Zinc oxide coating impact on corrosion of ZK60 magnesium alloys in simulated body fluid
Source abstract
Abstract
Magnesium alloys offer an alternative for applications in biodegradable implant devices within human body, eliminating the need for subsequent surgeries to remove metallic parts. Nevertheless, the uniform degradation rate of magnesium (Mg) alloys must be enhanced by applying surface coatings, preferably incorporating bactericidal and biocompatible agents, to improve the implant properties. In this study, magnesium alloys ZK60 (Mg, Zn, and Zr) and ZK60-Mm (Mg, Zn, and Zr with 1.5 % mass of rare-earth elements - mischmetal), both having a specific mass close to the bone, were investigated. The surfaces were coated with ZnO using physical vapor deposition (PVD) in the HiPIMS (High Power Impulse Magnetron Sputtering) mode. The corrosion resistance and degradation of the alloys were studied using electrochemical and immersion tests in simulated body fluid. Surface analysis and microstructures were characterized using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and X-ray Diffraction (XRD). The results showed that the ZnO coating favors osseointegration with hydroxyapatite formation after immersion in SBF. Moreover, electrochemical analysis indicates an enhancement in corrosion resistance. On average, the corrosion current density decreases by a factor of four for the ZK60 alloy and two for the ZK60-Mm alloy post-coating. The corrosion rate of ZnO-coated alloys is lower compared to that of uncoated alloys, showcasing the promising utility of this coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Surface modification of magnesium with a novel composite coating for application in bone tissue engineering10.1016/j.surfcoat.2021.128078 ↗
2. Wear behavior of extruded ZK60 magnesium alloy in simulated body fluid with different pH values10.1016/j.matchemphys.2021.124292 ↗
3. Corrosion resistance of Mg(OH)2/Mn(OH)2 hydroxide film on ZK60 Mg alloy10.3390/met12101760 ↗
4. Surface characteristics and corrosion resistance of biodegradable magnesium alloy ZK60 modified by Fe ion implantation and deposition10.1016/j.pnsc.2014.08.011 ↗
5. In vivo degradation behavior of magnesium alloy for bone implants with improving biological activity, mechanical properties, and corrosion resistance10.3390/ijms24021602 ↗
6. The contribution of dietary magnesium in farm animals and human nutrition10.3390/nu13020509 ↗
7. Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment10.1016/j.actbio.2008.05.014 ↗
8. In-vitro assessment of HA-Nb coating on Mg alloy ZK60 for biomedical applications10.1016/j.matchemphys.2019.04.037 ↗
9. Improving the corrosion resistance and osteogenic differentiation of ZK60 magnesium alloys by hydroxyapatite/graphene/graphene oxide composite coating10.1016/j.ceramint.2022.02.161 ↗
10. Biofunctionization of biodegradable magnesium alloy to improve the in vitro corrosion resistance and biocompatibility10.1016/j.apsusc.2018.04.235 ↗
11. Preparation and bioactivity of micro-arc oxidized calcium phosphate coatings10.1016/j.matchemphys.2013.06.013 ↗
12. Influence of ultrasonic shot peening on the microstructure and corrosion behavior of AZ80M magnesium alloy10.1016/j.jallcom.2024.173633 ↗
13. Corrosion-wear behavior of a biocompatible magnesium matrix composite in simulated body fluid10.1007/s40544-020-0361-8 ↗
14. Advances and challenges of biodegradable implant materials with a focus on magnesium-alloys and bacterial infections10.3390/met8070532 ↗
15. Investigating local corrosion processes of magnesium alloys with scanning probe electrochemical techniques: A review10.1016/j.jma.2022.09.024 ↗
16. Deposition methods for microstructured and nanostructured coatings on metallic bone implants: A review10.1155/2017/5812907 ↗
17. Application of sustainable polymers for reinforcing bio-corrosion protection of magnesium implants–a review
18. Protective nature of cerium-based oxides coating against Mg corrosion in Hanks’ balanced salt solution10.1016/j.corsci.2023.111255 ↗
19. Self-healing dicalcium phosphate dihydrate coating of biomedical magnesium and its in vitro biocompatibility evaluation10.1016/j.matlet.2024.135921 ↗
20. Influence of silver nanoparticles addition on antibacterial properties of PEO coatings formed on magnesium10.1016/j.apsusc.2024.159387 ↗
21. A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)10.1016/j.surfcoat.2014.08.043 ↗
22. Sputtering physical vapour deposition (PVD) coatings: A critical review on process improvement and market trend demands10.3390/coatings8110402 ↗
23. Influence of the bias-voltage, the argon pressure and the heating power on the structure and the tribological properties of HiPIMS sputtered MoSx films10.1016/j.surfcoat.2020.125358 ↗
24. Antibacterial activity of ZnO and CuO nanoparticles against gram positive and gram negative strains10.1016/j.msec.2019.109968 ↗
25. Bioactive ZnO coatings deposited by MAPLE - An appropriate strategy to produce efficient anti-biofilm surfaces10.3390/molecules21020220 ↗
26. In vitro corrosion behavior, bioactivity, and antibacterial performance of the silver-doped zinc oxide coating on magnesium alloy10.1002/maco.201709597 ↗
27. Effect of ZnO pore-sealing layer on anti-corrosion and in-vitro bioactivity behavior of plasma electrolytic oxidized AZ91 magnesium alloy10.1016/j.matlet.2019.126779 ↗
28. Impact of Ce-base mischmetal on the microstructure and mechanical behavior of ZK60 magnesium casting alloys10.1016/j.msea.2018.02.024 ↗
29. Corrosion behavior of as-cast ZK60 alloy modified with rare earth addition in sodium sulfate medium10.1016/j.corsci.2019.108092 ↗
30. Effect of Ce-base mischmetal addition on the microstructure and mechanical properties of hot-rolled ZK60 alloy10.1016/j.jma.2020.09.018 ↗
31. Casting in the semi-solid state of ZK60 magnesium alloy modified with rare earth addition10.4028/www.scientific.net/AMR.922.694 ↗
32. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
33. The effect of epoxy coating containing emeraldine base and hydrofluoric acid doped polyaniline on the corrosion protection of AZ91D magnesium alloy10.1016/j.corsci.2011.07.021 ↗
34. Effect of various additives on morphology and corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation10.1016/j.ceramint.2012.02.040 ↗
35. Microstructure and mechanical properties of extruded ZK60 magnesium alloy containing rare earth10.1179/026708304225012233 ↗
36. Calcium phosphate-based coatings on titanium and its alloys10.1002/jbm.b.30932 ↗
37. Novel bioactive materials developed by simulated body fluid evaluation: Surface-modified Ti metal and its alloys10.1016/j.actbio.2016.08.013 ↗
38. Corrosion mechanism applicable to biodegradable magnesium implants10.1016/j.mseb.2010.12.017 ↗
39. In vitro degradation and biocompatibility of a strontium-containing micro-arc oxidation coating on the biodegradable ZK60 magnesium alloy10.1016/j.apsusc.2013.10.113 ↗
40. The development of binary Mg–Ca alloys for use as biodegradable materials within bone10.1016/j.biomaterials.2007.12.021 ↗
41. New approach for improving anticorrosion and biocompatibility of magnesium alloys via polydopamine intermediate layer-induced hydroxyapatite coating
42. Synthesis of a novel nanostructured zinc oxide/baghdadite coating on Mg alloy for biomedical application: In-vitro degradation behavior and antibacterial activities10.1016/j.ceramint.2017.07.233 ↗
43. Theoretical study of Tris and Bistris effects on simulated body fluids10.1016/j.molliq.2007.12.003 ↗
44. Review—Electrochemical migration in electronic materials: Factors affecting the mechanism and recent strategies for inhibition10.1149/1945-7111/acb61a ↗
45. In vitro corrosion behavior, bioactivity, and antibacterial performance of the silver-doped zinc oxide coating on magnesium alloy10.1002/maco.201709597 ↗
46. In vitro corrosion resistance of a layer-by-layer engineered hybrid coating on ZK60 magnesium alloy10.3390/su14042459 ↗
47. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation10.1016/j.corsci.2009.10.016 ↗
48. Review of recent developments in the field of magnesium corrosion10.1002/adem.201400434 ↗
49. Non-stationarity in electrochemical impedance measurement of Mg-based materials in aqueous media10.1016/j.electacta.2023.143140 ↗
50. The inhibitory action of Bauhinia purpurea extracts on the corrosion of carbon steel in sulfuric acid medium10.1590/1980-5373-MR-2015-0494 ↗
51. Simultaneous improvement in surface mechanical properties and corrosion resistance of biomedical ZK60 alloy by Zr and C co-implantation10.1016/j.vacuum.2022.111642 ↗
52. On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy10.1016/j.electacta.2019.03.080 ↗