TiO210.1007/s00339-013-7965-z ↗
32. UV-enhanced formaldehyde sensor using hollow In2O3@TiO2 double-layer nanospheres at room temperature10.1021/acsami.2c19722 ↗
33. Hierarchical TiO2@In2O3 heteroarchitecture photoanodes: mechanistic study on interfacial charge carrier dynamics through water splitting and organic decomposition10.1016/j.apsusc.2019.02.196 ↗
34. Electron transport study of indium oxide as photoanode in DSSCs: a review10.1016/j.rser.2016.05.067 ↗
35. Atmospheric pressure chemical vapor deposition of indium oxide nanostructured films for photoelectrochemical application10.1016/j.rinp.2021.104187 ↗
36. Synthesis and enhanced photoelectrocatalytic activity of p-n junction Co3O4 /TiO2 nanotube arrays10.1016/j.apsusc.2012.09.160 ↗
37. Co3O4-modified TiO2 nanotube arrays via atomic layer deposition for improved visible-light photoelectrochemical performance10.1021/am506392y ↗
38. Co3O4/CdS energy-storing nanocomposite: a promising photoanode for photoelectrochemical cathodic protection in the dark10.1016/j.jallcom.2021.159340 ↗
39. Enhanced photoelectrochemical cathodic protection of stainless steel under visible light using Co3O4–ZnO-modified TiO2 nanotubes10.1007/s00339-024-07338-5 ↗
40. Effectiveness of MnO2 and V2O5 deposition on light fostered supercapacitor performance of WTiO2 nanotube: novel electrodes for photo-assisted supercapacitors10.1016/j.cej.2022.137941 ↗
41. Ag2S decorated TiO2 nanosheets grown on carbon fibers for photoelectrochemical protection of 304 stainless steel10.1016/j.apsusc.2019.07.234 ↗
42. Tailored fabrication of TiO2/In2O3 hybrid mesoporous nanofibers towards enhanced photocatalytic performance10.1016/j.colsurfa.2021.127455 ↗
43. Black Si-doped TiO2 nanotube photoanode for high-efficiency photoelectrochemical water splitting10.1039/C8RA00021B ↗
44. Scaling up the process of titanium dioxide nanotube synthesis and its effect on photoelectrochemical properties10.3390/ma14195686 ↗
45. Ag2S/CdS/TiO2 nanotube array films with high photocurrent density by spotting sample method10.1186/s11671-015-1089-7 ↗
46. Ti-Fe2O3/In2O3 as photoactive material: the role of the substrate in photoelectrochemical water oxidation10.1016/j.jallcom.2023.170924 ↗
47. Photoelectrochemical cathodic protection of stainless steel using W- and Cr-doped/codoped TiO2 nanotube thin film photoanodes10.1149/1945-7111/ac1b05 ↗
48. Fabrication of a Co3O4/ZnO heterostructure by electrochemical deposition10.20964/2021.12.37 ↗
49. Heterostructured catalysts for electrocatalytic and photocatalytic carbon dioxide reduction10.1002/adfm.201910768 ↗
50. Effect of microwave on the nanowire morphology, optical, magnetic, and pseudocapacitance behavior of Co3O410.1021/jp209165v ↗
51. High-efficiency photoelectrocatalytic hydrogen generation enabled by palladium quantum dots-sensitized TiO2 nanotube arrays10.1021/ja307449z ↗
52. Chromium-doped titanium oxide nanotubes grown via one-step anodization for efficient photocathodic protection of stainless steel10.1016/j.surfcoat.2021.127304 ↗
53. Morphological, structural, optical, and electrical study of nanostructured thin films: charge transport mechanism of p-type Co3O410.1016/j.matchemphys.2019.122059 ↗
54. Electronic structure and bonding properties of cobalt oxide in the spinel structure10.1103/PhysRevB.83.245204 ↗
55. Variant-localized high-concentration electrolyte without phase separation for low-temperature batteries
56. Co-precipitated Ni/Mn shell coated nano Cu-rich core structure: a phase-field study10.1016/j.jmrt.2022.09.032 ↗
57. Construction of II-type and Z-scheme binding structure in P-doped graphitic carbon nitride loaded with ZnO and ZnTCPP boosting photocatalytic hydrogen evolution10.1016/j.jcis.2023.08.033 ↗
58. Excellent microwave absorption performance of LaFeO3/Fe3O4/C perovskite composites with optimized structure and impedance matching10.1016/j.carbon.2023.118200 ↗
59. Design high performance field-effect, strain/gas sensors of novel 2D penta-like Pd2P2SeX (X= O, S, Te) pin-junction nanodevices: a study of transport properties10.1016/j.jallcom.2024.173417 ↗
60. Noble metal phosphides supported on CoNi metaphosphate for efficient overall water splitting10.1021/acsami.3c19077 ↗